☆ 4.7 Article

Quality assessment of 3D-printed cereal-based products

LWT-FOOD SCIENCE AND TECHNOLOGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Powder properties, rheology and 3D printing quality of gluten-free blends

Kristina Rados et al.

Summary: Food personalization and customization is now easier with the help of 3D printing. This research explores the suitability of four gluten-free powder blends for 3D printing and successfully prints blends with similar chemical composition but different botanical origin.

JOURNAL OF FOOD ENGINEERING (2023)

添加到收藏夹

Article Chemistry, Applied

Relation between deformation and relaxation of hydrocolloids-starch based bio-inks and 3D printing accuracy

Martin Philipp Heckl et al.

Summary: For the quality control of starch-based food for 3D food printing, it is important to understand the rheological behavior of the inks during and after printing and their influence on printing accuracy. Mechanical forces during printing strongly affect the pseudoplastic networks of the food inks. By using different hydrocolloids to stabilize the inks, the deformation and relaxation behavior of the materials were investigated, revealing a positive correlation between network strength and printing stability.

FOOD HYDROCOLLOIDS (2023)

添加到收藏夹

Article Biochemistry & Molecular Biology

Investigation of the mechanism of different 3D printing performance of starch and whole flour gels from tuber crops

Shengyang Ji et al.

Summary: This study aims to investigate the differences in 3D printing performance and mechanism between whole flour and starch gels derived from different tuber crops. The whole flour showed higher branching degree and molecular weight, as well as a higher proportion of AM chains for 100 < X <= 1000 compared to starch. This led to improved extrusion and printing accuracy of the whole flour material, due to its higher degree of branching and short-range ordered structure.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2023)

添加到收藏夹

Review Food Science & Technology

Advancements in 3D food printing: a comprehensive overview of properties and opportunities

John Y. Zhang et al.

Summary: 3D printing technology has great potential in the food industry, but there are still challenges to be overcome. Key factors for successfully 3D printing food, such as material properties and printing parameters, need to be understood and controlled in order to achieve the desired quality and functionality.

CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION (2022)

添加到收藏夹

Article Chemistry, Applied

Effect of starch molecular structure on precision and texture properties of 3D printed products

Shengyang Ji et al.

Summary: This study evaluated the influence of starch molecular structure on the precision and textural properties of 3D printed products. The results showed that starch gels with higher content of short amylopectin chains and specific degree of polymerization of amylose chains facilitated the rheological properties and smooth extrusion in the 3D printing process. Additionally, small average molecular size and appropriate proportion of amylose chains related to water distribution in the gel were beneficial to the accuracy of 3D printed products. The proportion of amylopectin and amylose chains had significant negative and positive correlations with the hardness and resilience of the 3D printed products, respectively.

FOOD HYDROCOLLOIDS (2022)

添加到收藏夹

Article Food Science & Technology

Bioprocessing of Wheat and Amaranth Bran for the Reduction of Fructan Levels and Application in 3D-Printed Snacks

Matea Habus et al.

Summary: This study investigates the degradation of fructans in wheat and amaranth bran through bioprocessing and the application of the processed bran in 3D-printed snacks. The research finds that bioprocessing can significantly reduce fructan content, improve dough rheology and snack printing precision, and reduce shrinkage and hardness. The study concludes that snacks can be enriched with fiber and low in fructans using bioprocessed wheat or amaranth bran and 3D printing technology.

FOODS (2022)

添加到收藏夹

Review Food Science & Technology

3D Food Printing Applications Related to Dysphagia: A Narrative Review

Tim Lorenz et al.

Summary: Dysphagia is a swallowing condition commonly caused by stroke, predominantly affecting the elderly. Texture-modified diets are often prescribed but can lead to malnutrition. 3D food printing shows potential to enhance the appeal of texture-modified diets, although its ultra-processed nature raises concerns about nutrition and the gut microbiome.

FOODS (2022)

添加到收藏夹

Article Chemistry, Applied

Rheology of edible food inks from 2D/3D/4D printing, and its role in future 5D/6D printing

Yang Cheng et al.

Summary: Food printing is an innovative food production technology that uses printable biopolymers to create edible inks. Rheology is important in evaluating the printability and effectiveness of the inks, and lays the foundation for design and development of food ink printing. This review discusses the rheological principles of edible inks and summarizes recent advances in their application in food decoration, customization, and intelligence.

