☆ 4.4 Article

Topology optimization of lattice-core sandwich beams for energy absorption

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Energy absorption of foam-filled corrugated core sandwich panels under quasi-static loading

Hossein Taghipoor et al.

Summary: This paper investigates the effect of foam-filled on trapezoidal corrugated core and validates the results through experimental and numerical simulation. The results show that the bi-core sandwich panel without foam filling has a higher specific energy absorption rate.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2023)

添加到收藏夹

Article Mechanics

In-plane energy absorption characteristics and mechanical properties of novel re-entrant honeycombs

Xiaolin Deng et al.

Summary: This paper proposes novel re-entrant honeycombs (NREH), designed with asymmetrical subunits to improve their mechanical properties. Three types of NREHs are compared, with similar sigma m and specific energy absorption (SEA) during in-plane impact. However, NREH-3 has a smaller Poisson's ratio. Analysis shows that increasing the wall thickness effectively improves the impact resistance of NREH-3. Additionally, NREH-3 is sensitive to impact velocity, with deformation models changing significantly at higher velocities.

COMPOSITE STRUCTURES (2023)

添加到收藏夹

Article Engineering, Manufacturing

Crashworthiness performance of thin-walled, square tubes with circular hole discontinuities under high-speed impact loading

Hossein Taghipoor et al.

Summary: The study found that an increase in tube length did not affect the maximum force in square thin-wall tubes under high strain rates, while an increase in hole diameter led to a decrease in the maximum force. Additionally, compared to tubes without holes, the presence of holes in square thin-wall tubes reduced the collapse force efficiency.

INTERNATIONAL JOURNAL OF CRASHWORTHINESS (2022)

添加到收藏夹

Article Engineering, Manufacturing

Analytical and experimental investigations on axial crushing of aluminum tube with vertically corrugated

Arameh Eyvazian et al.

Summary: The study found that aluminum circular tubes with vertical corrugations have better crashworthiness and energy absorption characteristics. The combination of corrugation number and tube diameter impacts energy absorption capacity, while vertical corrugations increase peak force but result in smoother force-displacement curves. The influence of corrugation number on crashworthiness performance was investigated, and an analytical relationship was developed for mean force based on experimental results. Improved Technique of Order Preference by Similarity to Ideal Solution (ITOPSIS) was used to select the best structure for energy absorption purposes.

INTERNATIONAL JOURNAL OF CRASHWORTHINESS (2022)

添加到收藏夹

Article Engineering, Mechanical

Quasi-static axial crush response and energy absorption of composite wrapped metallic thin-walled tube

Hossein Taghipoor et al.

Summary: In this study, the energy absorption and collapse behaviors of composite-coated corrugation-reinforced cylindrical absorbers were investigated. The results showed that the composite-coating could improve the energy absorption, while the longitudinal and transverse corrugations had different effects on the performance of the absorbers. The use of combined corrugation could significantly impact the collapse behavior of the coated absorbers.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Crashworthiness analysis of gradient hierarchical multicellular columns evolved from the spatial folding

Xiaolin Deng et al.

Summary: Based on the gradient hierarchical distribution of vascular bundles of bamboo, the crashworthiness analysis of a gradient hierarchical multicellular column (GHMC) was conducted. The GHMC displayed better energy absorption ability compared to a square tube and could generate more folds.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Engineering, Civil

Experimental investigation of single and hybrid-fiber reinforced concrete under drop weight test

Hossein Taghipoor et al.

Summary: The use of fiber-reinforced concrete in various industries is developing due to its desired mechanical properties, lightweight structure, good energy absorption capacity, and high initial strength under impact loads.

STRUCTURES (2022)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Crashworthiness analysis and optimization of standard and windowed multi-cell hexagonal tubes

T. N. Tran et al.

Summary: The paper proposes windowed shaped cuttings to reduce the high PCL of multi-cell structures and seeks optimal crashworthiness design through systematic investigation. Results show that the wall-to-wall connection type is more effective for standard tubes, while less favorable for windowed tubes.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Hierarchical optimization of a novel vehicle door system under side impact based on integrated weighting method

Weiwei Wang et al.

Summary: This study introduces a novel door system that incorporates a negative Poisson's ratio structure for improved side crashworthiness and occupant protection. By conducting parameter sensitivity analysis and using a novel integrated weighting method, hierarchical optimization is performed to enhance overall performance in side structural crashworthiness, occupant protection, and lightweight design. The optimal door system demonstrates improved occupant protection and side crashworthiness compared to conventional doors.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2021)

添加到收藏夹

Article Engineering, Mechanical

Axial crushing and transverse bending responses of sandwich structures with lattice core

Hossein Taghipoor et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Modeling and multi-objective optimization of a bionic crash box with folding deformation

ChunYan Wang et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Multi-objective optimization of crashworthiness of vehicle front longitudinal beam

Hangyan Wang et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Crashworthiness analysis and multi-objective optimization of expanding circular tube energy absorbers with cylindrical anti-clamber under eccentric loading for subway vehicles

Weiyuan Guan et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2020)

添加到收藏夹

Article Engineering, Civil

Experimental investigation of the three-point bending properties of sandwich beams with polyurethane foam-filled lattice cores

Hossein Taghipoor et al.

STRUCTURES (2020)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Experimental and numerical study of lattice-core sandwich panels under low-speed impact

Hossein Taghipoor et al.

MATERIALS TODAY-PROCEEDINGS (2020)

添加到收藏夹

Article Engineering, Mechanical

Experimental and numerical investigation of lattice core sandwich beams under low-velocity bending impact

Hossein Taghipoor et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2019)

添加到收藏夹

Article Mechanics

Interval and subinterval homogenization-based method for determining the effective elastic properties of periodic microstructure with interval parameters

Ning Chen et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A survey of manufacturing oriented topology optimization methods

Jikai Liu et al.

ADVANCES IN ENGINEERING SOFTWARE (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

An optimization procedure for spot-welded structures based on SIMP method

Haiqiang Long et al.

COMPUTATIONAL MATERIALS SCIENCE (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

An explicit length scale control approach in SIMP-based topology optimization

Weisheng Zhang et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2014)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A hybrid topology optimization methodology combining simulated annealing and SIMP

N. P. Garcia-Lopez et al.

COMPUTERS & STRUCTURES (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Lattice truss structures from expanded metal sheet

Gregory W. Kooistra et al.

MATERIALS & DESIGN (2007)

添加到收藏夹

Article Engineering, Manufacturing

Topology optimization of energy-absorbing structures

X. Huang et al.

INTERNATIONAL JOURNAL OF CRASHWORTHINESS (2007)

添加到收藏夹

Article Materials Science, Composites

Fabrication and structural performance of periodic cellular metal sandwich structures

HNG Wadley et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2003)

添加到收藏夹

Article Mechanics

Collapse of truss core sandwich beams in 3-point bending

VS Deshpande et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2001)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A performance index for topology and shape optimization of plate bending problems with displacement constraints

QQ Liang et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2001)

添加到收藏夹

Article Engineering, Mechanical

Layered sacrificial claddings under blast loading Part I - analytical studies

S Guruprasad et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2000)

添加到收藏夹

Article Engineering, Mechanical

Layered sacrificial claddings under blast loading Part II - experimental studies

S Guruprasad et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.