相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Influence of microstructure on fatigue crack propagation behaviors of Al-xCu-1.5Li-X alloys
Ding-ding Lu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2023)
Changes in the microstructure and mechanical properties of Ti-6Al-4V alloys induced by Fe ion irradiation at a high He generation rate
Peng Jin et al.
VACUUM (2023)
Adaptive finite element modeling of phase-field fracture driven by hydrogen embrittlement
Moirangthem Dinachandra et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2022)
Microstructure modification of additive manufactured Ti-6Al-4V plates for improved ballistic performance properties
Edward W. Lui et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)
On the interplay of elastic anisotropy and fracture toughness anisotropy in fracture of single and multiphase polycrystals
Hirshikesh Hirshikesh et al.
ENGINEERING FRACTURE MECHANICS (2022)
Insights on low cycle fatigue crack formation and propagation mechanism: A microstructurally-sensitive modeling
Kai Song et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2022)
Second-nearest-neighbor modified embedded-atom method interatomic potential for V-M (M = Cu, Mo, Ti) binary systems
Jaemin Wang et al.
COMPUTATIONAL MATERIALS SCIENCE (2021)
Twin-boundary assisted crack tip plasticity and toughening in lamellar γ-TiAl
Anupam Neogi et al.
ACTA MATERIALIA (2021)
Characterization of Ductile Crack Growth Resistance Behaviour of Interstitial-Free Steel Sheet using Energy Dissipation Rate Parameter
S. K. Chandra et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)
The role of dwell hold on the dislocation mechanisms of fatigue in a near alpha titanium alloy
S. Joseph et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Three-dimensional modeling and simulations of single-crystal and bi-crystal titanium for high-strain-rate loading conditions
B. Feng et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
A threshold density of helium bubbles induces a ductile -to -brittle transition at a grain boundary in nickel
Michael J. Demkowicz
JOURNAL OF NUCLEAR MATERIALS (2020)
Computing critical energy release rates for fracture in atomistic simulations
G. Q. Xu et al.
COMPUTATIONAL MATERIALS SCIENCE (2020)
Toughening alpha-Ti by dislocation-induced phase transformation at crack tips
Hao Zhang et al.
MECHANICS OF MATERIALS (2020)
Atomic simulation of the orientation effects on crack tip behavior in titanium single crystal
Le Chang et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)
Atomistic modeling of fracture
P. Andric et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2019)
Fracture resistance of textured polycrystalline Zr: A simulation study
G. Bertolino et al.
COMPUTATIONAL MATERIALS SCIENCE (2019)
The role of the grain boundary in the fracture toughness of aluminum bicrystal
Wilmer Velilla-Diaz et al.
COMPUTATIONAL MATERIALS SCIENCE (2019)
Atomistic simulations to study crack tip behaviour in single crystal of bcc niobium and hcp zirconium
Divya Singh et al.
CURRENT APPLIED PHYSICS (2019)
Effects of crystalline orientation, twin boundary and stacking fault on the crack-tip behavior of a mode I crack in nanocrystalline titanium
Jun Cai et al.
MECHANICS OF MATERIALS (2019)
Molecular dynamics investigation of c-axis deformation of single crystal Ti under uniaxial stress conditions: Evolution of compression twinning and dislocations
Sunil Rawat et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Evolution of tension twinning in single crystal Ti under compressive uniaxial strain conditions
Sunil Rawat et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Fracture of solar-grade anisotropic polycrystalline Silicon: A combined phase field-cohesive zone model approach
M. Paggi et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)
New theory for crack-tip twinning in fcc metals
Predrag Andric et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)
Molecular dynamics simulation of crack growth in pure titanium under uniaxial tension
Bowen Zhang et al.
MOLECULAR SIMULATION (2018)
Molecular dynamics-based cohesive zone representation of Ti6Al4V/TiC composite interface
Mohamed G. Elkhateeb et al.
MATERIALS & DESIGN (2018)
Molecular dynamics investigation of void evolution dynamics in single crystal iron at extreme strain rates
Sunil Rawat et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Evolution of defects in Ti6-4 under Ti2+ ion irradiation: Focus on radiation-induced precipitates
Sylvie Doriot et al.
JOURNAL OF NUCLEAR MATERIALS (2018)
Martensitic transformation from β′ to α′ and α phases in Ti-V alloys: A first-principles study
Wei Mei et al.
JOURNAL OF MATERIALS RESEARCH (2017)
Observation of dislocations with a Burgers vector containing a ⟨c⟩ component in martensitic hcp ε Fe-17%Mn
Jin-Kyung Kim et al.
SCRIPTA MATERIALIA (2017)
Angular distortive matrices of phase transitions in the fcc-bcc-hcp system
Cyril Cayron
ACTA MATERIALIA (2016)
Failure of metals I: Brittle and ductile fracture
A. Pineau et al.
ACTA MATERIALIA (2016)
Effect of multiaxial loading on evolution of {10(1)over-bar2} twinning in magnesium single crystals
Sunil Rawat et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Illuminating the chemo-mechanics of hydrogen enhanced fatigue crack growth in aluminum alloys
R. J. Zamora et al.
ACTA MATERIALIA (2015)
Atomistic aspects of fracture
Erik Bitzek et al.