FOOD HYDROCOLLOIDS (2022)

添加到收藏夹

Article Food Science & Technology

Effect of oil content and enzymatic treatment on dough rheology and physical properties of 3D-printed cereal snack

Matea Habus et al.

Summary: This work investigated the influence of oil content, xylanase activity, and resting time of the dough on its rheology, 3D printing precision, and snack quality. The study found that the rheological properties of the dough can be valuable predictors of shrinkage and color of 3D-printed snacks, facilitating product development.

JOURNAL OF CEREAL SCIENCE (2022)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Printability evaluation of Chlorella vulgaris snacks

S. Oliveira et al.

Summary: The aim of this study was to evaluate the influence of Chlorella vulgaris additions on the printability of cereal-based doughs. The results showed that lower levels of C. vulgaris incorporation led to doughs with lower texture and rheology properties, resulting in more accurate printed structures. Additionally, increasing additions of C. vulgaris produced darker doughs, while lower levels of incorporation improved the overall appreciation of the snack. Furthermore, subtle sensory attributes had a positive impact on overall appreciation.

ALGAL RESEARCH-BIOMASS BIOFUELS AND BIOPRODUCTS (2022)

添加到收藏夹

Article Engineering, Manufacturing

Evaluation of rheology and printability of 3D printing nutritious food with complex formulations

Ruben Maldonado-Rosas et al.

Summary: Understanding the rheological properties and printability of complex food formulations is crucial for 3D printing. This study reports on nutritious food formulations with multiple ingredients, including by-products and sustainable proteins. The concentration of pregelatinized corn starch and printing temperature were varied, and the rheological properties and printability were evaluated. The results showed that the concentration of pregelatinized starch had an impact on the rheological properties, but high values did not necessarily result in improved printability.

ADDITIVE MANUFACTURING (2022)

添加到收藏夹

Article Engineering, Chemical

Programmable texture properties of cereal-based snack mediated by 3D printing technology

A. Derossi et al.

Summary: The study showed that 3D food printing can create personalized food structures by controlling the pores, resulting in snacks with different textures. The printed snacks exhibited changes in porosity fraction, hardness, and relative density compared to the virtual model, demonstrating potential for creating novel foods with desired texture.

JOURNAL OF FOOD ENGINEERING (2021)

添加到收藏夹

Article Food Science & Technology

Influence of Flour Type, Dough Acidity, Printing Temperature and Bran Pre-processing on Browning and 3D Printing Performance of Snacks

Matea Habus et al.

Summary: The study investigated the physical properties of 3D-printed snacks enriched with wheat bran, exploring factors such as flour type, addition of acidity regulators, printing temperature, and bran pre-processing. It was found that proper processing techniques can reduce browning of the dough and improve printing precision.

FOOD AND BIOPROCESS TECHNOLOGY (2021)

添加到收藏夹

Article Food Science & Technology

Predicting the extrudability of complex food materials during 3D printing based on image analysis and gray-box data-driven modelling

Yizhou Ma et al.

Summary: This study utilizes image analysis and model prediction to enhance the accuracy and efficiency of extrusion-based food printing by quantifying and predicting extrudability of complex food materials.

INNOVATIVE FOOD SCIENCE & EMERGING TECHNOLOGIES (2021)

添加到收藏夹

Article Engineering, Chemical

Structuring wheat dough using a thermomechanical process, from liquid food to 3D-printable food material

Laurena Masbernat et al.

Summary: The printability of food materials in extrusion printing is influenced by the rheology of the food under shearing and at rest post-deposition. The study on wheat-flour based materials revealed that the water/flour ratio played a crucial role in the structure and printability of the materials. Materials obtained by heating and shearing doughs with a moisture content above 55% (wb) were suitable for 3D extrusion printing and could form stable objects.

JOURNAL OF FOOD ENGINEERING (2021)

添加到收藏夹

Article Food Science & Technology

Influence of Flour and Fat Type on Dough Rheology and Technological Characteristics of 3D-Printed Cookies

Tomislava Vukusic Pavicic et al.

Summary: This study highlights the significance of selecting fat and flour types on the quality and repeatability of 3D-printed cookies. The results showed that cookies with olive oil had lower baking loss and better printing quality compared to those with butter, which was attributed to the higher viscosity and consistency coefficient of the dough. The study also demonstrated that cookies with a mixture of oat, rye, and carob flour printed with high accuracy, close to the ideal 3D shape, emphasizing the importance of flour choice in achieving desired printing outcomes.

