☆ 4.6 Article

Post-buckling behavior and failure analysis of asymmetric sandwich panels under uniaxial compression

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Civil

On damage behavior and stability of composite T-shaped stiffened panels under compression after impact considering impact locations

Ang Peng et al.

Summary: The impact location has a significant influence on the damage behavior and residual performance of composite stiffened panels. The study shows that impact at the skin center has little effect on residual performance, while impact at the flange tip leads to early buckling and compression failure of the local skin.

THIN-WALLED STRUCTURES (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

Flexural property evaluation of web reinforced GFRP-PET foam sandwich panel: Experimental study and numerical simulation

Honglei Xie et al.

Summary: This study focused on the flexural property of PET foam-filled lattice composite sandwich panels under four-point bending. Increasing the thickness of face sheet and PET foam can effectively improve the ultimate load of the panels. Experimental results and theoretical predictions showed errors within 10% for bending stiffness and ultimate load.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Engineering, Mechanical

On stability and damage behavior of asymmetric sandwich panels under uniaxial compression

Jian Deng et al.

Summary: The study demonstrates that the stability and failure behavior of asymmetric sandwich panels are significantly influenced by the tapered region, which intensifies the asymmetry and introduces additional bending moments. Thicker core thickness enhances structural stiffness and load-bearing capacity. Large amounts of matrix cracking, fiber push-out, and core-skin delamination were observed in asymmetric sandwich panels.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2021)

添加到收藏夹

Article Mechanics

Failure behavior of scarf-bonded woven fabric CFRP laminates

Evren Sonat et al.

Summary: The study shows that increasing scarf angle reduces the tensile strength of the repaired composite structures, resulting in different types of failure. Finite element analysis using cohesive zone modeling accurately predicts the experimentally observed response, with stress concentration distribution over the bonding area playing a crucial role in determining the failure type. Further investigation reveals that adhesive defects can significantly decrease the strength of the bonded specimens.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

A novel computational framework for exact stress analysis and bending behavior of sandwich panels with non-homogeneous cores

Jian Deng et al.

Summary: A novel computational framework is proposed for accurate stress analysis of sandwich panels with any non-homogeneous cores based on the quadrature element method (QEM). Through an explicit formulation for an arbitrary number of nodes and nodes of any type, an accurate stiffness matrix can be obtained to predict the deformation and stress components of sandwich panels under different loads accurately.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Elasticity Solution for Bending and Frequency Behavior of Sandwich Cylindrical Shell with FG-CNTRC Face-Sheets and Polymer Core Under Initial Stresses

M. Safarpour et al.

Summary: This paper investigates the high-accuracy analysis of bending and frequency response of a sandwich cylindrical shell with functionally graded carbon nanotubes reinforced composite face-sheets and a polymeric core under various mechanical loading and initial axial stress conditions. The study presents analytical solutions and employs the state-space based differential quadrature method to determine the bending and frequency response of the structure, providing insights into the influences of parameters such as initial stress and mechanical loading. Results of the study can be used as benchmarks to evaluate the validity of the traditional two-dimensional theory.

INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2021)

添加到收藏夹

Article Mechanics

Static and free vibration analysis of graphene platelets reinforced composite truncated conical shell, cylindrical shell, and annular plate using theory of elasticity and DQM

M. Safarpour et al.

MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES (2020)

添加到收藏夹

Article Mechanics

Three-point bending of an expanded-tapered sandwich beam-Analytical and numerical FEM study

Krzysztof Magnucki et al.

MECHANICS RESEARCH COMMUNICATIONS (2020)

添加到收藏夹

Article Mechanics

Discrete tailored asymmetric sandwich structures

Axel Fink et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Stability and Failure of the Edge-Closed Honeycomb Sandwich Panels with Face/Core Debonding

Bing Yan et al.

APPLIED SCIENCES-BASEL (2020)

添加到收藏夹

Article Engineering, Aerospace

Progressive Failure Analysis Using Global-Local Coupling Including Intralaminar Failure and Debonding

Margarita Akterskaia et al.

AIAA JOURNAL (2019)

添加到收藏夹

Article Construction & Building Technology

Experimental and numerical investigation on enhancing the structural integrity of composite sandwich structure

A. Mostafa

ADVANCES IN STRUCTURAL ENGINEERING (2019)

添加到收藏夹

Review Engineering, Multidisciplinary

Review of current trends in research and applications of sandwich structures

Victor Birman et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Mechanics

Optimization of postbuckling behaviour of variable thickness composite panels with variable angle tows: Towards Buckle-Free design concept

Zhangming Wu et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)

添加到收藏夹

Article Engineering, Civil

Bending analysis of sandwich plates with different face sheet materials and functionally graded soft core

Dongdong Li et al.

THIN-WALLED STRUCTURES (2018)

添加到收藏夹

Article Engineering, Mechanical

Tensile and compressive performances of foam core sandwich composites with various core modifications

Huseyin E. Yalkin et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Buckling, postbuckling and progressive failure analyses of composite laminated plates under compressive loading

Omer Namdar et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Mechanics

Natural frequencies and critical temperatures of functionally graded sandwich plates subjected to uniform and non-uniform temperature distributions

Fiorenzo A. Fazzolari

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Engineering, Mechanical

Characterizing failure behaviors of debonded composite sandwich structures under compressive loading

Yi-Hsin Nieh et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2015)

添加到收藏夹

Article Engineering, Mechanical

Failure of uniformly compression loaded debond damaged sandwich panels - An experimental and numerical study

Ramin Moslemian et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2012)

添加到收藏夹

Article Engineering, Mechanical

Sandwich Materials for Wind Turbine Blades - Present and Future

Ole Thybo Thomsen

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2009)

添加到收藏夹

Article Mechanics

An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models

A. Turon et al.

ENGINEERING FRACTURE MECHANICS (2007)

添加到收藏夹

Article Engineering, Manufacturing

A comprehensive failure model for crashworthiness simulation of aluminium extrusions

H Hooputra et al.

INTERNATIONAL JOURNAL OF CRASHWORTHINESS (2004)

添加到收藏夹

Article Engineering, Aerospace

Design and manufacturing of aerospace composite structures, state-of-the-art assessment

CE Harris et al.

JOURNAL OF AIRCRAFT (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

Isotropic constitutive models for metallic foams

VS Deshpande et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.