相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Achieving grain refinement of a-Al and Si modification simultaneously by La-B-Sr addition in Al-10Si alloys
Qun Luo et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)
A novel core-shell TiCx particle by modifying TiCx with B element and the preparation of the (TiCx + AlN)/Al composite
Lei Ren et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
Dynamic recrystallization and precipitation behavior of a novel Sc, Zr alloyed Al-Zn-Mg-Cu alloy during hot deformation
Chenglong Xu et al.
MATERIALS CHARACTERIZATION (2022)
Hot deformation behavior of CNTs/Al-Li composite prepared by powder metallurgy
Lei Jia et al.
CARBON LETTERS (2022)
Understanding grain refining and anti Si-poisoning effect in Al-10Si/Al-5Nb-B system
Yang Li et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Fabrication of fine grain structures in Al matrices at elevated temperature by the stimulation of dual-size particles
Jun Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Kinetic model for describing continuous and discontinuous dynamic recrystallization behaviors of 2195 aluminum alloy during hot deformation
Jingjing Zhang et al.
MATERIALS CHARACTERIZATION (2021)
Effect of TiC nanoparticles on the hot deformation behavior of AA7075 aluminum alloy
Cheng Cong Huang et al.
MATERIALS CHARACTERIZATION (2021)
Effect of Zn content on the dynamic softening of Al-Zn-Mg-Cu alloys during hot compression deformation
Jie Tang et al.
VACUUM (2021)
Microstructure evolution and hot deformation behavior of carbon nanotube reinforced 2009Al composite with bimodal grain structure
K. Ma et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Enhancing high-temperature strength of (B4C+Al2O3)/Al designed for neutron absorbing materials by constructing lamellar structure
Y. N. Zan et al.
COMPOSITES PART B-ENGINEERING (2020)
Insight into Si poisoning on grain refinement of Al-Si/Al-5Ti-B system
Yang Li et al.
ACTA MATERIALIA (2020)
Hot deformation behavior of the AA6016 matrix composite reinforced with in situ ZrB2 and Al2O3 nanoparticles
Zheng Fang et al.
MATERIALS RESEARCH EXPRESS (2020)
Abnormal hot deformation behavior in a metallic-glass-reinforced Al-7075 composite
M. S. Xie et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Constitutive flow behavior and microstructural evolution of 17 vol% SiCp/7055Al composite during compression at elevated temperature
Binbin Tang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Grain refinement in hot working of 2219 aluminium alloy: On the effect of deformation mode and loading path
X. Zeng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
In-situ observation of grain refinement dynamics of hypoeutectic Al-Si alloy inoculated by Al-Ti-Nb-B alloy
Jin Xu et al.
SCRIPTA MATERIALIA (2020)
A CDRX-based material model for hot deformation of aluminium alloys
Yibo Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Microstructure evolution and high temperature tensile properties of AlNp/Al-Fe composites induced by microalloying
Xia Ma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Revealing the influence of pre-precipitation microstructure on hot workability in an Al-Cu-Mg-Zr alloy
Guowei Bo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
EBSD, XRD and SRS characterization of a casting Al-7wt%Si alloy processed by equal channel angular extrusion: Dislocation density evaluation
Zahra Zribi et al.
MATERIALS CHARACTERIZATION (2019)
Analysis of flow stress and microstructure during hot compression of 6099 aluminum alloy (AA6099)
Ahmad Chamanfar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructure evolution and physical-based diffusion constitutive analysis of Al-Mg-Si alloy during hot deformation
Shuhui Liu et al.
MATERIALS & DESIGN (2019)
Reinforcement in Al Matrix Composites: A Review of Strengthening Behavior of Nano-Sized Particles
Run Geng et al.
ADVANCED ENGINEERING MATERIALS (2018)
Hot deformation behavior and mechanism of hybrid aluminum-matrix composites reinforced with micro-SiC and nano-TiB2
Xinrong Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Constitutive equation and model validation for a 31 vol.% B4Cp/6061Al composite during hot compression
L. Zhou et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Enhanced elevated-temperature mechanical properties of Al-Mn-Mg containing TiC nano-particles by pre-strain and concurrent precipitation
Qinglong Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Cr-induced morphology change of primary Mn-rich phase in Al-Si-Cu-Mn heat resistant aluminum alloys and its contribution to high temperature strength
Guangjin Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Al-based composites reinforced with AlB2, AlN and BN phases: Experimental and theoretical studies
Alexander E. Steinman et al.
MATERIALS & DESIGN (2018)
Hot deformation mechanisms and microstructure evolution of SiCp/2014Al composite
Zhiye Huang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Suppressing Al2O3 nanoparticle coarsening and Cu nanograin growth of milled nanostructured Cu-5vol.%Al2O3 composite powder particles by doping with Ti
Dengshan Zhou et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)
Hot deformation behavior of Zr-1%Nb alloy: Flow curve analysis and microstructure observations
Abdollah Saboori et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Preferred orientation and interfacial structure in extruded nano-Al3BC/6061 Al
Yongfeng Zhao et al.
MATERIALS & DESIGN (2017)
A low-cost hierarchical nanostructured beta-titanium alloy with high strength
Arun Devaraj et al.
NATURE COMMUNICATIONS (2016)
Constitutive equation and processing maps of an Al-Mg-Si aluminum alloy: Determination and application in simulating extrusion process of complex profiles
Yuanyuan Dong et al.
