☆ 4.7 Article

Effect of grain orientation and precipitates on the superelasticity of Fe-Ni-Co-Al polycrystalline alloys

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Abnormal grain growth of FeMnAlNiCo shape memory alloys during directional recrystallisation

Guangda Zhao et al.

Summary: Polycrystalline FeMnAlNi-based alloys exhibit poor pseudoelasticity due to grain constraint, but their pseudoelasticity can be improved by increasing grain size through directional recrystallization (DR). The study investigates the effect of DR parameters on columnar grain size and growth mechanisms, and the results show that FeMnAlNiCo shape memory alloys (SMAs) can achieve large grain sizes above 20 mm and even exceed 50 mm through DR. The work provides important guidance for microstructural control in FeMnAlNi-based SMAs.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strong and ductile FeNiCoAl-based high-entropy alloys for cryogenic to elevated temperature multifunctional applications

Cheng Zhang et al.

Summary: This research reports on a non-equiatomic, heterostructured high-entropy alloy FeNiCoAlTaB that exhibits remarkable combinations of mechanical properties across a wide temperature range. The alloy achieves its behavior by activating multiple individual mechanisms at different temperatures, providing a methodology for designing and fabricating multifunctional high-entropy alloys.

ACTA MATERIALIA (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Columnar grain growth of superelastic CuAlMn alloy during directional recrystallization

Xinghao Li et al.

Summary: Directional recrystallization (DR) was used to obtain columnar grains in a superelastic CuAlMn alloy. The microstructural evolution of the alloy during DR and the abnormal grain growth mechanism for the formation of columnar grains were investigated. It was found that columnar grains could be obtained when the hot-zone temperature was above the alpha-phase solvus temperature of -730 degrees C. The optimum drawing velocities for obtaining columnar grains with the largest aspect ratio increased with increasing hot-zone temperatures.

MATERIALS CHARACTERIZATION (2023)

添加到收藏夹

Article Engineering, Mechanical

Enhanced strength-ductility synergy via novel bifunctional nano-precipitates in a high-entropy alloy

Liyuan Liu et al.

Summary: A new Ni-35(CoFe)(55)V5Nb5 high-entropy alloy with a novel bifunctional L-12-Ni3Nb nano-precipitate was developed to enhance the strength and ductility synergy of the alloy, showing high yield strength, ultimate tensile strength, and remarkable elongation. The novel nano-precipitates play a dual role in improving the alloy properties through precipitation strengthening and lowering the stacking fault energy for better work-hardening ability and plasticity.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Chemistry, Physical

Coupling precipitation strengthening and transformation induced plasticity to produce a superior combination of strength and ductility in a high entropy alloy

Kailan Huang et al.

Summary: A new high-entropy alloy with excellent strength and ductility has been developed in this study. The high yield strength and good ductility are achieved through the precipitation strengthening and phase transformation mechanism. The coupling of precipitation strengthening and TRIP effect provides a suitable strategy to overcome the trade-off between strength and ductility.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Insights into the martensitic transformation kinetics and mechanical properties of quaternary Ti-Ni-Nb-V shape memory alloys

Xiaoyang Yi et al.

Summary: The systematic investigation on the effect of V addition on Ti-Ni-Nb shape memory alloys reveals that adding a moderate V content can adjust the microstructural evolution, martensitic transformation behaviors, and mechanical performances of the alloys to achieve lower martensitic transformation temperatures and higher yield strength.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Atomic study of hydrogen behaviors at n-ary sumation 3(111) grain boundary in equiatomic CoCrNi and CoCrNiFe alloys

Hua-Qing Guan et al.

Summary: In this study, the role of specific elements in hydrogen embrittlement mechanism in CoCrNi and CoCrNiFe alloys was examined using density functional theory calculations. It was found that Cr restricts the hydrogen atoms to specific potential positions, suppressing hydrogen segregation. The dipole moment interaction between hydrogen and iron atoms weakens the binding of hydrogen atoms. The lattice distortion induced trapping effect provides higher hydrogen diffusion barriers at n-ary sumation 3 grain boundaries compared to pure nickel.

TUNGSTEN (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Directional recrystallisation processing: a review

Chao Yang et al.

Summary: Directional recrystallisation processing is a solid-state process that aims to achieve columnar grain structures or single crystals to enhance mechanical properties. The resulting microstructures are influenced by processing parameters like temperature gradient, hot-zone velocity, and annealing temperature, as well as microstructural parameters like stored energy, grain size, initial texture, solutes, and both soluble and insoluble particles.

INTERNATIONAL MATERIALS REVIEWS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Clustering, nano-scale precipitation and strengthening of steels

Zhiping Xiong et al.

Summary: Continuous innovations in design of advanced structural steels play a crucial role in the future progress of manufacturing, automotive and construction industries. Events at nano and atomic scales are essential in controlling steel strength, with strengths of 1-1.5 GPa realized in nano-scale precipitation strengthened steels. Modern characterization techniques allow for insight into mechanisms of solute atoms clustering, nano-precipitate formation, and interactions with dislocations contributing to strength.

PROGRESS IN MATERIALS SCIENCE (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Nanoprecipitate-Strengthened High-Entropy Alloys

Liyuan Liu et al.

Summary: HEAs can be tuned to a simple phase with unique alloy characteristics, such as high strength and hardness with low ductility in BCC or HCP structures, and a combination of considerable ductility, excellent corrosion and radiation resistance in FCC structures. Precipitation strengthening is an effective method to enhance the strength of HEAs by forming fine and stable nanoscale precipitates. This paper reviews the recent progress in nanoprecipitate-strengthened HEAs and highlights alloy-design strategies and control of nanoscale precipitates.

