相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Investigation into femtosecond based laser ablation and morphology of micro-hole in titanium alloy
P. Deepu et al.
OPTIK (2023)
Comprehensive ablation study of near-IR femtosecond laser action on the titanium-based alloy Ti6Al4V: morphological effects and surface structures at low and high fluences
Dubravka Milovanovic et al.
EUROPEAN PHYSICAL JOURNAL D (2022)
Experimental investigation and parametric optimisation of the hole-circularity and recast layer during the laser trepan drilling
Kedari Lal Dhaker et al.
AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING (2022)
Experimental study of nickel-based superalloy IN792 with femtosecond laser drilling method
Fengyun Zhang et al.
OPTICS AND LASER TECHNOLOGY (2021)
Ultrafast pulse laser inscription and surface quality characterization of micro-structured silicon wafer
S. Shalini et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Failure mechanism and lifetime of various laser-drilled APS-TBC systems under LCF conditions
V. Ebrahimzade et al.
ENGINEERING FAILURE ANALYSIS (2021)
Investigation on geometric precision and surface quality of microholes machined by ultrafast laser
Zhanfei Zhang et al.
OPTICS AND LASER TECHNOLOGY (2020)
Effect of high repetition rate on dimension and morphology of micro-hole drilled in metals by picosecond ultra-short pulse laser
Wanqin Zhao et al.
OPTICS AND LASERS IN ENGINEERING (2020)
Experimental study on nanosecond-millisecond combined pulse laser drilling of alumina ceramic with different spot sizes
Xianshi Jia et al.
OPTICS AND LASER TECHNOLOGY (2020)
Surface ablation properties and morphology evolution of K24 nickel based superalloy with femtosecond laser percussion drilling
Qiang Li et al.
OPTICS AND LASERS IN ENGINEERING (2019)
Two-step approach to improving the quality of laser micro-hole drilling on thermal barrier coated nickel base alloys
Rujia Wang et al.
OPTICS AND LASERS IN ENGINEERING (2019)
Theoretical and experimental investigations of ultra-short pulse laser interaction on Ti6Al4V alloy
K. Kiran Kumar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Drilling of micro-holes on titanium alloy using pulsed Nd:YAG laser: Parametric appraisal and prediction of performance characteristics
Suman Chatterjee et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2019)
Effect of machining parameter on femtosecond laser drilling processing on SiC/SiC composites
Yongsheng Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Experimental investigation on the spiral trepanning of K24 superalloy with femtosecond laser
Maolu Wang et al.
OPTICS AND LASER TECHNOLOGY (2018)
Self-cleaning effect in high quality percussion ablating of cooling hole by picosecond ultra-short pulse laser
Wanqin Zhao et al.
OPTICS AND LASERS IN ENGINEERING (2018)
Drilling of micron-scale high aspect ratio holes with ultra-short pulsed lasers: Critical effects of focusing lenses and fluence on the resulting holes' morphology
Vahid Nasrollahi et al.
OPTICS AND LASERS IN ENGINEERING (2018)
Experimental study on the development of a micro-drilling cycle using ultrashort laser pulses
L. Romoli et al.
OPTICS AND LASERS IN ENGINEERING (2016)
Effect of Repetition Rate on Femtosecond Laser-Induced Homogenous Microstructures
Sanchari Biswas et al.
MATERIALS (2016)
A review of accuracy enhancement in microdrilling operations
X. Hyacinth Suganthi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
STATE-OF-ART, CHALLENGES, AND OUTLOOK ON MANUFACTURING OF COOLING HOLES FOR TURBINE BLADES
Z. Y. Li et al.
MACHINING SCIENCE AND TECHNOLOGY (2015)
Thermomechanical response of 3D laser-deposited Ti-6Al-4V alloy over a wide range of strain rates and temperatures
Peng-Hui Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Experimental characterization of the inner surface in micro-drilling of spray holes: A comparison between ultrashort pulsed laser and EDM
L. Romoli et al.
OPTICS AND LASER TECHNOLOGY (2014)
Characterization of hole circularity and heat affected zone in pulsed CO2 laser drilling of alumina ceramics
A. Bharatish et al.
OPTICS AND LASER TECHNOLOGY (2013)
Characterization of hole circularity in pulsed Nd:YAG laser micro-drilling of TiN-Al2O3 composites
R. Biswas et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Effects of Process Parameters on Hole Circularity and Taper in Pulsed Nd:YAG Laser Microdrilling of Tin-Al2O3 Composites
Ranjib Biswas et al.
MATERIALS AND MANUFACTURING PROCESSES (2010)
Femtosecond laser machining of cooling holes in thermal barrier coated CMSX4 superalloy
Dipak K. Das et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Influence of machining parameters on surface roughness in Nd:YAG laser micro-cutting of alumina-aluminium interpenetrating phase composite
R. Biswas et al.
INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING (2008)
Investigating the recast layer formed during the laser trepan drilling of Inconel 718 using the Taguchi method
Wen-Tung Chien et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
Fatigue crack susceptibility of electrical discharge drilled holes in nickel based heat resistant alloy
SH Kang et al.
MATERIALS SCIENCE AND TECHNOLOGY (2006)
Laser drilling of cooling holes in aeroengines: state of the art and future challenges
CA McNally et al.
MATERIALS SCIENCE AND TECHNOLOGY (2004)
Geometrical features and metallurgical characteristics of Nd:YAG laser drilled holes in thick IN718 and Ti-6Al-4V sheets
S Bandyopadhyay et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Comparative statistical analysis of hole taper and circularity in laser percussion drilling
M Ghoreishi et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
分享论文