FOODS (2021)

添加到收藏夹

Article Engineering, Chemical

Assessment of a novel window of dimensional stability for screening food inks for 3D printing

Justin J. Nijdam et al.

Summary: The study evaluated the dimensional stability window of food inks for 3D food printing based on rheological measurements of their rigidities, providing guidance on likely stability of 3D-printed food items. The screening method shows promise for accelerating the development of 3D-printing food inks by narrowing down potential candidates before printing tests begin. No correlation was found between rheological properties and filament quality of the food inks, as hardening times for molten ink filaments varied significantly.

JOURNAL OF FOOD ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Applied

Improvement of 3D printability of buckwheat starch-pectin system via synergistic Ca2+-microwave pretreatment

Chaofan Guo et al.

Summary: The synergistic treatment of calcium chloride and microwave heating was found to improve the rheological properties and printability of a buckwheat starch-high-methoxy pectin gel system. Microwave heating reduced the viscosity of the gel, while synergistic treatment enhanced the plasticity of the gel. The cross-linkage between Ca2+ and amide group within the gel caused aggregation and lowered the viscosity, leading to improved printing precision compared to steam treatment.

FOOD HYDROCOLLOIDS (2021)

添加到收藏夹

Article Food Science & Technology

Post-processing and printability evaluation of red ginseng snacks for three-dimensional (3D) printing

Gyu Han Jo et al.

Summary: The study investigated the impact of different types of starch matrix and post-processing conditions on the physical properties of 3D printed functional snacks. Results showed that high amylose potato starch exhibited the highest shear modulus and the best printing performance, while 10% potato starch provided optimal dimensional stability and printing resolution. The research suggested that freeze-drying as a post-processing technique could be a promising tool for modifying the texture of 3D printed food.

FOOD BIOSCIENCE (2021)

添加到收藏夹

Article Food Science & Technology

Impact of 3D printing and post-processing parameters on shape, texture and microstructure of carrot appetizer cake

Valerie Guenard-Lampron et al.

Summary: 3D food printing aims to provide consumers with the ability to customize food texture and composition, with this study focusing on the impact of printing and post-processing parameters on the texture of 3D-printed foods. A predictive model based on nozzle diameter, filling rate, baking time, and temperature was established, allowing for a reverse-engineering approach to achieve desired texture by adjusting these parameters. Experimental design and desirability function were used to develop printed cakes with specific textural and microstructural characteristics desired by consumers.

INNOVATIVE FOOD SCIENCE & EMERGING TECHNOLOGIES (2021)

添加到收藏夹

Article Food Science & Technology

Valorization of food industry waste and by-products using 3D printing: A study on the development of value-added functional cookies

Bhagya Jagadiswaran et al.

Summary: Research focuses on utilizing waste from the food industry to develop a 3D printing material for functional cookies, enhancing their nutritional and antioxidant properties. The resulting product with high consumer preference showcases the potential of customization and cleaner production practices through additive manufacturing.

FUTURE FOODS (2021)

添加到收藏夹

Proceedings Paper Computer Science, Artificial Intelligence

A Machine Vision Based Automated Quality Control System for Product Dimensional Analysis

Aditya Akundi et al.

Summary: Quality control in manufacturing processes is crucial for ensuring products meet consumer expectations. Machine vision systems are increasingly used for their accuracy and cost-effectiveness in quality control. The proposed system in this paper utilizes noncontact inspection and algorithm analysis to accurately determine product dimensions for defect detection.

BIG DATA, IOT, AND AI FOR A SMARTER FUTURE (2021)

添加到收藏夹

Article Food Science & Technology

Applicability of Rice Doughs as Promising Food Materials in Extrusion-Based 3D Printing

Yuntao Liu et al.

FOOD AND BIOPROCESS TECHNOLOGY (2020)

添加到收藏夹

Article Food Science & Technology

Factors affecting 3D printing and post-processing capacity of cookie dough

Ezgi Pulatsu et al.

INNOVATIVE FOOD SCIENCE & EMERGING TECHNOLOGIES (2020)

添加到收藏夹

Article Food Science & Technology

3D Extrusion Printability of Rice Starch and Optimization of Process Variables

Radhika Theagarajan et al.