INTERNATIONAL JOURNAL OF FRACTURE (2015)
Failure mechanisms in ballistic performance of Ti-6Al-4V targets having equiaxed and lamellar microstructures
Chao Zheng et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2015)
Variant selection and intervariant crystallographic planes distribution in martensite in a Ti-6Al-4V alloy
Hossein Beladi et al.
ACTA MATERIALIA (2014)
Fracture toughness and bond trapping of grain boundary cracks
Johannes J. Moeller et al.
ACTA MATERIALIA (2014)
Voxel based parallel post processor for void nucleation and growth analysis of atomistic simulations of material fracture
H. Hemani et al.
JOURNAL OF MOLECULAR GRAPHICS & MODELLING (2014)
Effects of dynamic mechanical properties on the ballistic performance of a new near-β titanium alloy Ti684
Rongting Li et al.
MATERIALS & DESIGN (2014)
Molecular dynamics simulations of edge cracks in copper and aluminum single crystals
C. B. Cui et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Mechanisms of dislocation multiplication at crack tips
Erik Bitzek et al.
ACTA MATERIALIA (2013)
Ballistic impact behaviour of β-CEZ Ti alloy against 7.62 mm armour piercing projectiles
G. Sukumar et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2013)
Molecular dynamics based study and characterization of deformation mechanisms near a crack in a crystalline material
Jiaxi Zhang et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2013)
Micromechanical modelling of monotonic loading of CP α-Ti: Correlation between macroscopic and microscopic behaviour
N. Benmhenni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
In situ observations of crack arrest and bridging by nanoscale twins in copper thin films
Seong-Woong Kim et al.
ACTA MATERIALIA (2012)
Titanium for Automotive Applications: Challenges and Opportunities in Materials and Processing
Anil K. Sachdev et al.
JOM (2012)
Automated identification and indexing of dislocations in crystal interfaces
Alexander Stukowski et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2012)
Structure identification methods for atomistic simulations of crystalline materials
Alexander Stukowski
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2012)
Automated analysis of twins in hexagonal close-packed metals using molecular dynamics
C. D. Barrett et al.
SCRIPTA MATERIALIA (2012)
3-D observations of short fatigue crack interaction with lamellar and duplex microstructures in a two-phase titanium alloy
S. Birosca et al.
ACTA MATERIALIA (2011)
Suggestions to the cohesive traction-separation law from atomistic simulations
Heiko Krull et al.
ENGINEERING FRACTURE MECHANICS (2011)
Temperature sensitivity of void nucleation and growth parameters for single crystal copper: a molecular dynamics study
S. Rawat et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2011)
Thermodynamically consistent phase-field models of fracture: Variational principles and multi-field FE implementations
C. Miehe et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2010)
Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool
Alexander Stukowski
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2010)
Anisotropy in the plastic flow properties of single-crystal α titanium determined from micro-cantilever beams
Jicheng Gong et al.
ACTA MATERIALIA (2009)
Dislocation motion in magnesium: a study by molecular statics and molecular dynamics
S. Groh et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2009)
Size effects in tearing instability: An analysis based on energy dissipation rate
J. D. G. Sumpter
ENGINEERING FRACTURE MECHANICS (2007)
Crack interaction with microstructure
Sharvan Kumar et al.
MATERIALS TODAY (2007)
In situ TEM study of the effect of M/A films at grain boundaries on crack propagation in an ultra-fine acicular ferrite pipeline steel
Y Zhong et al.
ACTA MATERIALIA (2006)
Energy dissipation rate analysis of a low upper shelf data set
JDG Sumpter
ENGINEERING FRACTURE MECHANICS (2004)
Effect of self-accommodation on α/α boundary populations in pure titanium
SC Wang et al.
ACTA MATERIALIA (2003)
Brittle fracture in polycrystalline microstructures with the extended finite element method
N Sukumar et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2003)
Colony boundary resistance to crack propagation in lamellar Ti-46Al
P Wang et al.
ACTA MATERIALIA (2003)
Cleavage cracking resistance of high angle grain boundaries in Fe-3%Si alloy
Y Qiao et al.
MECHANICS OF MATERIALS (2003)
A total dissipated energy theory of fatigue crack growth in ductile solids
NW Klingbeil
INTERNATIONAL JOURNAL OF FATIGUE (2003)
Use of high temperature X-ray diffractometry to study phase transitions and thermal expansion properties in Ti-6AI-4V
R Pederson et al.
MATERIALS SCIENCE AND TECHNOLOGY (2003)
Cleavage crack-growth-resistance of grain boundaries in polycrystalline Fe-2%Si alloy: experiments and modeling
Y Qiao et al.
MECHANICS OF MATERIALS (2003)
A crystallographic mechanism for fatigue crack propagation through grain boundaries
T Zhai et al.
ACTA MATERIALIA (2000)
The separation of the fracture energy in metallic materials
J Stampfl et al.
INTERNATIONAL JOURNAL OF FRACTURE (2000)
分享论文
