☆ 4.7 Article

Development of new polymer composites formulated by glass as a potential protective coating for 3D printed H13 steel in acidic medium: DFT, MC and MD computational

JOURNAL OF MOLECULAR LIQUIDS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

A polyeugenol/graphene composite with excellent anti-corrosion coating properties

Nor Basid Adiwibawa Prasetya et al.

Summary: This study successfully applied a polyeugenol/graphene composite as a coating for metal corrosion protection. The graphene barrier properties significantly enhanced the corrosion resistance of metals, providing effective protection for the environment and the economy.

MATERIALS ADVANCES (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Anti-corrosion behavior of two N2O4 Schiff-base ligands: Experimental and theoretical studies

Hojat Jafari et al.

Summary: In this study, two novel green corrosion inhibitors were examined against steel corrosion in sulfuric acid using Monte Carlo (MC), Molecular Dynamic (MD) simulation, and electrochemical methods. The results showed that the inhibitors acted through adsorption on the steel surface, with M2 exhibiting better inhibition efficiency than M1.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2022)

添加到收藏夹

Article Chemistry, Physical

New epoxy resin as a corrosion inhibitor for the protection of carbon steel C38 in 1M HCl. experimental and theoretical studies (DFT, MC, and MD)

M. Damej et al.

Summary: In this study, a new organic compound epoxy resin (TTA) was synthesized and used as a corrosion inhibitor for carbon steel C38 in 1 M HCl acid medium. The corrosion inhibition process was investigated using experimental and theoretical calculations. The results showed that TTA acted as a mixed type inhibitor, and its inhibitory efficiency increased with concentration. Additionally, the adsorption of TTA on the carbon steel surface followed Langmuir's adsorption isotherm.

JOURNAL OF MOLECULAR STRUCTURE (2022)

添加到收藏夹

Review Engineering, Manufacturing

Porosity, cracks, and mechanical properties of additively manufactured tooling alloys: a review

Prveen Bidare et al.

Summary: Additive manufacturing technologies are gaining attention in high-technology industries due to their advantages in terms of low material waste and high productivity. Specifically in the tooling industry, AM enables the production of complex shapes, internal cooling channels, repair of damaged dies and molds, and improved performance using multiple materials.

ADVANCES IN MANUFACTURING (2022)

添加到收藏夹

Article Polymer Science

Synthesis Characterization and Highly Protective Efficiency of Tetraglycidyloxy Pentanal Epoxy Prepolymer as a Potential Corrosion Inhibitor for Mild Steel in 1 M HCl Medium

Rachid Hsissou et al.

Summary: This study evaluated the anticorrosive protection efficiency of a novel tetrafunctional epoxy prepolymer (TGP) for mild steel in 1M HCl. The TGP demonstrated a high inhibitory efficiency at lower concentrations and behaved as a mixed-type inhibitor in the solution. SEM and EDS analysis showed a significant decrease in corrosion on the mild steel surface in the presence of the inhibitory TGP prepolymer.

POLYMERS (2022)

添加到收藏夹

Article Chemistry, Physical

Performance of cross-linked polymers as a potential anticorrosive coating for low carbon steel in acidic condition: Experimental and computational studies

Rajesh Haldhar et al.

Summary: In this study, different cross-linked polymer materials were investigated for corrosion protection of low carbon steel. The corrosion inhibition behavior of these materials was evaluated using weight-loss, electrochemical analysis, and surface observation techniques. The results showed that the PEIL-ER3 coating material exhibited better corrosion inhibition performance.

JOURNAL OF MOLECULAR LIQUIDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Surface modification of hydroxyapatite with enzyme-catalyzed reaction: Computation-supported experimental studies

Merve Danisman et al.

Summary: Surface modification of particles using enzymes instead of chemicals can avoid limitations and energy loss, and is widely applied in various fields.

MATERIALS CHEMISTRY AND PHYSICS (2022)

添加到收藏夹

Article Polymer Science

Designing of phosphorous based highly functional dendrimeric macromolecular resin as an effective coating material for carbon steel inNaCl: Computational and experimental studies

Omar Dagdag et al.

