☆ 4.7 Article

Improved densification in cold sintering of gadolinia-doped ceria with reactive sintering aids

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Cold Sintering of Highly Transparent Calcium Fluoride Nanoceramic as a Universal Platform for High-Power Lighting

Jie Gao et al.

Summary: This article reports a thermally robust all-inorganic color converter that can be used for high-power LED lighting. By utilizing an acid-mediated cold sintering process, oxygen-segregated CaF2 nanoparticles are densified, resulting in a visible transmittance of up to 75% at only 350 degrees C. Using optically isotropic CaF2 as a transparent platform, a phosphor-in-ceramics (PiC) converter based on Y3Al5O12:Ce3+ (YAG: Ce) phosphor is fabricated, achieving a luminous efficacy as high as 190 lm W-1. The cold-sintered CaF2 nanoceramic shows great potential as a general solution for next-generation high-power LED lighting.

ADVANCED FUNCTIONAL MATERIALS (2023)

添加到收藏夹

Article Materials Science, Ceramics

Mg3B2O6 microwave dielectric ceramics fabricated by combining cold sintering with post-annealing process

Mengjiao Chi et al.

Summary: In this study, pure-phase Mg3B2O6 ceramics were successfully obtained by combining the cold sintering and post-annealing process. The resulting ceramics exhibited high relative density and dense microstructure. The ceramics also showed excellent microwave dielectric properties.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2023)

添加到收藏夹

Article Materials Science, Ceramics

Lowering the sintering temperature of a gadolinia-doped ceria functional layer using a layered Bi2O3 sintering aid for solid oxide fuel cells

Hojae Lee et al.

Summary: The study develops a method for fabricating a dense gadolinia-doped ceria (GDC) functional layer using a sacrificial bismuth oxide, Bi2O3, sintering aid layer above the GDC layer, even under constrained sintering conditions. This approach improves the solid oxide fuel cell performance significantly.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Chemistry, Physical

Cold sintering-assisted densification of GDC electrolytes for SOFC applications

Murat Murutoglu et al.

Summary: Cold sintering is a novel technique that enables the densification of ceramics at lower temperatures. In the experiment, successful cold sintering at room temperature resulted in slightly higher redox potential values compared to conventional sintering methods.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Materials Science, Ceramics

Highly Improved Microwave Absorbing and Mechanical Properties in Cold Sintered ZnO by Incorporating Graphene Oxide

Jie Gao et al.

Summary: Cold sintering technology preserves the pristine structure of graphene oxide in ceramic composites, leading to improved performance. The cold-sintered ZnO composites show lower complex permittivity, superior impedance matching, and impressive microwave absorption and mechanical properties compared to conventional sintering methods.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

One-step synthesis and densification of BaTiO3 by reactive cold sintering

Ning Guo et al.

Summary: This article describes a one-step low-temperature reactive cold-sintering approach for preparing bulk BaTiO3 ceramics with nanograins. Densification is achieved through pressure-induced particle rearrangement and deposition of the reaction product, as well as grain coarsening. This method can also be applied to similar ceramics.

SCRIPTA MATERIALIA (2022)

添加到收藏夹

Article Materials Science, Ceramics

Effect of 20 mol % gadolinium doping on oxide ion conductivity of ceria as electrolyte for intermediate temperature solid oxide fuel cells

Naeemakhtar Momin et al.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

New antimicrobial materials with cerium ions in the composition of salts, solutions, and composite systems based on Ce3+(NO3)3 x 6H2O

Asiya A. Gainanova et al.

Summary: This study presents the detailed characterization of new antimicrobial materials and their inhibitory effects on Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. The combination with H-Beta zeolite enhances the preservation of antimicrobial activity in the dark.

NEW JOURNAL OF CHEMISTRY (2022)

添加到收藏夹

Article Materials Science, Ceramics

Hydrated precursor-assisted densification of hydroxyapatite and its composites by cold sintering

Ning Guo et al.

Summary: Densification of hydroxyapatite was achieved through cold sintering at temperatures below 200 ℃ with CaHPO4.2H2O as an additive. The influence of CaHPO4.2H2O content and temperature on the relative density of cold-sintered HA was investigated, with the elastic modulus, compressive strength, and flexural strength of the specimens slightly inferior to conventionally sintered dense HA. This strategy of densifying target products from their hydrated precursors presents a promising avenue for the development of cold sintering process.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Cold sintering of soda-lime glass

Levent Karacasulu et al.

Summary: The ordinary recycled soda lime glass powder was densified through cold sintering process with the aid of concentrated NaOH solution. Increasing processing time, temperature, and concentration of NaOH solution led to the formation of monolithic glass artifacts with higher relative densities. The highest densification (95.2%) was achieved when sintering was done at 250 degrees C for 20 minutes using 15 M NaOH solution.

SCRIPTA MATERIALIA (2021)

添加到收藏夹

Article Engineering, Environmental

Pd and GDC Co-infiltrated LSCM cathode for high-temperature CO2 electrolysis using solid oxide electrolysis cells

Seokhee Lee et al.