ADVANCED SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructures and mechanical properties of Ta-Nb-Zr-Ti-Al refractory high entropy alloys with varying Ta/Ti ratios

Ya-Guang Dong et al.

Summary: This study investigates the compositional dependence of microstructures and mechanical properties in refractory high entropy alloys. Different compositions result in significant microstructure and mechanical property changes, demonstrating the tunability of strength-ductility balance in this RHEA system.

TUNGSTEN (2021)

添加到收藏夹

Article Engineering, Industrial

Growing Fe-Mn-Al-Ni single crystals by combining directional annealing and thermal cycling

Juan Manuel Vallejos et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

TWIP and TRIP-associated mechanical behaviors of Fex(CoCrMnNi)100-x medium-entropy ferrous alloys

Hyeon-Uk Jeong et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of soluble particles on microstructural evolution during directional recrystallization

Chao Yang et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

The effect of heat treatment on the precipitation hardening in FeNiCoAlTa single crystals

M. Czerny et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Cooperative deformation in high-entropy alloys at ultralow temperatures

Muhammad Naeem et al.

SCIENCE ADVANCES (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Iron-based superelastic alloys with near-constant critical stress temperature dependence

Ji Xia et al.

SCIENCE (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Texture Formation in a Polycrystalline Fe-Ni-Co-Al-Ti-B Shape Memory Alloy

Doyup Lee et al.

ISIJ INTERNATIONAL (2020)

添加到收藏夹

Article Chemistry, Physical

The crystallization process, microstructure, martensitic transformation and mechanical properties of Ti-Ni-Zr alloy ribbons

Xiaoyang Yi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Design of D022 superlattice with superior strengthening effect in high entropy alloys

Feng He et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Chemistry, Physical

Deposition and phase transformation behaviors of Ti-Ni-Hf-Cu quaternary shape memory alloy thin films

Jun Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Chemistry, Physical

Effects of laser remelting speeds on microstructure, immersion corrosion, and electrochemical corrosion of arc-sprayed amorphous Al-Ti-Ni coatings

Haixiang Chen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Grain boundary precipitation of tantalum and NiAl in superelastic FeNiCoAlTaB alloy

Cheng Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Thermomechanical Processing on Texture and Superelasticity in Fe-Ni-Co-Al-Ti-B Alloy

Doyup Lee et al.

SHAPE MEMORY AND SUPERELASTICITY (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Intrinsic properties and strengthening mechanism of monocrystalline Ni-containing ternary concentrated solid solutions

K. Jin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation

Suihe Jiang et al.

NATURE (2017)

添加到收藏夹

Proceedings Paper Engineering, Multidisciplinary

Enhancement of Superelasticity in Fe-Ni-Co-Based Shape Memory Alloys by Microstructure and Texture Control

Huadong Fu et al.

INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017 (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

A precipitation-hardened high-entropy alloy with outstanding tensile properties

J. Y. He et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhanced mechanical properties of polycrystalline Cu-Al-Ni alloy through grain boundary orientation and composition control

Huadong Fu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Abnormal grain growth induced by cyclic heat treatment in Fe-Mn-Al-Ni superelastic alloy

T. Omori et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Chemistry, Physical

Coherency of ordered gamma ' precipitates and thermoelastic martensitic transformation in FeNiCoAlTaB alloys

Yonghong Geng et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Superelastic anisotropy characteristics of columnar-grained Cu-Al-Mn shape memory alloys and its potential applications

Ji-Li Liu et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Chemistry, Physical

Ductility enhancement and superelasticity in Fe-Ni-Co-Al-Ti-B polycrystalline alloy

Doyup Lee et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

The roles of grain orientation and grain boundary characteristics in the enhanced superelasticity of Cu71.8Al17.8Mn10.4 shape memory alloys

Ji-Li Liu et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review of shape memory alloy research, applications and opportunities

Jaronie Mohd Jani et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Measurement of the effective γ/γ′ lattice mismatch during high temperature creep of Ni-based single crystal superalloy

Laura Dirand et al.

MATERIALS CHARACTERIZATION (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Thermoelastic martensitic transformation and superelasticity in Fe-Ni-Co-Al-Nb-B polycrystalline alloy

T. Omori et al.

SCRIPTA MATERIALIA (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Superelasticity and fatigue in oligocrystalline shape memory alloy microwires

Stian M. Ueland et al.

ACTA MATERIALIA (2012)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

THEORY ANALYSIS ON THE NEW GENERATION OF CLEAN STEEL PRODUCTION PROCESS

Xu Kuangdi et al.

ACTA METALLURGICA SINICA (2012)

添加到收藏夹

Review Materials Science, Multidisciplinary

Shape memory materials

W. M. Huang et al.

MATERIALS TODAY (2010)

添加到收藏夹

Article Multidisciplinary Sciences

Ferrous Polycrystalline Shape-Memory Alloy Showing Huge Superelasticity

Y. Tanaka et al.

SCIENCE (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dynamics and mechanism of columnar grain growth of pure iron under directional annealing

Z. W. Zhang et al.

ACTA MATERIALIA (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

An EBSP study of directionally recrystallized cold-rolled nickel

J Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

添加到收藏夹

Article Instruments & Instrumentation

The gamma/gamma ' mismatch in Ni based superalloys: In situ measurements during a creep test

F Diologent et al.

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.