MATERIALS & DESIGN (2016)
A review of dynamic recrystallization phenomena in metallic materials
K. Huang et al.
MATERIALS & DESIGN (2016)
Hot deformation behavior of in situ nano ZrB2 reinforced 2024Al matrix composite
Xizhou Kai et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Quantification of the strengthening effect of reinforcements during hot deformation of aluminum-based composites
Hamed Mirzadeh
MATERIALS & DESIGN (2015)
Hot deformation behavior of an aluminum-matrix hybrid nanocomposite fabricated by friction stir processing
F. Khodabakhshi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Microstructures and mechanical properties of the Al2014 composites reinforced with bimodal sized SiC particles
Long-Jiang Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Hot deformation and processing maps of Al2O3/Al composites fabricated by flake powder metallurgy
Bai-feng Luan et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
Kaka Ma et al.
ACTA MATERIALIA (2014)
Effect of Nb and C on the hot flow behavior of Nb microalloyed steels
Hai-lian Wei et al.
MATERIALS & DESIGN (2014)
Hot deformation behavior of AA7085 aluminum alloy during isothermal compression at elevated temperature
Wenyi Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Comparative hot deformation characters of Al-Mn-Mg-RE alloy and Al-Mn-Mg-RE-Ti alloy
Fulin Jiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Hot deformation behavior and processing map of a typical Ni-based superalloy
Dong-Xu Wen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
Taku Sakai et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Hot deformation behaviors of 35%SiCp/2024Al metal matrix composites
Shi-ming Hao et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
Effect of hybrid reinforcement on crack initiation and early propagation mechanisms in cast metal matrix composites during low cycle fatigue
A. K. M. Asif Iqbal et al.
MATERIALS & DESIGN (2013)
Quantitative Analysis of Work Hardening and Dynamic Softening Behavior of low carbon alloy Steel Based on the Flow Stress
Meng-han Wang et al.
MATERIALS & DESIGN (2013)
Microstructure, strengthening mechanisms and hot deformation behavior of an oxide-dispersion strengthened UFG Al6063 alloy
H. Asgharzadeh et al.
MATERIALS CHARACTERIZATION (2013)
SAP-like ultrafine-grained Al composites dispersion strengthened with nanometric AlN
M. Balog et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Role of hybrid ratio in microstructural, mechanical and sliding wear properties of the Al5083/Graphitep/Al2O3p a surface hybrid nanocomposite fabricated via friction stir processing method
A. Mostafapour Asl et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Evolution of activation energy during hot deformation of AA7150 aluminum alloy
Cangji Shi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
The effect of solute on discontinuous dynamic recrystallization
D. G. Cram et al.
ACTA MATERIALIA (2012)
Analysis of hot deformation behavior of Al 5083-TiC nanocomposite using constitutive and dynamic material models
V. Senthilkumar et al.
MATERIALS & DESIGN (2012)
Hot deformation behaviour and flow stress prediction of 7075 aluminium alloy powder compacts during compression at elevated temperatures
M. A. Jabbari Taleghani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
The flow behavior modeling of cast A356 aluminum alloy at elevated temperatures considering the effect of strain
N. Haghdadi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Dynamic restoration and microstructural evolution during hot deformation of a P/M Al6063 alloy
H. Asgharzadeh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Characterization of flow behavior and microstructural evolution of Al-Zn-Mg-Sc-Zr alloy using processing maps
Bo Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Study of hot deformation of an Al-Cu-Mg alloy using processing maps and microstructural characterization
C. M. Cepeda-Jimenez et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
High-temperature deformation and structural restoration of a nanostructured Al alloy
H. Asgharzadeh et al.
SCRIPTA MATERIALIA (2012)
Forming behavior and workability of 6061/B4CP composite during hot deformation
Huizhong Li et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Mechanical behavior of ultrafine-grained Al composites reinforced with B4C nanoparticles
Zhihui Zhang et al.
SCRIPTA MATERIALIA (2011)
High temperature deformation behavior of Al-Cu-Mg alloys micro-alloyed with Sn
Sanjib Banerjee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Hot deformation behavior of 2026 aluminum alloy during compression at elevated temperature
Xudong Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Investigation of aluminum-based nanocomposites with ultra-high strength
Y. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Flow behavior and microstructural evolution of Al-Cu-Mg-Ag alloy during hot compression deformation
Xiao Yan Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Analysis of the mechanical properties and deformation behavior of nanostructured commercially pure Al processed by equal channel angular pressing (ECAP)
M. Reihanian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Constitutive analysis of wrought magnesium alloy Mg-AL4-Znl
F. A. Slooff et al.
SCRIPTA MATERIALIA (2007)
Development of processing maps for 2124Al/SiCp composites
S. Ramanathan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Effects of Ti additions on the nanostructure and creep properties of precipitation-strengthened Al-Sc alloys
ME van Dalen et al.
ACTA MATERIALIA (2005)
Pure Al matrix composites produced by vacuum hot pressing: tensile properties and strengthening mechanisms
F Tang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Direct observation of the behavior of grain boundaries during continuous dynamic recrystallization in an Al-4Mg-0.3Sc alloy
LM Dougherty et al.
ACTA MATERIALIA (2003)
A model of continuous dynamic recrystallization
S Gourdet et al.
ACTA MATERIALIA (2003)
Elevated temperature deformation behavior of discontinuous-reinforced titanium aluminide matrix composites
JS Marte et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Carbide stoichiometry in TiCx and Cu-TiCx produced by self-propagating high-temperature synthesis
N Zarrinfar et al.
SCRIPTA MATERIALIA (2002)
Strain rate sensitivity of ultra-low carbon steels
S Saimoto et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
分享论文
