☆ 4.6 Article

Dynamic analysis of a dual rotor bearing system passing through critical speed

JOURNAL OF VIBRATION AND CONTROL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Acoustics

Nonlinear modeling of a misaligned rotor under non-stationary operating conditions

Mohammad Rokn-Abadi et al.

Summary: A novel model is developed to investigate the angular acceleration of a nonlinear misaligned rotor passing through critical speeds under non-stationary operating conditions. The rotor is modeled as elastic with nonlinear inertia terms and a flexible bearing. Nonlinear equations of motion are derived and solved using the Lagrange method and finite element method. The effects of parameters such as shaft eccentricity, damping, and stiffness of the supports on the rotor's increase in angular speed passing through the critical speed are considered. The results indicate that a small amount of eccentricity prevents exceeding the rotor's elastic critical speed, and improper selection of support parameters may prevent the rotor from even passing its rigid critical speed.

JOURNAL OF VIBRATION AND CONTROL (2023)

添加到收藏夹

Article Engineering, Mechanical

Dynamic modeling and vibration analysis of a flexible gear transmission system

Jing Liu et al.

Summary: Vibrations are a key issue in gear transmission systems (GTSs) in the machinery industry. Previous vibration analyses treated the rotor as a rigid part, which failed to address the differences in rotor vibrations at different axial positions. To tackle this problem, a flexible-shaft gear-transmission system dynamic (FGDS) model is established using the finite element method. This model takes into account factors such as bearing stiffness, bearing contact force, time-varying meshing stiffness, and damping force. By comparing and analyzing the time and frequency domain vibrations of the FGDS and a rigid-shaft gear-transmission dynamic system (RGDS) model at different rotational speeds, it is found that the FGDS can obtain more accurate results and produces lower vibrations compared to the RGDS model. This study provides a new approach for dynamic modeling and vibration analysis of flexible GTSs.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

添加到收藏夹

Article Mechanics

Nonlinear responses of unbalanced flexible rotating shaft passing through critical speeds

Sadegh Amirzadegan et al.

Summary: This work investigates the nonlinear oscillations of an elastic rotating shaft with acceleration passing through critical speeds, using a mathematical model with Von-Karman higher-order deformations in bending. The study finds that the magnitude and position of mass unbalance significantly affect the dynamic behavior of the rotor system, and applied torque greatly influences dynamic responses leading to passing through critical speeds.

MECCANICA (2022)

添加到收藏夹

Article Engineering, Mechanical

An Unconventional Method for the Diagnosis and Study of Generator Rotor Thermal Bows

Steven Chatterton et al.

Summary: Rotor thermal sensitivity affects the dynamic behavior of power unit generators and diagnostic techniques are useful for identifying actual faults to optimize maintenance activities.

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2022)

添加到收藏夹

Article Acoustics

Dynamic modeling and simulation of a flexible-rotor ball bearing system

Jing Liu et al.

Summary: This paper proposes a comprehensive numerical dynamic model of a flexible-rotor bearing system based on nonlinear contact force methods, analyzing the influences on system displacements and spectrums. Results show that differences in frequency-amplitude characteristics between flexible and rigid rotor bearing systems are small at low speeds but significant at high speeds.

JOURNAL OF VIBRATION AND CONTROL (2022)

添加到收藏夹

Article Engineering, Mechanical

Tilting Pad Journal Bearing Misalignment Effect on Thermally Induced Synchronous Instability (Morton Effect)

Dongil Shin et al.

Summary: This study investigates the influence of misaligned journal bearing on thermally induced rotor instability, using a three-dimensional finite element model for simulations. Results indicate that the amplitude of misalignment angle affects the instability speed range.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2021)

添加到收藏夹

Article Engineering, Mechanical

Squeeze Film Damper Suppression of Thermal Bow-Morton Effect Instability

Dongil Shin et al.

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2020)

添加到收藏夹

Article Computer Science, Information Systems

Prediction of the thermal bow of rotor based on the measured displacement and temperature

He Peng et al.

INTERNATIONAL JOURNAL OF DISTRIBUTED SENSOR NETWORKS (2020)

添加到收藏夹

Article Acoustics

Investigation on the transient response of a speed-varying rotor with sudden unbalance and its application in the unbalance identification

Yebao Xia et al.

JOURNAL OF LOW FREQUENCY NOISE VIBRATION AND ACTIVE CONTROL (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Nonlinear dynamic analysis of a complex dual rotor-bearing system based on a novel model reduction method

Yulin Jin et al.