Summary: This study aimed to develop a highly effective and durable phosphorus-based epoxy resin as an anticorrosive coating material for carbon steel in 3% NaCl medium. The synthesized HGTEDPA-MDA formulation showed improved corrosion resistance even after exposure to UV radiation for 189 days, as evaluated using electrochemical methods.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Green synthesis of novel carbohydrate polymer chitosan oligosaccharide grafted on D-glucose derivative as bio-based corrosion inhibitor

M. Rbaa et al.

Summary: A novel chitosan oligosaccharide macromolecule carrying a glucose moiety (COS-g-Glu) has been synthesized and proven effective as a non-toxic, durable, and biodegradable inhibitor of mild steel corrosion in acidic medium. Experimental results demonstrate that the corrosion inhibition efficiency of this macromolecule increases with the concentration of the inhibitor, reaching an optimum value of 97% at 10(-3) M.

JOURNAL OF MOLECULAR LIQUIDS (2021)

添加到收藏夹

Article Chemistry, Physical

Composite coatings with polymeric modified ZnO nanoparticles and nanocontainers with inhibitor for corrosion protection of low carbon steel

K. Kamburova et al.

Summary: Incorporation of zinc oxide nanoparticles and nanocontainers with corrosion inhibitor into standard zinc coatings improves corrosion protection for mild steel. Utilization of cationic polyelectrolyte to stabilize the nanoparticles, and layer-by-layer assembly of polymer coatings for encapsulation of inhibitor enhances the protective characteristics. The two-step electrodeposition method followed by characterization through dynamic and electric light scattering methods shows promising results for composite coatings in preserving particle functionality.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

添加到收藏夹

Article Chemistry, Physical

Performance of two new epoxy resins as potential corrosion inhibitors for carbon steel in 1MHCl medium: Combining experimental and computational approaches

Naoual El-Aouni et al.

Summary: The study investigates the application of two new epoxy resins as corrosion inhibitors for carbon steel in a hydrochloric acid medium. Various techniques were utilized to quantify the corrosion resistance and results showed that one of the resins had a higher efficiency compared to the other. Computational methods and molecular dynamics simulations revealed the inhibitory effect of the resins on the metal surface.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

添加到收藏夹

Article Chemistry, Physical

Salen type additives as corrosion mitigtor for Ni-W alloys: Detailed electronic/atomic-scale computational illustration

Pramod Kumar Uppalapati et al.

Summary: The study focused on understanding the competitive adsorption of salen-type Schiff bases OPD and PPD on the Ni-W alloy surface at a molecular level using DFT, MC, MD, and RDF analysis. Results indicated that PPD exhibited higher polarization, binding energy, interaction energy, and adsorption energy compared to OPD, suggesting that the spacer length plays a crucial role in the adsorption process. The findings from DFT global descriptors, MC, MD, and RDF analysis confirmed the higher corrosion efficiency of PPD compared to OPD on Ni-W alloys, validating the experimental results.

INTERNATIONAL JOURNAL OF QUANTUM CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Applied

Tailored polymer coatings as corrosion inhibitor for mild steel in acid medium

Ghada M. Abd El-Hafeez et al.

Summary: The electropolymerized poly(OBP-co-NMA) showed excellent passivation properties as a corrosion protection coating on a mild steel electrode in an acidic medium, with a physical adsorption of inhibitor molecules on the metallic surface.

JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2021)

添加到收藏夹

Article Chemistry, Physical

Electrochemical, thermodynamic and molecular dynamics studies of some benzoic acid derivatives on the corrosion inhibition of 316 stainless steel in HCl solutions

Mustapha Alahiane et al.

Summary: The study investigated the corrosion inhibition of benzoic acid derivatives on AISI 316 stainless steel in 0.5 M HCl solution. Results showed that increasing the concentration of inhibitors improved the inhibition efficiency, with C3 showing the best performance at 291 K. Molecular dynamics simulations indicated strong interactions between the organic compounds and Fe (110), suggesting good corrosion inhibition properties.

JOURNAL OF MOLECULAR LIQUIDS (2021)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Investigation of the anti-corrosion properties of Galactomannan as additive in epoxy coatings for carbon steel: Rheological and electrochemical study

Said Abbout et al.

Summary: The research focuses on improving the corrosion resistance of epoxy coating by studying the effects of adding Galactomannan polymer on carbon steel corrosion in an acidic medium. It is found that the addition of Galactomannan enhances the corrosion resistance of the coating, transitioning from Newtonian to non-Newtonian behavior with increasing concentration.

