☆ 4.7 Article

Porous spheres enabling excellent high-temperature abradability and long lifetime for abradable seal coating

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Coatings & Films

Numerical Prediction of the Influence of Rub-Induced Thermal Stress on the Abradability of CuAl-Polyester Sealing Coating

Wei Sun et al.

Summary: In this paper, the relationship between rub-induced thermal stress and the abradability of CuAl seal coating was studied using a thermal-mechanical coupling finite element method. The results showed that the contact friction coefficient and incursion conditions had a significant influence on the rub-induced thermal stress. The abradability of the coating increased with the decrease in coating feed speed, and the release of thermal stress and reduction of hardness were identified as the main reasons for maintaining good abradability.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2023)

添加到收藏夹

Article Materials Science, Ceramics

High temperature abradable sealing coating for SiCf/SiC ceramic matrix composites

Jingqi Huang et al.

Summary: The study focuses on the compatibility of intermediate layers for the plasma-sprayed porous YSZ abradable sealing coating (ASC) on SiCf/SiC ceramic matrix composites (CMC). Through isothermal exposure and thermal shock tests at 1200 degrees C, the YSZ topcoat experienced decomposition, formation of mud-cracks and thermally grown oxide, along with the reaction layer of Yb2Si2O7. The coated samples exhibited a bond strength of 5.47 +/- 0.85 MPa and showed excellent high temperature hardness stability with a minimal increase in Superficial Rockwell Hardness (HR15Y) after 1200 degrees C isothermal exposure. The abradability of the ASC was influenced by the hardness and thermal conductivity of the encountered balls.

CERAMICS INTERNATIONAL (2023)

添加到收藏夹

Article Materials Science, Ceramics

Failure mechanisms of (Gd0.9Yb0.1)2Zr2O7/Yb2SiO5/Si thermal/environmental barrier coatings during thermal exposure at 1300 °C/1400 °C

Wenbo Chen et al.

Summary: A novel tri-layer thermal and environmental barrier coatings were proposed for SiC-based ceramic matrix composites. The study revealed the oxidation behavior and failure mechanisms of the coatings at high temperatures, suggesting that defects like mud-cracks, cavities, and TGO channel cracks could cause delaminating failure at the interface.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Materials Science, Coatings & Films

Enhanced High-Temperature YSZ-polyester Abradable Honeycomb Seal Structures

P. Pathak et al.

Summary: This study proposes a concept to improve the temperature capability and reliability of high-temperature abradable seal structures by forming a thermal shock resistance structure. The feasibility of this concept is validated by coating a honeycomb seal structure with high-temperature material and evaluating its microstructure and thermo-mechanical performance.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Excellently abradable seal coating with spherical closed-pore for next-generation aero-engine application

Yun-Qi Tong et al.

Summary: The new abradable seal coating with a spherical closed-pore structure has both lower hardness and higher bonding strength compared to conventional coatings. It showed excellent abradability in high-speed scraping test, promising to improve the efficiency and reliability of the next generation aero-engine.

MATERIALS LETTERS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Self-lubricating epoxy-based composite abradable seal coating eliminating adhesive transfer via hierarchical design

Yun-Qi Tong et al.

Summary: This paper presents a novel epoxy-based composite abradable seal coating that eliminates adhesive transfer by changing the scraping pair from metal-to-metal to metal-to-polymer. The coating exhibits self-lubricating properties and thermal conductivity, preventing adhesive transfer during metal blade scraping.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mesoscale Simulation and Evaluation of the Mechanical Properties of Ceramic Seal Coatings

Xuying Cheng et al.

Summary: This study investigated the microstructure feature extraction and performance simulations of a Yttria-Stabilized Zirconia (YSZ) abradable coating used in high-pressure turbines of aero-engines with a service temperature over 1000 degrees C. The effects of porosity and pore diameter on the properties of the coating were determined, and an evaluation function using the normalized weighting strategy was proposed to characterize the comprehensive properties of the coating. The optimal abradability, bonding strength, and thermal shock resistance of the coating were obtained under a combination of 25% porosity and 1 μm pore diameter.

COATINGS (2022)

添加到收藏夹

Article Materials Science, Coatings & Films

Preparation and Characterization of Self-Lubricating CaF2@ZrO2/YSZ Composite Coating

Xian Zeng et al.

