☆ 4.7 Article

Fabrication and electromagnetic absorbing properties of CNTs modified PDCs-SiOC

MATERIALS CHARACTERIZATION (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Oxidation resistance behavior of SiC nanowires/Si layer on the C/SiC composites

Bo Wang et al.

Summary: To reduce delamination or spallation of the Si layer during thermal cycles and enhance its oxidation resistance, a SiC-nanowire-reinforced Si layer (SiCnws-Si layer) was prepared on carbon/silicon carbide (C/SiC) composites using chemical vapor reaction and atmospheric plasma spray (APS). The introduction of SiC nanowires improved the bonding strength, toughness, and thermal stress relief of the Si layer. Results showed that the SiCnws-Si-coated C/SiC composites had lower weight loss (8.3%-60.9%) than Si layer after 12 thermal cycles between room temperature and 1673 K, and the tensile strength of the SiCnws-Si-coated C/SiC composites exceeded 3.9 MPa due to the bridging effect of SiC nanowires on the interface.

MATERIALS CHARACTERIZATION (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optimization of Ti with modified SiC ceramics for electromagnetic absorption properties

Hanjun Wei et al.

Summary: SiCTi ceramics were prepared by PDCs technology using Ti modified polycarbosilane (PCS), which achieved adjustable dielectric and EM wave absorption properties. The addition of Ti reduced free carbon and induced the growth of SiCnws, resulting in a three-dimensional network structure and multiple loss media. By constructing hetero-interfaces and optimizing the composition, effective EM wave absorption can be achieved in high temperature applications.

MATERIALS CHARACTERIZATION (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

A new nano-scale rhombic precipitate in the SiC ceramic manufactured by milling-sintering process

Jing-kun Li et al.

Summary: A new nano-scale rhombic precipitate was discovered in SiC with 8 wt% Mg additive. TEM was used to characterize the distribution, shape, size, and microstructure of the precipitates, as well as to determine its formation mechanism. The rhombic precipitates were found to be under 65 nm in size and extensively distributed with high density. They contained a significant amount of Fe from the collision between the stainless steel pot and the milling balls, as well as Fe3Si generated during sintering. The Fe3Si precipitates and SiC matrix exhibited specific crystal orientations.

MATERIALS CHARACTERIZATION (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Defect-Engineered Graphene/Si3N4 Multilayer Alternating Core-Shell Nanowire Membrane: A Plainified Hybrid for Broadband Electromagnetic Wave Absorption

Jie Liang et al.

Summary: To tackle electromagnetic pollution, broadband electromagnetic wave absorption materials are needed. This study presents a theory-directed strategy to design simplified absorption materials by optimizing nanostructures, resulting in enhanced absorption bandwidth and stability.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Thermodynamics

Excellent heat transfer enhancement of CNT-metal interface by loading carbyne and metal nanowire into CNT

Hanying Zou et al.

Summary: The study investigates the mechanism and enhancement strategy of interfacial heat transfer between CNT and metal by calculating thermal resistance and analyzing factors like atomic vibration density. Additionally, the effects of loading carbyne and metal nanowires in CNT on heat transfer performance were also studied.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Structure-dependent electromagnetic wave absorbing properties of bowl-like and honeycomb TiO2/CNT composites

Hua Jian et al.

Summary: This study fabricated bowl-like and honeycomb titanium dioxide/carbon nanotube (TiO2/CNT) composites and found that the bowl-like structure had advantages in dielectric polarization and multiple reflections, while the honeycomb structure had better impedance matching characteristics. The bowl-like composite exhibited a wide effective absorption band at 4.2 GHz and is suitable for lightweight and highly efficient electromagnetic wave absorbing materials.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Review Crystallography

On the Vitality of the Classical Theory of Crystal Nucleation; Crystal Nucleation in Pure Own Melt; Atmospheric Ice and Snow; Ice in Frozen Foods

Christo N. Nanev

Summary: The Classical Nucleation Theory (CNT) has remained influential due to its strong thermodynamic basis. This review paper revisits the basic principles of CNT and presents two additional theories that enhance our understanding of crystal nucleation. The dependence of the Gibbs' thermodynamic potential on crystal size is explored, and practical applications in atmospheric and food science are discussed.

PROGRESS IN CRYSTAL GROWTH AND CHARACTERIZATION OF MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Rear earth (Re: Sc, Y, and Ce) modified PDCs-SiC ceramics for efficient microwave

Hanjun Wei et al.