FOOD AND BIOPROCESS TECHNOLOGY (2020)

添加到收藏夹

Article Food Science & Technology

3D printability of brown rice gel modified by some food hydrocolloids

Meng-sha Huang et al.

JOURNAL OF FOOD PROCESSING AND PRESERVATION (2020)

添加到收藏夹

Article Food Science & Technology

3D printing and additive manufacturing of cereal-based materials: Quality analysis of starch-based systems using a camera-based morphological approach

Ahmed Raouf Fahmy et al.

INNOVATIVE FOOD SCIENCE & EMERGING TECHNOLOGIES (2020)

添加到收藏夹

Article Food Science & Technology

Influence of Selected Product and Process Parameters on Microstructure, Rheological, and Textural Properties of 3D Printed Cookies

Cinu Varghese et al.

FOODS (2020)

添加到收藏夹

Article Engineering, Chemical

Extending the 3D food printing tests at high speed. Material deposition and effect of non-printing movements on the final quality of printed structures

A. Derossi et al.

JOURNAL OF FOOD ENGINEERING (2020)

添加到收藏夹

Article Food Science & Technology

Printability and Physicochemical Properties of Microalgae-Enriched 3D-Printed Snacks

Zaida Natalia Uribe-Wandurraga et al.

FOOD AND BIOPROCESS TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Applied

3D printed functional cookies fortified with Arthrospira platensis: Evaluation of its antioxidant potential and physical-chemical characterization

Marta V. Vieira et al.

FOOD HYDROCOLLOIDS (2020)

添加到收藏夹

Article Food Science & Technology

Analyzing the effects of 3D printing process per se on the microstructure and mechanical properties of cereal food products

A. Derossi et al.

INNOVATIVE FOOD SCIENCE & EMERGING TECHNOLOGIES (2020)

添加到收藏夹

Article Food Science & Technology

Structural and Textural Characteristics of 3D-Printed Protein- and Dietary Fibre-Rich Snacks Made of Milk Powder and Wholegrain Rye Flour

Martina Lille et al.

FOODS (2020)

添加到收藏夹

Article Engineering, Chemical

Development of fiber-enriched 3D printed snacks from alternative foods: A study on button mushroom

K. Keerthana et al.

JOURNAL OF FOOD ENGINEERING (2020)

添加到收藏夹

Article Engineering, Chemical

3D extrusion-based printability evaluation of selected cereal grains by computational fluid dynamic simulation

Chaofan Guo et al.

JOURNAL OF FOOD ENGINEERING (2020)

添加到收藏夹

Review Engineering, Biomedical

Assessment methodologies for extrusion-based bioink printability

Gregory Gillispie et al.

BIOFABRICATION (2020)

添加到收藏夹

Article Chemistry, Applied

Linking rheology and printability of a multicomponent gel system of carrageenan-xanthan-starch in extrusion based additive manufacturing

Zhenbin Liu et al.

FOOD HYDROCOLLOIDS (2019)

添加到收藏夹

Article Food Science & Technology

Effect of hydrocolloid addition on dimensional stability in post-processing of 3D printable cookie dough

Hyun Woo Kim et al.

LWT-FOOD SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Food Science & Technology

Assessing the 3D Printing Precision and Texture Properties of Brown Rice Induced by Infill Levels and Printing Variables

Meng-sha Huang et al.

FOOD AND BIOPROCESS TECHNOLOGY (2019)

添加到收藏夹

Article Food Science & Technology

3D Extrusion Printing and Post-Processing of Fibre-Rich Snack from Indigenous Composite Flour

Prithvika Krishnaraj et al.

FOOD AND BIOPROCESS TECHNOLOGY (2019)

添加到收藏夹

Article Food Science & Technology

On printability, quality and nutritional properties of 3D printed cereal based snacks enriched with edible insects

C. Severini et al.

FOOD RESEARCH INTERNATIONAL (2018)

添加到收藏夹

Article Engineering, Chemical

Application of 3D printing for customized food. A case on the development of a fruit-based snack for children

A. Derossi et al.

JOURNAL OF FOOD ENGINEERING (2018)

添加到收藏夹

Article Engineering, Chemical

Applicability of protein and fiber-rich food materials in extrusion-based 3D printing

Martina Lille et al.

JOURNAL OF FOOD ENGINEERING (2018)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.