Summary: Core-shell CaF2@ZrO2 powders were prepared to protect CaF2 during the deposition of YSZ-based abradable seal coating. The results showed that the core-shell powders effectively protected CaF2 and reduced the wear rate.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Lightweight epoxy-based abradable seal coating with high bonding strength

Yun-Qi Tong et al.

Summary: A new lightweight epoxy-based abradable seal coating with high bonding strength was developed through an effective mixing process that controls porosity and distributes spherical pores uniformly. Compared to aluminum-based coatings, this new coating shows superior performance in key indices such as hardness and porosity.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion mechanism of CuAl-NiC abradable seal coating system-The influence of porosity, multiphase, and multilayer structure on the corrosion failure

Yumeng Ni et al.

Summary: The corrosion behavior of the CuAl-NiC abradable seal coating system in chloride solution was systematically investigated, with a focus on the effects of porosity, multiphase, and multilayer structure on corrosion failure. Interphase selective corrosion and interlayer galvanic corrosion were identified as crucial factors leading to the corrosion failure of the system.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication and characterization of Yb2Si2O7-based composites as novel abradable sealing coatings

Dandan Qin et al.

Summary: The Yb2Si2O7 combined with hBN system exhibits lower hardness, lower friction coefficient, higher wear rate, and smaller IDR value than the pure Yb2Si2O7 coating, making it suitable for use in ASCs. However, excessive hBN can cause severe wear of the coatings. This study provides guidelines for the development of ASCs suitable for CMCs.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Review Materials Science, Coatings & Films

A Study on YSZ Abradable Seal Coatings Prepared by Atmospheric Plasma Spray and Mixed Solution Precursor Plasma Spray

Xiaoming Sun et al.

Summary: Yttria-stabilized zirconia (YSZ) ceramics are promising materials for abradable seal coatings. Two types of coatings, C-YSZ and M-YSZ, were prepared using different methods and characterized for their microstructure, mechanical properties, oxidation resistance, and hot corrosion resistance. While M-YSZ showed better oxidation resistance, both coatings failed to exhibit ideal hot corrosion resistance.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication and characterization of 8YSZ ceramic based abradable seal coatings by atmospheric plasma spraying

Xiqian Zhang et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Preparation and Performance of an Abradable NiCrFeAlBN-YSZ-NiCrAl Layered Seal Coating for Aircraft Engines

Xuying Cheng et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Study on thermal shock behavior of YSZ abradable sealing coating prepared by mixed solution precursor plasma spraying

X. M. Sun et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Preparation and characterization of YSZ abradable sealing coating through mixed solution precursor plasma spraying

Zhe Wang et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

High strength and high porosity YB2C2 ceramics prepared by a new high temperature reaction/partial sintering process

Heng Chen et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Physical

Microstructure and self-healing properties of multi-layered NiCoCrAlY/TAZ/YSZ thermal barrier coatings fabricated by atmospheric plasma spraying

L. Wang et al.

APPLIED SURFACE SCIENCE (2019)

添加到收藏夹

Article Materials Science, Ceramics

Mechanical and dielectric properties of porous and wave-transparent Si3N4-Si3N4 composite ceramics fabricated by 3D printing combined with chemical vapor infiltration

Zanlin Cheng et al.

JOURNAL OF ADVANCED CERAMICS (2019)

添加到收藏夹

Article Acoustics

Blade/casing rubbing interactions in aircraft engines: Numerical benchmark and design guidelines based on NASA rotor 37

Elsa Piollet et al.

JOURNAL OF SOUND AND VIBRATION (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

A novel technology of Sol precursor plasma spraying to obtain the ceramic matrix abradable sealing coating

Zhe Wang et al.

MATERIALS LETTERS (2019)

添加到收藏夹

Article Materials Science, Ceramics

The sintering behavior of plasma-sprayed YSZ coating over the delamination crack in low temperature environment

Hui Dong et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Ceramics

YSZ/MoS2 self-lubricating coating fabricated by thermal spraying and hydrothermal reaction

Shuangjian Li et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Engineering, Mechanical

Investigating the application of a honeycomb abradable lining in the turbine stage of an aero-engine

Boxiu Zhang et al.