Summary: This study investigates the improvement of microwave absorption performance through material micromorphological design. The results show that Re-SiC ceramics prepared using PDCs methods, with the addition of rare earth elements (Sc, Y, Ce), exhibit enhanced microstructural, dielectric, and microwave absorption properties. Specifically, the Sc-SiC ceramics with a well-designed three-dimensional network structure demonstrate superior microwave absorption performance.

MATERIALS CHARACTERIZATION (2022)

添加到收藏夹

Article Materials Science, Ceramics

Growth mode of interfacial products of Csf/Mg-7.6Al composites

Yuan Ma et al.

Summary: Interfacial products play a crucial role in enhancing the interfacial status and forming quality of C-sf/Mg-7.6Al composites. The growth mode and thermodynamic properties of the interfacial products were deeply investigated, revealing that a moderate degree of interfacial reactions can be achieved at a fabrication temperature of around 873K, with the lateral growth rate of Al4C3 being greater than the longitudinal growth rate. The orientation relationships between different phases and crystal axis were also determined, showing coherent interfaces between the interfacial products and alpha-Mg.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Numerical simulation of precipitation kinetics in multicomponent alloys

K. Xu et al.

Summary: A universal numerical model based on particle size distribution method has been developed for simulating precipitation kinetics in multicomponent alloys. The model successfully captures the evolution of precipitate dimensions and composition, as well as the dependence on changes in alloy composition, through comparison with experimental measurements. The incorporation of a more realistic spatial site distribution via Voronoi construction in the model demonstrates the impact on overall precipitation kinetics.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Single source precursor derived SiBCNHf ceramic with enhanced high-temperature microwave absorption and antioxidation

Yan Song et al.

Summary: This paper introduces a single source hyperbranched polyborosilazane precursor containing hafnium, which is pyrolyzed to obtain SiBCNHf ceramic material with high-temperature resistance and antioxidation performance. The SiBCNHf ceramic has good electromagnetic wave absorption properties in high-temperature and harsh environments, and has wide application potential.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of Ni on the structural evolution of polymer-derived SiOC ceramics

Yuhang Zhao et al.

Summary: Polymer derived ceramics (PDCs) technique is an advanced method for preparing high performance ceramics. The addition of nickel in the pyrolysis process promotes the growth of carbon nanotubes and crystallization of carbon and SiC phases.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Review Engineering, Multidisciplinary

A review of three-dimensional graphene-based aerogels: Synthesis, structure and application for microwave absorption

Dandan Zhi et al.

Summary: Graphene aerogels with unique properties have attracted considerable attention, especially in high-performance electromagnetic wave attenuation. The three-dimensional network and incorporation of other lossy materials contribute to the improvement of microwave absorption efficiency. Current research focuses on synthetic strategies, structural characteristics, and multifunctional microwave absorbing materials based on graphene aerogels.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Engineering, Environmental

Ultralight, compressible, and high-temperature-resistant dual-phase SiC/Si3N4 felt for efficient electromagnetic wave attenuation

Xiaolin Lan et al.

Summary: The ingenious multicomponent microstructure design has led to the successful fabrication of a high-performance SiC/Si3N4 composite ceramic felt with excellent absorption efficiency and a wide absorption bandwidth. This material exhibits superior thermal stability and high-temperature resistance, making it suitable for electromagnetic absorbers in extreme high-temperature environments.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Physical

Evaporation-driven 3D CNT scaffolding for composite reinforcement

A. Nissenbaum et al.

Summary: The study explores a novel approach to enhance composites by constructing a dense CNT-network scaffold before impregnating it with a matrix, resulting in a composite with improved strength and potential for diverse nanoscale applications. The 3D CNT scaffold formed on quartz fibers exhibits high density, nanoscale pore size, and a straightforward, efficient process. The strength of the scaffold-reinforced composite is evaluated to be around 200 MPa, demonstrating its promising prospect for composite reinforcement.

CARBON (2021)

添加到收藏夹

Article Materials Science, Ceramics

Cup-stacked carbon nanotubes hybridized Si3N4/Si3N4 composite ceramics for high-effciency microwave absorption with excellent thermal stability

Fang Ye et al.

Summary: The hybridization of carbon nanotubes (CNTs) with Si3N4 to create CSCNT-Si3N4/Si3N4 composite ceramics allows for efficient microwave absorption with a very low filler loading, while also providing protection against oxidation for CNTs. This innovative approach demonstrates strong microwave absorption performance and long-term stability in high-temperature conditions.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Syntheses, microstructure evolution and performance of strength-ductility matched aluminum matrix composites reinforced by nano SiC-cladded CNTs

Lei Liu et al.

