4.8 Article

Experimental identification of the impact of direct internal and external methane reforming on SOFC by detailed online monitoring and supporting measurements

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Review Energy & Fuels

Electrochemical Impedance Spectroscopy: A New Chapter in the Fast and Accurate Estimation of the State of Health for Lithium-Ion Batteries

Ming Zhang et al.

Summary: With the increasing application scope and scale of lithium-ion batteries, real-time and accurate monitoring of its state of health plays an important role in ensuring the healthy and stable operation of an energy storage system. Recently, electrochemical impedance spectroscopy has been developed to estimate the state of health quickly and accurately online by measuring battery impedance in a wide frequency range. This paper summarizes the latest impedance spectroscopy measurement technology and its application in estimating the health state of lithium-ion batteries, filling the gap in this aspect and contributing to the further development of this technology.

ENERGIES (2023)

Article Chemistry, Physical

Fast and safe heating-up control of a planar solid oxide cell stack: A three-dimensional model-in-the-loop study

Yingtian Chi et al.

Summary: This study proposes an adaptive model predictive controller to regulate the heating-up process of solid oxide cell stacks, achieving shorter heating time by fully utilizing the safety limit. The controller is validated with a calibrated 3D model and simulations under various heating modes, demonstrating its effectiveness.

JOURNAL OF POWER SOURCES (2023)

Article Chemistry, Physical

Methane internal steam reforming in solid oxide fuel cells at intermediate temperatures

Muhammad Shirjeel Khan et al.

Summary: In this study, a low temperature sinterable catalyst CNMnO was applied on Ni-YSZ for steam reforming, showing excellent performance and durability, with potential application in solid oxide fuel cells.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Chemistry, Physical

Accelerated degradation for solid oxide electrolysers: Analysis and prediction of performance for varying operating environments

Benjamin Koenigshofer et al.

Summary: Solid oxide electrolysis cells (SOECs) are efficient energy technology, and accelerating the evaluation of their performance and durability is crucial for their development.

JOURNAL OF POWER SOURCES (2022)

Article Energy & Fuels

Ni-Ce-ZrO2 system as anode material for direct internal reforming biogas solid oxide fuel cells

Maria Jose Escudero et al.

Summary: This paper focuses on the synthesis of ceria-doped Ni-ZrO2 nanocrystals and its application as an anode material for solid oxide fuel cells fueled by biogas. The electrochemical behavior of the material was evaluated and it was found that the limiting factor of cell performance is the low-frequency electrode processes related to gas diffusion and reforming reactions. The cell showed stable performance in biogas.
Review Chemistry, Physical

Methane reforming in solid oxide fuel cells: Challenges and strategies

Liyuan Fan et al.

Summary: Methane, derived from fossil fuels, is widely used for hydrogen production via the reforming process. However, due to environmental concerns, biogas derived from biomass is being explored as a sustainable alternative. The application of biogas in solid oxide fuel cells for hydrogen and power production is gaining attention, but challenges such as carbon deposition and catalyst stability need to be addressed.

JOURNAL OF POWER SOURCES (2022)

Article Energy & Fuels

In operando electrochemical impedance spectroscopy monitoring of nickel catalysts for hydrogen production, Part I: Methodology and performance characterization

Michael Hoeber et al.

Summary: More than 75% of today's H-2 production is based on reforming processes using heterogeneous catalysts. However, there is no established direct online monitoring method for commercial Ni-based catalysts. This study demonstrates the use of electrochemical impedance spectroscopy for online monitoring of Ni catalysts and examines the impact of different contacting methods on measurement results.
Review Thermodynamics

Analysis of solid oxide fuel and electrolysis cells operated in a real-system environment: State-of-the-health diagnostic, failure modes, degradation mitigation and performance regeneration

Vanja Subotic et al.

Summary: This paper reviews the existing knowledge about solid oxide fuel cells and electrolysis systems, discussing their operation and degradation-related issues. The analysis includes different fuels and conditions, providing guidance on predicting, identifying, and preventing degradation. Additionally, the paper summarizes the application of diagnostic tools and suggests methods to accelerate degradation and regenerate performance.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2022)

Article Green & Sustainable Science & Technology

Advances on methane reforming in solid oxide fuel cells

Liyuan Fan et al.

Summary: With the increasing demand for green hydrogen and energy production, as well as advances in fuel cell technology, biogas, as a renewable energy resource containing methane, is considered a promising fuel. Solid oxide fuel cells with internal methane reforming capabilities are seen as a economically viable technology for hydrogen and power generation, due to their fuel flexibility and high efficiency.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Article Energy & Fuels

Investigation of solid oxide fuel cell operation with synthetic biomass gasification product gases as a basis for enhancing its performance

G. Pongratz et al.

Summary: Solid oxide fuel cells show potential in biomass gasification systems, with research on gas component ratios aiding in stability and electric efficiency, ultimately increasing the attractiveness of electricity production from biomass.

BIOMASS CONVERSION AND BIOREFINERY (2021)

Article Energy & Fuels

Performance assessment and evaluation of SOC stacks designed for application in a reversible operated 150 kW rSOC power plant

Benjamin Koenigshofer et al.

Summary: Combining renewable energy sources with reversible operated high temperature solid oxide cells (rSOC) shows promise for storing and supplying clean energy. Experimental investigations on the performance of a rSOC stack under system relevant gas mixtures and operational conditions revealed different advantages and disadvantages between steam electrolysis (EC) and fuel cell (FC) operation.

