相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。An ultra-strong and ductile crystalline-amorphous nanostructured surface layer on TiZrHfTaNb0.2 high-entropy alloy by laser surface processing
Jiasi Luo et al.
MATERIALS & DESIGN (2023)
Densification, microstructure, and properties of W-Mo-Cu alloys prepared with nano-sized Cu powders via large electric current sintering
Hongling Zhou et al.
ADVANCED POWDER TECHNOLOGY (2022)
Strengthening nanocrystalline immiscible bimetallic composite by high-entropy effect
Jinyang Luo et al.
COMPOSITES PART B-ENGINEERING (2022)
Uncover the mystery of interfacial interactions in immiscible composites by spectroscopic microscopy: A case study with W-Cu
Zhi Zhao et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)
Fabrication and characterization of the Mo/cu bimetal with thick Mo layer and high interfacial strength
Kaiyuan Liu et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2021)
In situ synthesis of core-shell W-Cu nanopowders for fabricating full-densified and fine-grained alloys with dramatically improved performance
Xiaojing Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
The effect of the graded bilayer design on the strain depth profiles and microstructure of Cu/W nano-multilayers
A. Druzhinin et al.
MATERIALS & DESIGN (2021)
Metallic glass instability induced by the continuous dislocation absorption at an amorphous/crystalline interface
Thanh Phan et al.
ACTA MATERIALIA (2020)
MnO2 as an effective sintering aid for difficult-to-sinter LiTaO3 -based ceramics: Densification and dielectric properties
Youfeng Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Sintering behavior of molybdenum-copper and tungsten-copper alloys by using ultrafine molybdenum and tungsten powders as raw materials
He Zhang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2020)
Effect of the distribution state of transition phase on the mechanical properties and failure mechanisms of the W-Mo-Cu alloy by tuning elements content
Jin Cao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Microstructure evolution and deformation mechanism of amorphous/crystalline high-entropy-alloy composites
Jia Li et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Phase evolution of Mo-W-Cu alloy rapid prepared by spark plasma sintering
Sixuan Ke et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
The formation and evolution mechanism of amorphous layer surrounding Nb nano-grains in Nb-Al system during mechanical alloying process
Xinhua Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Enhanced ductility of W-Mo-Cu alloy through the formation of nanometer-to-micrometer-thick dual-phase transition phase layer
Jin Cao et al.
MATERIALS & DESIGN (2019)
Thermal stability of immiscible sputter-deposited Cu-Mo thin films
Imane Souli et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Ab initio study of H, B, C, N, O, and self-interstitial atoms in hcp-Zr
Daegun You et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
A new route for preparing Mo-10wt.%Cu composite compacts
Xin-Peng Ji et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
Engineering atomic-level complexity in high-entropy and complex concentrated alloys
Hyun Seok Oh et al.
NATURE COMMUNICATIONS (2019)
Preparation and controllability of Cu particles on annealed Mo-Cu alloy films
Haoliang Sun et al.
MATERIALS LETTERS (2019)
Alloying effects on the microstructure and mechanical properties of nanocrystalline Cu-based alloyed thin films: Miscible Cu-Ti vs immiscible Cu-Mo
J. Y. Zhang et al.
ACTA MATERIALIA (2018)
Complexions in WC-Co cemented carbides
Xingwei Liu et al.
ACTA MATERIALIA (2018)
Orientation dependent plasticity of metallic amorphous-crystalline interface
Ehsan Alishahi et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Realizing strength-ductility combination of coarse-grained Al0.2Co1.5CrFeNi1.5Ti0.3 alloy via nano-sized, coherent precipitates
Kaisheng Ming et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Microstructural study on the effect of directional infiltration and Ni activator on tensile strength and conductivity of W-10 wt%Cu composite
M. Ahangarkani et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Mutual relationship between material removal rate and W-W interfacial features during ultra-high temperature erosion of infiltrated W-10wt.%Cu composite
M. Ahangarkani et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Selective laser melting of W-Ni-Cu composite powder: Densification, microstructure evolution and nano-crystalline formation
Minbo Wang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Fabrication of homogeneous Mo-Cu composites using spherical molybdenum powders prepared by thermal plasma spheroidization process
Baoqiang Li et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Fabrication and properties of the W-Cu composites reinforced with uncoated and nickel-coated tungsten fibers
Longchao Zhuo et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Building metallurgical bonding interfaces in an immiscible Mo/Cu system by irradiation damage alloying (IDA)
Jinlong Du et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Formation of gradient microstructure and mechanical properties of hot-pressed W-20 wt% Cu composites after sliding friction severe deformation
L. L. Dong et al.
MATERIALS CHARACTERIZATION (2018)
Effects of substrate temperature and deposition rate on the phase separated morphology of co-sputtered, Cu-Mo thin films
B. Derby et al.
THIN SOLID FILMS (2018)
Microstructure and physical properties of sputter-deposited Cu-Mo thin films
Imane Souli et al.
THIN SOLID FILMS (2018)
A nanocrystalline-amorphous mixed layer obtained by ultrasonic shot peening on pure titanium at room temperature
Lihua Zhu et al.
ULTRASONICS SONOCHEMISTRY (2018)
Amorphous martensite in β-Ti alloys
Long Zhang et al.
NATURE COMMUNICATIONS (2018)
Suppression of shear banding in high-strength Cu/Mo nanocomposites with hierarchical bicontinuous intertwined structures
Yuchi Cui et al.
