相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Insights into strengthening behavior of two-dimensional nanosheets in titanium matrix composites involving a novel MXene/Ti composite powder
Z. Q. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)
Direct synthesis and chemical vapor deposition of 2D carbide and nitride MXenes
Di Wang et al.
SCIENCE (2023)
Microstructural origin of anisotropic tensile ductility of Al-Si alloy manufactured by laser powder bed fusion
Yuki Otani et al.
SCRIPTA MATERIALIA (2023)
Highly ductile hypereutectic Al-Si alloys fabricated by selective laser melting
Yafeng Yang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)
Enhanced tensile ductility of an additively manufactured AlSi10Mg alloy by reducing the density of melt pool boundaries
Haoxiu Chen et al.
SCRIPTA MATERIALIA (2022)
Few-layered Ti3C2 MXene-coated Ti-6Al-4V composite powder for high-performance Ti matrix composite
L. Wang et al.
COMPOSITES COMMUNICATIONS (2022)
Preparation, microstructure and tensile properties of two dimensional MXene reinforced copper matrix composites
Mengqi Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Significant strengthening effect in few-layered MXene-reinforced Al matrix composites
Weiwei Zhou et al.
MATERIALS RESEARCH LETTERS (2021)
Microstructure and tensile properties of Ni nano particles modified MXene reinforced copper matrix composites
Mengqi Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Effects of 2D Ti3C2Tx (Mxene) on mechanical properties of ZK61 alloy
Yuchao Fan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Fracture resistance of AlSi10Mg fabricate d by laser powder b e d fusion
Moses J. Paul et al.
ACTA MATERIALIA (2021)
2D transition metal carbides (MXenes) in metal and ceramic matrix composites
Brian C. Wyatt et al.
NANO CONVERGENCE (2021)
Mechanical properties and frictional resistance of Al composites reinforced with Ti3C2Tx MXene
Jie Hu et al.
CHINESE CHEMICAL LETTERS (2020)
Strength-ductility trade-off via SiC nanoparticle dispersion in A356 aluminium matrix
R. Taherzadeh Mousavian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Tensile properties of carbon nanotubes reinforced aluminum matrix composites: A review
M. Jagannatham et al.
CARBON (2020)
There is plenty of space in the MXene layers: The confinement and fillings
Ming Lu et al.
JOURNAL OF ENERGY CHEMISTRY (2020)
Deformation-driven metallurgy of SiC nanoparticle reinforced aluminum matrix nanocomposites
Yuming Xie et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Size-dependent effects of Ti powders in the pure aluminum matrix composites reinforced by carbon nanotubes
X. Q. Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
3D printing of Al matrix composites through in situ impregnation of carbon nanotubes on Al powder
Kang Geng et al.
CARBON (2020)
Additive manufacturing of low-cost porous titanium-based composites for biomedical applications: Advantages, challenges and opinion for future development
Hooyar Attar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Electromagnetic shielding behavior of heat -treated Ti 3 C 2 T X MXene accompanied by structural and phase changes
Biao Ji et al.
CARBON (2020)
Planting carbon nanotubes within Ti-6Al-4V to make high-quality composite powders for 3D printing high-performance Ti-6Al-4V matrix composites
Yu Liu et al.
SCRIPTA MATERIALIA (2020)
Interface design based on Ti3C2 MXene atomic layers of advanced battery-type material for supercapacitors
Chengxing Lu et al.
ENERGY STORAGE MATERIALS (2020)
Control of MXenes' electronic properties through termination and intercalation
James L. Hart et al.
NATURE COMMUNICATIONS (2019)
A new approach to synthesise high strength nano-oxide dispersion strengthened alloys
Chunlei Qiu
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
AlSi10Mg alloy nanocomposites reinforced with aluminum-coated graphene: Selective laser melting, interfacial microstructure and property analysis
Zhanyong Zhao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
Nesma T. Aboulkhair et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting
J. Delahaye et al.
ACTA MATERIALIA (2019)
Microstructures and electrical and mechanical properties of Cu-Cr alloys fabricated by selective laser melting
Sohei Uchida et al.
MATERIALS & DESIGN (2019)
Exploring the size effects of Al4C3 on the mechanical properties and thermal behaviors of Al-based composites reinforced by SiC and carbon nanotubes
Baisong Guo et al.
CARBON (2018)
3D printing graphene-aluminum nanocomposites
Zengrong Hu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Aluminum/graphene composites with enhanced heat-dissipation properties by in-situ reduction of graphene oxide on aluminum particles
Le Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
The effect of TiC:CNT mixing ratio and CNT content on the mechanical and tribological behaviors of TiC modified CNT-reinforced Al-matrix nanocomposites
Farhad Saba et al.
POWDER TECHNOLOGY (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Effect of heat treatment on the microstructure and anisotropy in mechanical properties of A357 alloy produced by selective laser melting
Kun V. Yang et al.
MATERIALS & DESIGN (2018)
Pressure-induced shear and interlayer expansion in Ti3C2 MXene in the presence of water
Michael Ghidiu et al.
SCIENCE ADVANCES (2018)
Aluminium based in-situ composite fabrication through friction stir processing: A review
Namrata Gangil et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Selective laser melting of AlSi10Mg: Effects of scan direction, part placement and inert gas flow velocity on tensile strength
Ahmad Bin Anwar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Tensile properties and related microstructural aspects of hypereutectic Al-Si alloys directionally solidified under different melt superheats and transient heat flow conditions
Rodrigo V. Reyes et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Strengthening mechanism in graphene nanoplatelets reinforced aluminum composite fabricated through spark plasma sintering
Ankita Bisht et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Strength and strain hardening of a selective laser melted AlSi10Mg alloy
B. Chen et al.
SCRIPTA MATERIALIA (2017)
Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility
X. P. Li et al.
ACTA MATERIALIA (2017)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Mechanical properties and microstructure characterization of spark plasma and conventional sintering of Al-SiC-TiC composites
Ehsan Ghasali et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Influence of length-scales on spatial distribution and interfacial characteristics of B4C in a nanostructured Al matrix
Lin Jiang et al.
ACTA MATERIALIA (2015)
Synthesis and thermal stability of two-dimensional carbide MXene Ti3C2
Zhengyang Li et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2015)
Synthesis and thermal stability of two-dimensional carbide MXene Ti3C2
Zhengyang Li et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2015)
Microstructural and mechanical behavior of multi-walled carbon nanotubes reinforced Al-Mg-Si alloy composites in aging treatment
Katsuyoshi Kondoh et al.
CARBON (2014)
Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment
K. G. Prashanth et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Reinforcement with graphene nanosheets in aluminum matrix composites
Jingyue Wang et al.
SCRIPTA MATERIALIA (2012)
Two-Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Michael Naguib et al.
ADVANCED MATERIALS (2011)
Kinetics of phase separation and ordering in alloys
VG Vaks
PHYSICS REPORTS-REVIEW SECTION OF PHYSICS LETTERS (2004)
Abrasive wear behaviour of Al-SiC composites produced by pressure infiltration technique
E Candan et al.
WEAR (2001)