TRIBOLOGY INTERNATIONAL (2018)

添加到收藏夹

Article Engineering, Mechanical

Wear mechanisms at the blade tip seal interface

Michael Watson et al.

WEAR (2018)

添加到收藏夹

Article Engineering, Mechanical

Effects of blade material characteristics on the high-speed rubbing behavior between Al-hBN abradable seal coatings and blades

Weihai Xue et al.

WEAR (2018)

添加到收藏夹

Article Engineering, Mechanical

Improvement of tribological properties of as-sprayed 8YSZ coatings by in-situ synthesis C/MoS2 composite lubricant

Wen Deng et al.

TRIBOLOGY INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Coatings & Films

Ti6Al4V Blade Wear Behavior During High-Speed Rubbing with NiAl-hBN Abradable Seal Coating

Weihai Xue et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)

添加到收藏夹

Article Materials Science, Coatings & Films

Edge Effect on Crack Patterns in Thermally Sprayed Ceramic Splats

Lin Chen et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Mechanical

Tribological characterization of a labyrinth-abradable interaction in a turbo engine application

C. Delebarre et al.

WEAR (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Influence of Porosity and Pore-Size Distribution in Ti6Al4 V Foam on Physicomechanical Properties, Osteogenesis, and Quantitative Validation of Bone Ingrowth by Micro-Computed Tomography

Kausik Kapat et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Bioinspired Porous Octacalcium Phosphate/Silk Fibroin Composite Coating Materials Prepared by Electrochemical Deposition

Ya Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

添加到收藏夹

Article Materials Science, Ceramics

Microstructural, mechanical and tribological properties of nanostructured YSZ coatings produced with different APS process parameters

C. Lamuta et al.

CERAMICS INTERNATIONAL (2015)

添加到收藏夹

Article Engineering, Mechanical

Material transfer behaviour between a Ti6Al4V blade and an aluminium hexagonal boron nitride abradable coating during high-speed rubbing

W. H. Xue et al.

WEAR (2015)

添加到收藏夹

Article Engineering, Mechanical

Effects of blade surface treatments in tip-shroud abradable contacts

M. Watson et al.

WEAR (2015)

添加到收藏夹

Article Chemistry, Physical

Numerical study on interaction of surface cracking and interfacial delamination in thermal barrier coatings under tension

W. Zhu et al.

APPLIED SURFACE SCIENCE (2014)

添加到收藏夹

Article Materials Science, Coatings & Films

Tribological Characterization of Plasma-Sprayed CoNiCrAlY-BN Abradable Coatings

E. Irissou et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Coated PHB on Properties of Abradable Seal Coating

Cheng Xudong et al.

JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2014)

添加到收藏夹

Article Materials Science, Coatings & Films

The influence of size and distribution of graphite on the friction and wear behavior of Ni-graphite coatings

J. J. Tang et al.

SURFACE & COATINGS TECHNOLOGY (2014)

添加到收藏夹

Article Materials Science, Coatings & Films

Investigating the anisotropic mechanical properties of plasma sprayed yttria-stabilised zirconia coatings

Andrew Siao Ming Ang et al.

SURFACE & COATINGS TECHNOLOGY (2014)

添加到收藏夹

Article Materials Science, Coatings & Films

Mechanical characterisation of AlSi-hBN, NiCrAl-Bentonite, and NiCrAl-Bentonite-hBN freestanding abradable coatings

R. E. Johnston

SURFACE & COATINGS TECHNOLOGY (2011)

添加到收藏夹

Article Engineering, Mechanical

Evaluation of abradable seal coating mechanical properties

Xiao Ma et al.

WEAR (2009)

添加到收藏夹

Article Materials Science, Coatings & Films

Freestanding abradable coating manufacture and tensile test development

R. E. Johnston et al.

SURFACE & COATINGS TECHNOLOGY (2007)

添加到收藏夹

Article Materials Science, Coatings & Films

Wear characteristics of plasma-sprayed nanostructured yttria partially stabilized zirconia coatings

SY Tao et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

The wear, deterioration and transformation phenomena of abradable coating BN-SiAl-bounding organic element, caused by the friction between the blades and the turbine casing

M Bounazef et al.

MATERIALS LETTERS (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.