APPLIED ENERGY (2021)

Article Electrochemistry

Degradation Analysis of Long-Term Solid Oxide Fuel Cell Stacks with Respect to Chromium Poisoning in La0.58Sr0.4Co0.2Fe0.8O3-δ and La0.6Sr0.4CoO3-δ Cathodes

Qingping Fang et al.

Summary: It has been found that the LSC cathode shows more promising results in SOFCs compared to the LSCF cathode, with higher ionic conductivity and better resistance to chromium poisoning. Through long-term stack operation and various analyses, the degradation behavior of the stack due to chromium poisoning can be evaluated.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Article Engineering, Chemical

Holistic Approach to Design, Test, and Optimize Stand-Alone SOFC-Reformer Systems

Michael Hoeber et al.

Summary: This study focuses on the design and testing process of stand-alone stationary power generators based on solid oxide fuel cells (SOFC), demonstrating their stable gas composition values and high efficiency. The theoretical degradation free operating conditions are identified, and the system achieves high current densities without cell degradation during long-term tests of over 500 hours.

PROCESSES (2021)

Article Chemistry, Physical

CFD model for tubular SOFC directly fed by biomass

Valentina Somano et al.

Summary: The research aims to develop a sustainable and efficient system by coupling biomass gasification with Solid Oxide Fuel Cells, proposing the utilization of agricultural residues for energy purposes, and simulating processes to find a configuration for power generation. The results showed that integrating biomass gasification into the SOFC box achieved a higher power output compared to externally produced syngas.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Electrochemistry

Fuel flexibility of solid oxide fuel cells

Andre Weber

Summary: One of the major advantages of SOFCs is their high fuel flexibility, with various fuels such as propane, ammonia, and diesel being applicable for testing. The performance of different fuels on a single cell test bench is similar, but proper fuel processing is essential at the system level.

FUEL CELLS (2021)

Article Green & Sustainable Science & Technology

On the technical challenges affecting the performance of direct internal reforming biogas solid oxide fuel cells

Mohammad Ali Abdelkareem et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

Article Chemistry, Physical

Electrochemical properties and thermal neutral state of solid oxide fuel cells with direct internal reforming of methane

Zewei Lyu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Chemistry, Physical

Structural evolution of carbon deposition on a Ni/YSZ cermet of a SOFC analyzed by soft x-ray XANES spectroscopy

Hirotatsu Watanabe et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Proceedings Paper Energy & Fuels

Online monitoring tools for SoH diagnostic and prognostic of remaining lifetime of reversible solid oxide cell (rSOC) systems

Vanja Subotic et al.

INNOVATIVE SOLUTIONS FOR ENERGY TRANSITIONS (2019)

Article Electrochemistry

SOFC operation with carbon oxides: Experimental analysis of performance and degradation

Bernhard Stoeckl et al.

ELECTROCHIMICA ACTA (2018)

Article Chemistry, Physical

Effects of applied current density and thermal cycling on the degradation of a solid oxide fuel cell cathode

Muhammad Zubair Khan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Electrochemistry

Nature and Functionality of La0.58Sr0.4Co0.2Fe0.8O3-δ / Gd0.2Ce0.8O2-δ / Y0.16Zr0.84O2-δ Interfaces in SOFCs

Julian Szasz et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Proceedings Paper Electrochemistry

Degradation of SOFCs by Various Impurities: Impedance Spectroscopy and Microstructural Analysis

Y. Kikuchi et al.

SOLID OXIDE FUEL CELLS 15 (SOFC-XV) (2017)

Article Agriculture, Multidisciplinary

Effects of on-farm composted tomato residues on soil biological activity and yields in a tomato cropping system

Catello Pane et al.

CHEMICAL AND BIOLOGICAL TECHNOLOGIES IN AGRICULTURE (2015)

Review Chemistry, Physical

Carbon deposition in CH4/CO2 operated SOFC: Simulation and experimentation studies

K. Girona et al.

JOURNAL OF POWER SOURCES (2012)

Article Electrochemistry

Electrochemical Analysis of Sulfur-Poisoning in Anode Supported SOFCs Fuelled with a Model Reformate

A. Kromp et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)

Review Biochemistry & Molecular Biology

A Review of RedOx Cycling of Solid Oxide Fuel Cells Anode

Antonin Faes et al.

MEMBRANES (2012)

Proceedings Paper Electrochemistry

Hydrogen Oxidation Kinetics in Reformate-Fuelled Anode Supported SOFC

A. Kromp et al.

SOLID OXIDE FUEL CELLS 12 (SOFC XII) (2011)

Article Agricultural Engineering

Evaluation of the biogas productivity potential of some Italian agro-industrial biomasses

E. Dinuccio et al.

BIORESOURCE TECHNOLOGY (2010)

Article Chemistry, Analytical

Direct detection of coke deposits on fixed bed catalysts by electrical sensors

N. Mueller et al.

SENSORS AND ACTUATORS B-CHEMICAL (2010)

Article Chemistry, Physical

Oxidation failure modes of anode-supported solid oxide fuel cells

D. Sarantaridis et al.

JOURNAL OF POWER SOURCES (2008)

Article Electrochemistry

Evaluation and modeling of the cell resistance in anode-supported solid oxide fuel cells

A. Leonide et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2008)

Article Chemistry, Physical

Direct operation of solid oxide fuel cells with methane fuel

YB Lin et al.

SOLID STATE IONICS (2005)

Article Chemistry, Physical

Study on steam reforming of CH4 and C2 hydrocarbons and carbon deposition on Ni-YSZ cermets

T Takeguchi et al.

JOURNAL OF POWER SOURCES (2002)

Article Electrochemistry

A rugged oxygen gas sensor with solid reference for high temperature applications

AKMS Chowdhury et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)