☆ 4.7 Article

Microstructure and strain rate dependences of plastic deformation in diamond-like carbon films during nanoindentation

JOURNAL OF NON-CRYSTALLINE SOLIDS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Nanoindentation-induced deformation behaviors of tetrahedral amorphous carbon film deposited by cathodic vacuum arc with different substrate bias voltages

Lijun Wang et al.

Summary: Research on diamond-like carbon (DLC) thin films found that the properties and morphology of these films were highly controlled by the bias voltage during preparation, with mechanical properties significantly dependent on the applied voltage. Transmission electron microscopy observed the microstructure and interfaces of the DLC films, while nano-indentation tests revealed the deformation and crack formation mechanisms under different voltage conditions.

APPLIED SURFACE SCIENCE (2022)

添加到收藏夹

Article Materials Science, Ceramics

The sp2-sp3 transition and shear slipping dominating the compressive deformation of diamond-like carbon

Yifeng Yu et al.

Summary: The mechanical properties and deformation mechanisms of diamond-like carbon (DLC) films were studied through molecular dynamics simulation. It was found that sp(2)-sp(3) transition led to the compressive failure of the films. The strength and ductility of the films were influenced by temperature and compression strain rate.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2022)

添加到收藏夹

Article Engineering, Mechanical

Study of Diamond-Like Carbon coating application on carbide substrate for cutting tools used in the drilling process of an Al-Si alloy at high cutting speeds

Paulo Sergio Martins et al.

Summary: Aluminum alloys are widely used in various industries for their excellent mechanical properties. Adding silicon to the composition improves machinability and wear resistance. This study investigated the application of DLC coating on carbide tools and found that it enhanced wear resistance. The presence of DLC had minimal impact on the quality of holes during machining of aluminum alloy.

WEAR (2022)

添加到收藏夹

Article Chemistry, Physical

New evidences for understanding the serrated flow and shear band behavior in nanoindentation of metallic glasses

Hu Huang et al.

Summary: Nanoindentation experiments were conducted on a Zr-based metallic glass under various loading rates, revealing that increasing the loading rate weakened the size of serrated flow but kept the number stable, while maintaining similar shear band features around residual indents. These results challenge the previous understanding derived from experiments using the Berkovich indenter.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanoindentation of Amorphous Carbon: a combined experimental and simulation approach

Felipe J. Valencia et al.

Summary: This study investigates the mechanical response of non-hydrogenated DLC films with different sp3 concentrations using various experimental and simulation methods, revealing unexpected plastic deformation mechanisms. The research shows a good agreement between experiments and simulations, demonstrating an increase in elastic modulus and hardness of DLC films with higher sp3 content.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure evolution and wettability regulation of air-exposed hydrogen-free diamond-like carbon films

Keke Meng et al.

Summary: Regulation of surface wettability is essential for DLC coatings in various fields. This study deposited hydrogen-free DLC films with adjustable wettability on silicon substrates by controlling surface hybridized structures, revealing a non-monotonic relationship between surface wettability and hybridization states. The research provides a possible mechanism for fabricating high-performance DLC films with special surface wettability.

DIAMOND AND RELATED MATERIALS (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Evaluation of the surface fatigue behavior of amorphous carbon coatings through cyclic nanoindentation

Tim Weikert et al.

Summary: Diamond-like carbon coatings are commonly used to reduce wear and friction in machine components and forming tools, and doping with metals or metal carbides as well as using multilayer architectures can enhance toughness under cyclic loading. This study utilized cyclic nanoindentation to characterize the tribologically induced surface fatigue behavior of single-layer tungsten-doped and multilayer silicon oxide containing amorphous carbon coatings. The multilayer architecture showed superior resistance to plastic deformation and hindering crack initiation, contributing to favorable surface fatigue behavior in cyclic nanoindentation studies.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Chemical

Effect of Carbon Configuration on Mechanical, Friction and Wear Behavior of Nitrogen-Doped Diamond-Like Carbon Films for Magnetic Storage Applications

Ahmad Shakil et al.

Summary: The study found a close relationship between the friction, wear, and mechanical properties of NDLC films and their sp(2)/sp(3) carbon ratios. Lower carbon ratios resulted in better mechanical properties and higher wear resistance. NDLC films showed excellent robustness and durability at high temperatures.

TRIBOLOGY LETTERS (2021)

添加到收藏夹

Article Engineering, Mechanical

Crack-tip plasticity and intrinsic toughening in nano-sized brittle amorphous carbon

Dahye Shin et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

添加到收藏夹

Article Engineering, Mechanical

Dry friction and wear properties of several hard coating combinations

Yueying Zhu et al.

WEAR (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

A critical review of diamond like carbon coating for wear resistance applications

Ankit Tyagi et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)

添加到收藏夹

Article Materials Science, Coatings & Films

The influence of positive pulses on HiPIMS deposition of hard DLC coatings

J. A. Santiago et al.

SURFACE & COATINGS TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Physical

Influence of structure evolution on tribological properties of fluorine-containing diamond-like carbon films: From fullerene-like to amorphous structures

Jia Wang et al.

APPLIED SURFACE SCIENCE (2018)

添加到收藏夹

Article Physics, Applied

Nanoindentation data analysis of loading curve performed on DLC thin films: Effect of residual stress on the elasto-plastic properties

M. Ouchabane et al.

JOURNAL OF APPLIED PHYSICS (2017)

添加到收藏夹

Article Engineering, Mechanical

Tribochemical induced wear and ultra-low friction of superhard ta-C coatings

Stefan Makowski et al.