Summary: The introduction of a nano SiC layer into the CNTs/Al interface improves structural stability and inhibits the formation of brittle phases in aluminum matrix composites. The dispersed CNTs@SiC reinforcements effectively pin Al matrix grains during sintering at high temperatures, while the nano SiC transition layer enhances wettability and interface bonding between Al and CNTs@SiC. This innovative approach leads to improved strength-ductility matching in CNTs reinforced AMCs, maintaining good electrical conductivity and structural stability of the Al matrix.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Growth mechanism and thermal behavior of electroless Cu plating on short carbon fibers

Yuan Ma et al.

Summary: The deposition of a copper coating on short carbon fibers through electroless plating can effectively protect against mass loss at high temperatures, with the optimal plating time being 3-4 minutes.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review of three-dimensional graphene networks for thermal management and electromagnetic protection

Hui Jia et al.

Summary: 3D graphene networks have attracted great interest due to their ability to avoid agglomeration, improve utilization efficiency, lightweight, high thermal conductivity, and excellent electrical conductivity, making them widely used in thermal management and electromagnetic interference shielding. This review summarizes different preparation strategies, properties, and latest advancements of 3D graphene networks, and outlines the challenges and outlook for the future development of these networks.

NEW CARBON MATERIALS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Enhanced electrical and thermal conductivities of 3D-SiC(rGO, Gx) PDCs based on polycarbosilane-vinyltriethoxysilane-graphene oxide (PCS-VTES-GO) precursor containing graphene fillers

Yuchen Han et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure and electromagnetic wave absorption property of reduced graphene oxide-SiCnw/SiBCN composite ceramics

Chaokun Song et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

The fate and role of in situ formed carbon in polymer-derived ceramics

Qingbo Wen et al.

PROGRESS IN MATERIALS SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

X Band electromagnetic property influence of multi-walled carbon nanotube in hybrid MnZn ferrite and carbonyl iron composites

B. H. K. Lopes et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D carbon network supported porous SiOC ceramics with enhanced microwave absorption properties

Chen Chen et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Formation of laminated nano-coatings for enhanced anti-oxidation and electromagnetic wave absorbing properties of carbon fiber

Aiming Bu et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

The superior mechanical and physical properties of nanocarbon reinforced bulk composites achieved by architecture design - A review

Xiang Zhang et al.

PROGRESS IN MATERIALS SCIENCE (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Synthesis of CNTs on stainless steel microfibrous composite by CVD: Effect of synthesis condition on carbon nanotube growth and structure

Yi Yang et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Chemistry, Physical

Microstructure and dielectric property evolution of self-healing PDC-SiBCN in static air

Chaokun Song et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Selective growth of SiC nanowires in interlaminar matrix for improving in-plane strengths of laminated Carbon/Carbon composites

Qiang Song et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Initial nucleation of amorphous Si-B-C-N ceramics derived from polymer-precursors

Ling-yan Li et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Polymer-Derived Silicon Oxycarbide Ceramics as Promising Next-Generation Sustainable Thermoelectrics

Adhimoolam Bakthavachalam Kousaalya et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Materials Science, Ceramics

Electromagnetic wave absorption properties of nickel-containing polymer derived SiCN ceramics

Yu Liu et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Chemistry, Physical

Microwave absorbing performance of polymer-derived SiCN (Ni) ceramics prepared from different nickel sources

Yu Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure and electromagnetic wave absorption properties of RGO-SiBCN composites via PDC technology

Chaokun Song et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Covalent Functionalization of Multi-Walled Carbon Nanotubes Surface via Chemical Treatment

Myoung-Uk Kim et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2017)

添加到收藏夹

Article Materials Science, Ceramics

In situ growth of one-dimensional nanowires on porous PDC-SiC/Si3N4 ceramics with excellent microwave absorption properties

Wenhu Hong et al.

CERAMICS INTERNATIONAL (2017)

添加到收藏夹

Article Materials Science, Ceramics

Synthesis and microwave absorption properties of SiC nanowires reinforced SiOC ceramic

Wenyan Duan et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

添加到收藏夹

Article Materials Science, Ceramics

Dielectric and microwave absorption properties of polymer derived SiCN ceramics annealed in N2 atmosphere

Quan Li et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Increasing the Tensile Property of Unidirectional Carbon/Carbon Composites by Grafting Carbon Nanotubes onto Carbon Fibers by Electrophoretic Deposition

Qiang Song et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2013)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.