4.8 Article

poly(vinylidene fluoride)-based dual-salt composite polymer electrolytes for superior room-temperature solid-state lithium batteries

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Effect of LiBOB content on electrochemical performance of Li-O2 batteries

Mengyuan Song et al.

Summary: Lithium-oxygen batteries have high energy density, but conventional liquid electrolytes struggle to form a stable solid electrolyte interface (SEI) on the cathode surface for long-term stable cycling. LiBOB is added to the LiTFSI-based electrolyte to solve this issue. The introduction of LiBOB induces the dissociation equilibrium of the lithium salt positively, resulting in an electrolyte with good ionic conductivity. Different amounts of LiBOB exhibit different characteristics in electrochemical performance, with trace amounts improving discharge capacity. The synergistic effect of the LiTFSI-LiBOB dual-salt electrolyte forms a protective SEI, leading to comparable cycling performance.

JOURNAL OF POWER SOURCES (2023)

Article Chemistry, Physical

Solid polymer electrolyte with in-situ generated fast Li+ conducting network enable high voltage and dendrite-free lithium metal battery

Meng Yao et al.

Summary: This study presents a solid polymer electrolyte (SPE) with a fast Li+ conducting network, enhancing thermal stability and performance of solid lithium metal batteries (SLMBs). The SPE showed promising ionic conductivity and Young's modulus, leading to stable cycling performance in wide temperature ranges and high energy density for practical applications. The design strategy provides a dynamic approach for fabricating SPEs with wide-temperature applicability and high energy density SLMBs.

ENERGY STORAGE MATERIALS (2022)

Article Engineering, Environmental

Poly (vinyl ethylene carbonate)-based dual-salt gel polymer electrolyte enabling high voltage lithium metal batteries

Qingjie Zhou et al.

Summary: A novel dual-salt gel polymer electrolyte has been developed, demonstrating high ionic conductivity and excellent cycling stability, which can improve the high-voltage tolerance and safety of rechargeable lithium metal batteries.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Hydrogen bonds enhanced composite polymer electrolyte for high-voltage cathode of solid-state lithium battery

Yongtao Wang et al.

Summary: A series of composite solid electrolytes (CSEs) with wide electrochemical stability window and high ionic conductivity were successfully prepared by integrating SiO2 nanoparticles into poly(vinyl ethylene carbonate) polymer electrolyte. These CSEs exhibit enhanced anti-oxidation performances and can be applied in SSLBs with high-voltage cathodes.

NANO ENERGY (2022)

Article Multidisciplinary Sciences

Carbon-free and binder-free Li-Al alloy anode enabling an all-solid-state Li-S battery with high energy and stability

Hui Pan et al.

Summary: This study proposes the use of aluminum as a carbon-free and binder-free anode for all-solid-state Li-S batteries. The aluminum anode shows excellent compatibility and stability with the electrolyte, and the all-solid-state Li-S battery exhibits good cycling performance and specific energy. This work provides a feasible anode selection for all-solid-state Li-S batteries and promotes their practical application.

SCIENCE ADVANCES (2022)

Article Chemistry, Physical

Modified Poly(vinylidene fluoride-co-hexafluoropropylene) Polymer Electrolyte for Enhanced Stability and Polymer Degradation Inhibition toward the Li Metal Anode

Maoxia Yang et al.

Summary: This study investigates the modification of PVDF-HFP polymer electrolyte with LiOH during the synthesis process to improve stability towards Li metal anodes. The modified electrolyte demonstrates an extended electrochemical stable window and cycle time, as well as the suppression of Li dendrite growth. These findings contribute to the development of safe all-solid-state Li metal batteries.

ACS APPLIED ENERGY MATERIALS (2022)

Article Chemistry, Physical

Polymer electrolytes based on interactions between [solvent-Li+] complex and solvent-modified polymer

Qiuyan Liu et al.

Summary: This paper investigates the PVDF-based polymer electrolyte and demonstrates that it is based on the interactions between the solvent-Li+ complex and the polymer. This electrolyte exhibits high ionic conductivity, Li-ion transference number, and Young's modulus, making it suitable for solid lithium batteries and as an ion-conducting binder for electrodes.

ENERGY STORAGE MATERIALS (2022)

Review Chemistry, Physical

Garnet Solid Electrolyte for Advanced All-Solid-State Li Batteries

Laiqiang Xu et al.

Summary: This article discusses the importance of all-solid-state lithium batteries in the field of energy storage, explores the challenges faced by garnet-type solid electrolytes, and proposes prospective developments and alternative approaches to solving the issues of solid-state electrolytes.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

(Oxalato)borate: The key ingredient for polyethylene oxide based composite electrolyte to achieve ultra-stable performance of high voltage solid-state LiNi0.8Co0.1Mn0.1O2/lithium metal battery

Samson Ho-Sum Cheng et al.

Summary: The dual-salts reinforced PEO/garnet solid-state composite electrolyte developed in this study exhibits high ionic conductivity and excellent electrochemical stability, making it suitable for room temperature cycling of high voltage cathodes with Li metal batteries. The optimized electrolyte can effectively improve the specific capacity of NCM811 solid-state cells and achieve stable cycling performance for over 200 cycles at 25 degrees Celsius.

NANO ENERGY (2021)

Article Chemistry, Physical

Influences and Mechanisms of Water on a Solid Electrolyte Interphase Film for Lithium-Ion Batteries

Zhaojuan Li et al.