WEAR (2017)

添加到收藏夹

Article Materials Science, Coatings & Films

History of diamond-like carbon films - From first experiments to worldwide applications

Klaus Bewilogua et al.

SURFACE & COATINGS TECHNOLOGY (2014)

添加到收藏夹

Article Engineering, Chemical

Wear, Plasticity, and Rehybridization in Tetrahedral Amorphous Carbon

Tim Kunze et al.

TRIBOLOGY LETTERS (2014)

添加到收藏夹

Article Multidisciplinary Sciences

A shear localization mechanism for lubricity of amorphous carbon materials

Tian-Bao Ma et al.

SCIENTIFIC REPORTS (2014)

添加到收藏夹

Article Engineering, Mechanical

Diamond like carbon coatings for potential application in biological implants-a review

C. A. Love et al.

TRIBOLOGY INTERNATIONAL (2013)

添加到收藏夹

Article Physics, Applied

Superhard behaviour, low residual stress, and unique structure in diamond-like carbon films by simple bilayer approach

Neeraj Dwivedi et al.

JOURNAL OF APPLIED PHYSICS (2012)

添加到收藏夹

Article Materials Science, Coatings & Films

Hard nanocomposite coatings: Thermal stability, oxidation resistance and toughness

J. Musil

SURFACE & COATINGS TECHNOLOGY (2012)

添加到收藏夹

Review Materials Science, Multidisciplinary

Nanomechanical and nanotribological properties of carbon-based thin films: A review

C. A. Charitidis

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2010)

添加到收藏夹

Article Materials Science, Coatings & Films

Development of new technologies and practical applications of plasma immersion ion deposition (PIID)

Ronghua Wei

SURFACE & COATINGS TECHNOLOGY (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Superhard and tougher SiC/diamond-like-carbon composite films produced by electron beam physical vapour deposition

X. Zhao et al.

ACTA MATERIALIA (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhanced strain-rate sensitivity in fcc nanocrystals due to grain-boundary diffusion and sliding

Yujie Wei et al.

ACTA MATERIALIA (2008)

添加到收藏夹

Article Multidisciplinary Sciences

Experimental characterization of shear transformation zones for plastic flow of bulk metallic glasses

D. Pan et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Determining mechanical properties of thin films from the loading curve of nanoindentation testing

Manhong Zhao et al.

THIN SOLID FILMS (2008)

添加到收藏夹

Article Nanoscience & Nanotechnology

Observation of the failure mechanism for diamond-like carbon film on stainless steel under tensile loading

Hyun-Jong Kim et al.

SCRIPTA MATERIALIA (2007)

添加到收藏夹

Review Materials Science, Multidisciplinary

Overview No.144 - Mechanical behavior of amorphous alloys

Christopher A. Schuh et al.

ACTA MATERIALIA (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of film thickness and interlayer on the adhesion strength of diamond like carbon films on different substrates

Chehung Wei et al.

DIAMOND AND RELATED MATERIALS (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Indentation fracture toughness and acoustic energy release in tetrahedral amorphous carbon diamond-like thin films

J. M. Jungk et al.

ACTA MATERIALIA (2006)

添加到收藏夹

Article Physics, Applied

Strain rate sensitivity of a nanocrystalline Cu synthesized by electric brush plating

ZH Jiang et al.

APPLIED PHYSICS LETTERS (2006)

添加到收藏夹

Article Chemistry, Physical

First-principle study of nitrogen incorporation in amorphous carbon

B Zheng et al.

CARBON (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strain rate sensitivity of a nanocrystalline Cu-Ni-P alloy

J Chen et al.

JOURNAL OF MATERIALS RESEARCH (2005)

添加到收藏夹

Article Physics, Multidisciplinary

Formation of sp3 bonding in nanoindented carbon nanotubes and graphite -: art. no. 245502

WL Guo et al.

PHYSICAL REVIEW LETTERS (2004)

添加到收藏夹

Article Multidisciplinary Sciences

Raman spectroscopy of amorphous, nanostructured, diamond-like carbon, and nanodiamond

AC Ferrari et al.

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2004)

添加到收藏夹

Review Materials Science, Multidisciplinary

Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology

WC Oliver et al.

JOURNAL OF MATERIALS RESEARCH (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

The transition from localized to homogeneous plasticity during nanoindentation of an amorphous metal

CA Schuh et al.

PHILOSOPHICAL MAGAZINE (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Rate dependence of serrated flow in a metallic glass

WH Jiang et al.

JOURNAL OF MATERIALS RESEARCH (2003)

添加到收藏夹

Review Materials Science, Multidisciplinary

Diamond-like amorphous carbon

J Robertson

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ab initio generation of amorphous carbon structures

F Alvarez et al.

DIAMOND AND RELATED MATERIALS (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study of the mechanical properties of tetrahedral amorphous carbon films by nanoindentation and nanowear measurements

E Martínez et al.

DIAMOND AND RELATED MATERIALS (2001)

添加到收藏夹

Article Engineering, Mechanical

On the significance of the H/E ratio in wear control:: a nanocomposite coating approach to optimised tribological behaviour

A Leyland et al.

WEAR (2000)

添加到收藏夹

Article Materials Science, Multidisciplinary

Interpretation of Raman spectra of disordered and amorphous carbon

AC Ferrari et al.

PHYSICAL REVIEW B (2000)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ab initio simulations of the structure of amorphous carbon

DG McCulloch et al.

PHYSICAL REVIEW B (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.