☆ 4.7 Article

L12-(Al,Si)3Ti+TiC hybrids reinforced laser welded SiCp/2A14Al joint with extraordinary strength

MATERIALS CHARACTERIZATION (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Multidisciplinary

Achieving simultaneous enhancement of strength and ductility in Al matrix composites by employing the synergetic strengthening effect of micro- and nano-SiCps

Kan Liu et al.

Summary: The incorporation of micro-and nano-sized SiC particles into an aluminum matrix through powder metallurgy results in a unique ultrafine-grained microstructure. The dual-scale reinforcements enhance dislocation accumulation and strain hardening capacity. The composites with both micro-SiC particles and nano-SiC particles exhibit improved tensile properties compared to composites with only micro-SiC particles.

COMPOSITES PART B-ENGINEERING (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Breaking the strength-ductility trade-off in additively manufactured aluminum alloys through grain structure control by duplex nucleation

Jinliang Zhang et al.

Summary: This paper proposes a novel duplex nucleation mechanism to control the grain structure of additively manufactured AlCuMgTi-TiB2 composites for achieving a homogeneous equiaxed grain structure and breaking the strength-ductility trade-off. The results show that the proposed alloy design approach and duplex nucleation mechanism can guide the tailoring of the microstructure and mechanical properties of additively manufactured aluminum parts.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

In situ study on fracture behaviors of SiC/2A14Al composite joint: Co-construction of microstructure and mechanical properties via laser welding

Mingyang Zhang et al.

Summary: This study investigated the fracture characteristics and damage mechanisms of a notorious SiC/2A14Al joint, and found that the sandwich eutectic microstructure inhibited crack propagation and dispersed extra stress. A rapid solidification process strategy was designed to improve the mechanical properties of the joint, and a joint with high tensile strength was successfully prepared.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Engineering, Industrial

Microstructure and mechanical properties of laser welded-brazed titanium/aluminum joints assisted by titanium mesh interlayer

Zhijie Zhang et al.

Summary: This study proposed a new method of using a titanium mesh interlayer in laser welding-brazing aluminum and titanium to enhance the load capacity of Ti/Al joints. Experimental results revealed that the titanium mesh improved the spreading and wetting abilities of molten aluminum on the titanium surface, resulting in the formation of Al3Ti intermetallic compounds through the Ti/Al interface reaction. These improvements increased the microhardness and load capacity of the joints.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Elimination of extraordinarily high cracking susceptibility of aluminum alloy fabricated by laser powder bed fusion

Holden Hyer et al.

Summary: This study designs an aluminum alloy with high cracking susceptibility and demonstrates the ability to reduce solidification cracking tendencies by adding small amounts of Sc and Zr alloying elements. Good tensile mechanical properties were achieved through a simple heat treatment.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhanced strength and ductility in Al-Zn-Mg-Cu alloys fabricated by laser powder b e d fusion using a synergistic grain-refining strategy

Xiaohui Liu et al.

Summary: This study presents a synergistic grain-refining strategy for high-strength aluminum alloys fabricated by additive manufacturing. By incorporating TiC and TiH2 particles, the microstructure of Al-Zn-Mg-Cu alloys during the laser powder bed fusion process was controlled, resulting in crack-free alloys with significantly refined grains. The introduction of TiC nanoparticles improved the density of nucleation sites and physically blocked grain growth, leading to enhanced mechanical properties.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Inhibiting weld cracking in high-strength aluminium alloys

Yanan Hu et al.

Summary: In this study, the authors quantified the softening mechanisms in the fine equiaxed zone (FQZ) and proposed a hybrid welding strategy to mitigate the intergranular failure and increase weld strength in 7000 series aluminum alloys.

NATURE COMMUNICATIONS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure evolution and mechanical properties of the electron-beam welded joints of cast Al-Cu-Mg-Ag alloy

Jian Wang et al.

Summary: The microstructures, hardness distribution and strengthening mechanisms of the electron-beam welded joints of cast Al-Cu-Mg-Ag alloy plate were investigated. It was found that the precipitation of fine Omega, theta' plates and dispersed precipitates after post-welding heat treatment is the main reason for the increase in strength of the welded joint.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Understanding the refinement of grains in laser surface remelted Al-Cu alloys

M. N. Patel et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Inoculation treatment of an additively manufactured 2024 aluminium alloy with titanium nanoparticles

Qiyang Tan et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain refinement mechanisms in additively manufactured nano-functionalized aluminum

J. Hunter Martin et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of post-weld heat treatment on double-sided friction stir welded joint of 120 mm ultra-thick SiCp/Al composite plates

Qi Qiao et al.

MATERIALS CHARACTERIZATION (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructural evolution and mechanical properties of laser beam welded joints between pure V and 17-4PH stainless steel

Nana Kwabena Adomako et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Selective laser melting of a high strength Al-Mn-Sc alloy: Alloy design and strengthening mechanisms

Qingbo Jia et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: A state of the art review

W. H. Yu et al.

PROGRESS IN MATERIALS SCIENCE (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Suppressed negative influence of natural aging in SiCp/6092Al composites

S. Z. Zhu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting

Joseph R. Croteau et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Dissimilar welding between Ti-6Al-4V and 17-4PH stainless steel using a vanadium interlayer

Nana Kwabena Adomako et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Keyhole formation and thermal fluid flow-induced porosity during laser fusion welding in titanium alloys: Experimental and modelling

Chinnapat Panwisawas et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Laser joining of NiTi to Ti6Al4V using a Niobium interlayer

J. P. Oliveira et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermodynamic investigation on phase formation in the Al-Si rich region of Al-Si-Ti system

Yang Li et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Irradiation-induced disordering and amorphization of Al3Ti-based intermetallic compounds

Jeong-Yong Park et al.

JOURNAL OF NUCLEAR MATERIALS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of resistance spot welded AZ31/AA5754 using a nickel interlayer

M. Sun et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Python Materials Genomics (pymatgen): A robust, open-source python library for materials analysis

Shyue Ping Ong et al.

COMPUTATIONAL MATERIALS SCIENCE (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study on electron beam weld joints between pure vanadium and SUS316L stainless steel

Shuhei Nogami et al.

JOURNAL OF NUCLEAR MATERIALS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of the thickness of Cu filler metal on the microstructure and properties of laser-welded TiNi alloy and stainless steel joint

Hongmei Li et al.

MATERIALS & DESIGN (2013)

添加到收藏夹

Article Optics

Laser welding of TiNi shape memory alloy and stainless steel using Co filler metal

Hongmei Li et al.

OPTICS AND LASER TECHNOLOGY (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Feasibility study of resistance spot welding of dissimilar Al/Mg combinations with Ni based interlayers

P. Penner et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Laser welding of TiNi shape memory alloy and stainless steel using Ni interlayer

H. M. Li et al.

MATERIALS & DESIGN (2012)

添加到收藏夹

Article Engineering, Mechanical

Fatigue crack growth of SiC particle reinforced metal matrix composites

N. Chawla et al.

INTERNATIONAL JOURNAL OF FATIGUE (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

An analysis of the relationship between grain size, solute content, and the potency and number density of nucleant particles

M Easton et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

A model of grain refinement incorporating alloy constitution and potency of heterogeneous nucleant particles

MA Easton et al.

ACTA MATERIALIA (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.