Summary: Trace water has a fatal impact on the performance of lithium-ion batteries, as shown in this study where additional H2O alters solvent structures and leads to excessive SEI film growth. These findings highlight the detrimental effects of water impurities on the conductive properties of SEI films and the electrochemical performance of LIBs.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

Bridging Interparticle Li+ Conduction in a Soft Ceramic Oxide Electrolyte

Wan-Ping Chen et al.

Summary: Uniform conjugated polymer nanocoating on ceramic oxide particles surface enables Li+ conduction pathways between adjacent particles in unsintered ceramics. Thin-film electrolyte prepared from polymer-coated ceramic particles shows sufficient ionic conductivity for stable cycling of symmetric Li/Li cells and all-solid-state rechargeable Li-metal cells.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Article Chemistry, Physical

Solvent-Free Process for Blended PVDF-HFP/PEO and LLZTO Composite Solid Electrolytes with Enhanced Mechanical and Electrochemical Properties for Lithium Metal Batteries

Rong-Ao Tong et al.

Summary: The study focuses on the development of a solvent-free preparation and matrix modification process for all-solid-state composite electrolytes, which combines the advantages of two polymers to achieve excellent performance in terms of strength and ductility. The optimized process enhances the electrochemical and cycle stability of the electrolytes, while the simple solvent-free method lays the foundation for scale-up production.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Physical

In Situ Synthesis of a Li6.4La3Zr1.4Ta0.6O12/Poly(vinylene carbonate) Hybrid Solid-State Electrolyte with Enhanced Ionic Conductivity and Stability

Xingyu Huang et al.

Summary: Solid-state electrolytes are crucial for designing safe lithium batteries, but currently face challenges with low ionic conductivity. A hybrid of LLZTO/PVCA has been developed to improve conductivity, leading to enhanced electrochemical performance and cycling stability, demonstrating promising application potential.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Early-stage decomposition of solid polymer electrolytes in Li-metal batteries

Edvin K. W. Andersson et al.

Summary: This study investigates the stability of three different solid polymer electrolytes (PEO, PCL, and PTMC) with lithium metal (LiTFSI), identifying a competing degradation phenomenon under different polymer hosts with the PTMC:LiTFSI system showing the most severe decomposition. The movement of lithium species through the decomposed interface also shows significant variation depending on the polymer electrolyte system.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Nanoscience & Nanotechnology

A Simple and Highly Efficient Method toward High-Density Garnet-Type LLZTO Solid-State Electrolyte

Fei Shen et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Review Nanoscience & Nanotechnology

Designing polymers for advanced battery chemistries

Jeffrey Lopez et al.

NATURE REVIEWS MATERIALS (2019)

Article Materials Science, Multidisciplinary

A new type of composite electrolyte with high performance for room-temperature solid-state lithium battery

Huan-Liang Guo et al.

JOURNAL OF MATERIALS SCIENCE (2019)

Article Electrochemistry

Computational Screening of Anode Materials for Sodium-Ion Batteries

Seungho Yu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Article Chemistry, Multidisciplinary

Studies of air-exposure effects and remediation measures on lithium bis(oxalato)borate

Chunlei Li et al.

NEW JOURNAL OF CHEMISTRY (2019)

Review Chemistry, Multidisciplinary

30 Years of Lithium-Ion Batteries

Matthew Li et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Physical

Crosslinked Poly(tetrahydrofuran) as a Loosely Coordinating Polymer Electrolyte

David G. Mackanic et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Physical

A durable and safe solid-state lithium battery with a hybrid electrolyte membrane

Wenqiang Zhang et al.

NANO ENERGY (2018)

Article Chemistry, Multidisciplinary

A Dual-Crosslinking Design for Resilient Lithium-Ion Conductors

Jeffrey Lopez et al.

ADVANCED MATERIALS (2018)

Article Materials Science, Multidisciplinary

Influence of microstructure and AlPO4 secondary-phase on the ionic conductivity of Li1.3Al0.3Ti1.7(PO4)3 solid-state electrolyte

Shicheng Yu et al.

FUNCTIONAL MATERIALS LETTERS (2016)

Article Chemistry, Physical

Mixed salts of LiTFSI and LiBOB for stable LiFePO4-based batteries at elevated temperatures

Xilin Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Article Chemistry, Multidisciplinary

Composite of a nonwoven fabric with poly(vinylidene fluoride) as a gel membrane of high safety for lithium ion battery

Yusong Zhu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2013)

Article Electrochemistry

Ionic mobility in ternary polymer electrolytes for lithium-ion batteries

Mario Joost et al.

ELECTROCHIMICA ACTA (2012)

Review Chemistry, Multidisciplinary

Ti-based compounds as anode materials for Li-ion batteries

Guan-Nan Zhu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Article Chemistry, Physical

Electrochemical behavior of Al in a non-aqueous alkyl carbonate solution containing LiBOB salt

Seung-Taek Myung et al.

JOURNAL OF POWER SOURCES (2010)

Article Spectroscopy

Analysis of Raman and infrared spectra of poly (vinylidene fluoride) irradiated by KrF excimer laser

Yaling Ji et al.

SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2008)

Article Electrochemistry

Passivation of aluminum in lithium-ion battery electrolytes with LiBOB

Xueyuan Zhang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)

Article Electrochemistry

NMR determination of trace water in lithium salts for battery electrolytes

HG Schweiger et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)

Article Electrochemistry

LiBOB as salt for lithium-ion batteries - A possible solution for high temperature operation

K Xu et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2002)