APPLIED MATHEMATICAL MODELLING (2019)

添加到收藏夹

Article Engineering, Mechanical

Dynamic performance of a rotor system with an initial bow and coupling faults of imbalance-rub during whirling motion

Yang Yang et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Mechanical

A new computational method for predicting the thermal bow of a rotor

M. Zhuo et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2019)

添加到收藏夹

Article Acoustics

Effect of Unbalance Force Vector Orientation on the Whirl Response of Cracked Rotors

Mohammad A. AL-Shudeifat et al.

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2019)

添加到收藏夹

Article Acoustics

Vibration analysis of a multi-fault transient rotor passing through sub-critical resonances

Heba H. El-Mongy et al.

JOURNAL OF VIBRATION AND CONTROL (2018)

添加到收藏夹

Article Acoustics

Numerical results of the influence of thermal effects on the turbo machine rotordynamics induced by light-rubs against a brush seal

R. Fay et al.

JOURNAL OF SOUND AND VIBRATION (2018)

添加到收藏夹

Article Engineering, Mechanical

Tilting pad gas bearing induced thermal bow- rotor instability (Morton effect)

Xiaomeng Tong et al.

TRIBOLOGY INTERNATIONAL (2018)

添加到收藏夹

Article Engineering, Mechanical

Finite element analysis for a functionally graded rotating shaft with multiple breathing cracks

Debabrata Gayen et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)

添加到收藏夹

Article Acoustics

Dynamic modeling for rigid rotor bearing systems with a localized defect considering additional deformations at the sharp edges

Jing Liu et al.

JOURNAL OF SOUND AND VIBRATION (2017)

添加到收藏夹

Article Mechanics

Dynamic analysis of rotor-bearing system by considering the transverse crack on rotor

N. Upadhyay et al.

EUROPEAN JOURNAL OF COMPUTATIONAL MECHANICS (2017)

添加到收藏夹

Article Engineering, Mechanical

A comprehensive dynamic model to investigate the stability problems of the rotor-bearing system due to multiple excitations

Xuening Zhang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)

添加到收藏夹

Article Engineering, Mechanical

Fault detection in rotor bearing systems using time frequency techniques

N. Harish Chandra et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)

添加到收藏夹

Article Thermodynamics

Effect of shaft manufacturing bending deviation on dynamic response of geared rotor system

Dong Guo et al.

ADVANCES IN MECHANICAL ENGINEERING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Investigation of the dynamic characteristics of a dual rotor system and its start-up simulation based on finite element method

Zhong-xiu Fei et al.

JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A (2013)

添加到收藏夹

Article Acoustics

New breathing functions for the transverse breathing crack of the cracked rotor system: Approach for critical and subcritical harmonic analysis

Mohammad A. Al-Shudeifat et al.

JOURNAL OF SOUND AND VIBRATION (2011)

添加到收藏夹

Article Engineering, Mechanical

A computational investigation on the reducing lateral vibration of rotors with rolling-element bearings passing through critical speeds by means of tuning the stiffness of the system supports

Jaroslav Zapomel et al.

MECHANISM AND MACHINE THEORY (2011)

添加到收藏夹

Article Engineering, Mechanical

Hilbert-Huang transform for detection and monitoring of crack in a transient rotor

T. Ramesh Babu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2008)

添加到收藏夹

Article Acoustics

Dynamics of a bowed rotor with a transverse surface crack

A. K. Darpe et al.

JOURNAL OF SOUND AND VIBRATION (2006)

添加到收藏夹

Article Acoustics

Numerical and experimental investigations on flexible multi-bearing rotor dynamics

Q Ding et al.

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2005)

添加到收藏夹

Article Engineering, Aerospace

Rotor-bearing analysis for turbomachinery single- and dual-rotor systems

HWD Chiang et al.

JOURNAL OF PROPULSION AND POWER (2004)

添加到收藏夹

Article Engineering, Mechanical

Reducing lateral vibration of a rotor passing through critical speeds by phase modulating

SM Wang et al.

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2003)

添加到收藏夹

Article Engineering, Mechanical

Transient lateral analysis of a slant-cracked rotor passing through its flexural critical speed

S Prabhakar et al.

MECHANISM AND MACHINE THEORY (2002)

添加到收藏夹

Article Engineering, Mechanical

Vibration analysis of a misaligned rotor-coupling-bearing system passing through the critical speed

S Prabhakar et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.