Summary: In this study, a modified cathode material based on LSCM is fabricated by co-infiltrating Pd metal and GDC nanoparticles, which enhances the electrocatalytic activity towards CO2 reduction. The increased numbers of active triple phase boundaries and surface oxygen vacancies resulting from the co-infiltration of Pd-GDC nanoparticles are attributed to the enhanced electrocatalytic activity of the Pd-GDC co-infiltrated LSCM cathode compared to LSCM.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Review Energy & Fuels

Achievements and trends of solid oxide fuel cells in clean energy field: a perspective review

Abdalla M. Abdalla et al.

FRONTIERS IN ENERGY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Solvent-deficient method lowers grain-boundary resistivity of doped ceria

Hiraku Maruyama et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Single-step densification of nanocrystalline CeO2 by the cold sintering process

Thomasina H. Zaengle et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Chemistry, Physical

Performance of GDC with alkali metal carbonates as sintering aids

Joao P. F. Grilo et al.

SOLID STATE IONICS (2020)

添加到收藏夹

Article Materials Science, Ceramics

Effect of cold sintering process (CSP) on the electro-chemo-mechanical properties of Gd-doped ceria (GDC)

Ahsanul Kabir et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Direct addition of lithium and cobalt precursors to Ce0.8Gd0.2O1.95 electrolytes to improve microstructural and electrochemical properties in IT-SOFC at lower sintering temperature

Grazia Accardo et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Ceramics

Solvent-deficient synthesis of cerium oxide: Characterization and kinetics

Sasa Zeljkovic et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Review Energy & Fuels

Latest development of double perovskite electrode materials for solid oxide fuel cells: a review

Shammya Afroze et al.

FRONTIERS IN ENERGY (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Grain growth during spark plasma and flash sintering of ceramic nanoparticles: a review

Rachman Chaim et al.

JOURNAL OF MATERIALS SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

The Effect of Particle Shape on Sintering Behavior and Compressive Strength of Porous Alumina

Kimiya Miyake et al.

MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Gadolinium doped ceria interlayers for Solid Oxide Fuel Cells cathodes: Enhanced reactivity With sintering aids (Li, Cu, Zn), and improved densification by infiltration

Clement Nicollet et al.

JOURNAL OF POWER SOURCES (2017)

添加到收藏夹

Article Chemistry, Physical

Enhanced oxygen permeability and electronic conductivity of Ce0.8Gd0.2O2 - δ membrane via the addition of sintering aids

Chi Zhang et al.

SOLID STATE IONICS (2017)

添加到收藏夹

Article Materials Science, Ceramics

Conventional and field-assisted sintering of nanosized Gd-doped ceria synthesized by co-precipitation

M. Biesuz et al.

CERAMICS INTERNATIONAL (2016)

添加到收藏夹

Article Materials Science, Ceramics

Effect of Sm and Gd dopants on structural characteristics and ionic conductivity of ceria

Aliye Arabaci

CERAMICS INTERNATIONAL (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synthesis of metal oxide nanoparticles via a robust solvent-deficient method

Stacey J. Smith et al.

NANOSCALE (2015)

添加到收藏夹

Article Engineering, Chemical

Synthesis of Porous Submicron Gd0.1Ce0.9O1.95 Particles by Carbon Nanoparticle-Addition Ultrasonic Spray Pyrolysis (CNA-USP) and Nanoparticle Preparation by Ball Milling

T. Kinoshita et al.

AEROSOL SCIENCE AND TECHNOLOGY (2014)

添加到收藏夹

Article Chemistry, Physical

Effect of sintering aid (CoO) on transport properties of nanocrystalline Gd doped ceria (GDC) materials prepared by co-precipitation method

Ashok Kumar Baral et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2013)

添加到收藏夹

Article Materials Science, Ceramics

The Effect of Particle Size Distributions on the Microstructural Evolution During Sintering

Rasmus Bjork et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2013)

添加到收藏夹

Article Physics, Applied

Direct evidence of dopant segregation in Gd-doped ceria

Zhi-Peng Li et al.

APPLIED PHYSICS LETTERS (2011)

添加到收藏夹

Article Materials Science, Ceramics

Effect of Starting Particle Size and Oxygen Content on Densification of ZrB2

Matthew Thompson et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)

添加到收藏夹

Article Chemistry, Physical

Low-temperature sintering behaviors of nanosized Ce0.8Gd0.2O1.9 powder synthesized by co-precipitation combined with supercritical drying

Jinping Liang et al.

JOURNAL OF POWER SOURCES (2009)

添加到收藏夹

Article Materials Science, Ceramics

Design of electroceramics for solid oxides fuel cell applications: Playing with ceria

Vincenzo Esposito et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)

添加到收藏夹

Article Chemistry, Applied

Study on agglomeration and densification behaviors of gadolinium-doped ceria ceramics

Luo Dan et al.

JOURNAL OF RARE EARTHS (2007)

添加到收藏夹

Article Multidisciplinary Sciences

A high-performance cathode for the next generation of solid-oxide fuel cells

ZP Shao et al.

NATURE (2004)

添加到收藏夹

Article Chemistry, Physical

Ni-Ce0.9Gd0.1O1.95 anode for GDC electrolyte-based low-temperature SOFCs

SW Zha et al.

SOLID STATE IONICS (2004)

添加到收藏夹

Review Chemistry, Physical

Physical, chemical and electrochemical properties of pure and doped ceria

M Mogensen et al.

SOLID STATE IONICS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.