MATERIALS RESEARCH LETTERS (2018)
Effect of Sintering Temperature of Mo Skeleton on the Contiguity and Compressive Properties of Mo-Cu IPCs
Longfei Liu et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Microstructure characterization of W-Cu alloy sheets produced by high temperature and high pressure deformation technique
Wenge Chen et al.
MATERIALS LETTERS (2017)
Liquid phase sintering of mechanically alloyed Mo-Cu powders
Paola A. Benavides et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Synthesis and thermal conductivity improvement of W-Cu composites modified with WC interfacial layer
Chengcheng Zhang et al.
MATERIALS & DESIGN (2017)
Microstructure, mechanical properties and energetic characteristics of a novel high-entropy alloy HfZrTiTa0.53
Zhouran Zhang et al.
MATERIALS & DESIGN (2017)
Molecular dynamics study of deformation behavior of crystalline Cu/amorphous Cu50Zr50 nanolaminates
H. Y. Song et al.
MATERIALS & DESIGN (2017)
Materials selection rules for amorphous complexion formation in binary metallic alloys
Jennifer D. Schuler et al.
ACTA MATERIALIA (2017)
Coercivities of hot-deformed magnets processed from amorphous and nanocrystalline precursors
Xin Tang et al.
ACTA MATERIALIA (2017)
Thermal stability of Cu/W nano-multilayers
F. Moszner et al.
ACTA MATERIALIA (2016)
Preparation of W-Cu alloy with high density and ultrafine grains by mechanical alloying and high pressure sintering
W. T. Qiu et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2016)
Manipulating the interfacial structure of nanomaterials to achieve a unique combination of strength and ductility
Amirhossein Khalajhedayati et al.
NATURE COMMUNICATIONS (2016)
Elastic and transport properties of nanolayered crystalline Cu/amorphous Cu-Zr multilayers
C. He et al.
MATERIALS & DESIGN (2016)
From solid solutions to fully phase separated interpenetrating networks in sputter deposited immiscible W-Cu thin films
F. T. N. Vuellers et al.
ACTA MATERIALIA (2015)
Amorphous intergranular films as toughening structural features
Zhiliang Pan et al.
ACTA MATERIALIA (2015)
Interface of Mo-Cu laminated composites by solid-state bonding
Dezhi Wang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2015)
Activated liquid phase sintering of W-Cu and Mo-Cu
John L. Johnson
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2015)
Deviation from high-entropy configurations in the atomic distributions of a multi-principal-element alloy
Louis J. Santodonato et al.
NATURE COMMUNICATIONS (2015)
Temperature dependent tensile and fracture behaviors of Mo-10 wt.% Cu composite
F. Fang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)
Fabrication of Mo-Cu composites by a diffusion-rolling procedure
Yihang Yang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)
Nucleation of shear bands in amorphous alloys
John H. Perepezko et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2014)
Structure and shear deformation of metallic crystalline-amorphous interfaces
C. Brandl et al.
ACTA MATERIALIA (2013)
Miedema model based methodology to predict amorphous-forming-composition range in binary and ternary systems
N. Das et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Thermal and mechanical properties of infiltrated W/CuCrZr composite materials for functionally graded heat sink application
J. -H. You et al.
JOURNAL OF NUCLEAR MATERIALS (2013)
Synthesis and characterization of MoSi2-Mo5Si3 nanocomposite by mechanical alloying and heat treatment
Shahrouz Zamani et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2012)
Synthesis and kinetic study of (Mo,W)Si2-WSi2 nanocomposite by mechanical alloying
Shahrouz Zamani et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Microstructure and bonding strength of diffusion welding of Mo/Cu joints with Ni interlayer
Jian Zhang et al.
MATERIALS & DESIGN (2012)
Thermodynamic analysis of nanocrystalline and amorphous phase formation in Nb-Al system during mechanical alloying
H. Mostaan et al.
POWDER METALLURGY (2012)
Nonequilibrium alloy formation in the immiscible Cu-Mo system studied by thermodynamic calculation and ion beam mixing
X. Bai et al.
JOURNAL OF APPLIED PHYSICS (2010)
Effect of Fe on the sintering and thermal properties of Mo-Cu composites
Xian-liang Zhou et al.
MATERIALS & DESIGN (2010)
Mutual dependency of mechanical properties and contiguity in W-Cu composites
M. Amirjan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Preparation and characterization of Mo-15 Cu superfine powders by a gelatification-reduction process
Peng Song et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Interface thermodynamics of nano-sized crystalline, amorphous and liquid metallic systems
F. Sommer et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Production of TiNi amorphous/nanocrystalline wires with high strength and elastic modulus by severe cold drawing
Koichi Tsuchiya et al.
SCRIPTA MATERIALIA (2009)
Study on the solid solubility extension of Mo in Cu by mechanical alloying Cu with amorphous Cr(Mo)
Shengqi Xi et al.
ACTA MATERIALIA (2008)
Mechanical alloying of Cu-Mo powder mixtures and thermodynamic study of solubility
V. de P. Martinez et al.
MATERIALS LETTERS (2007)
The dependence of the contiguity of WC on Co content and its independence from WC grain size in WC-Co alloys
S Luyckx et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2006)
Consolidation of partially amorphous aluminium-alloy powders by severe plastic deformation
WJ Botta et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
分享论文