INORGANIC CHEMISTRY COMMUNICATIONS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hydrophobic Modification of Graphene Oxide and Its Effect on the Corrosion Resistance of Silicone-Modified Epoxy Resin

Wei Yuan et al.

Summary: The study successfully utilized hydrophilic octadecylamine (ODA)-modified graphene oxide (GO) in silicone-modified epoxy resin (SMER) coatings, significantly improving corrosion resistance through increased interfacial adhesion, lengthened diffusion path of corrosive solution, and increased cathodic peeling resistance.

METALS (2021)

添加到收藏夹

Article Chemistry, Physical

Insight into the corrosion inhibition of new bis-quinolin-8-ols derivatives as highly efficient inhibitors for C35E steel in 0.5 M H2SO4

M. El Faydy et al.

Summary: Two new bis-quinolin-8-ols were synthesized and evaluated for their corrosion inhibitory potency on C35E steel, with characterization techniques and computational methods confirming their protection properties. The results showed significant enhancement in corrosion resistance and high interaction activity with iron atoms, indicating improved performance of the steel.

JOURNAL OF MOLECULAR LIQUIDS (2021)

添加到收藏夹

Article Construction & Building Technology

Synthesis and anticorrosive properties of epoxy polymer for CS in [1 M] HCl solution: Electrochemical, AFM, DFT and MD simulations

Rachid Hsissou et al.

Summary: A novel EPT epoxy polymer was developed and investigated for its anticorrosive performance on carbon steel in [1 M] HCl medium. Experimental results showed high inhibitory efficiencies of EPT through chemical adsorption to resist acid attack, demonstrating its potential as an inhibitor for carbon steel. Computational approaches further supported these findings, indicating spontaneous adsorption and affirming the effectiveness of EPT.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Evaluation of Gloriosa superba seeds extract as corrosion inhibition for low carbon steel in sulfuric acidic medium: A combined experimental and computational studies

Rajesh Haldhar et al.

Summary: Experimental results showed that Gloriosa superba seed extract can form a protective layer on the surface of low carbon steel at certain concentrations, effectively reducing the corrosion process.

JOURNAL OF MOLECULAR LIQUIDS (2021)

添加到收藏夹

Article Chemistry, Physical

Influence of Selective Laser Melting Technology Process Parameters on Porosity and Hardness of AISI H13 Tool Steel: Statistical Approach

Filip Vele et al.

Summary: The study investigates the impact of SLM technology on the porosity and hardness of AISI H13 tool steel, identifying the minimum energy density required for a satisfactory density and hardness level, and proposing phenomenological models based on experimental data analysis.

MATERIALS (2021)

添加到收藏夹

Article Electrochemistry

Poly(sodium acrylate) and Poly(acrylic acid sodium) as an eco-friendly corrosion inhibitor of mild steel in normal hydrochloric acid: experimental, spectroscopic and theoretical approach

A. Ouass et al.

Summary: The study investigated the anticorrosive performance of PANa and PAA on mild steel in hydrochloric acid medium, revealing them to be mixed-type inhibitors and following Langmuir isotherm for adsorption. Mechanism of corrosion inhibition was studied using SEM and EDAX analysis.

JOURNAL OF APPLIED ELECTROCHEMISTRY (2021)

添加到收藏夹

Article Electrochemistry

Corrosion Inhibition Study of Mild Steel in an Aqueous Hydrochloric Acid Solution Using Brilliant Cresyl Blue - a Combined Experimental and Monte Carlo Study

Avni Berisha et al.

Summary: This study investigated the corrosion behavior of mild steel in a 0.5 M hydrochloric acid aqueous medium with and without Brilliant Cresyl Blue (BCB) dye, using potentiodynamic polarization measurements and Monte Carlo calculations. The results showed that BCB acts as a slightly anodic inhibitor and has adsorption ability onto a Fe(1 1 0) surface at the molecular level. The experimental and theoretical results provided crucial support for understanding the corrosion inhibition mechanism of this molecule.

PORTUGALIAE ELECTROCHIMICA ACTA (2021)

添加到收藏夹

Article Polymer Science

DGEBA-polyaminoamide as effective anti-corrosive material for 15CDV6 steel in NaCl medium: Computational and experimental studies

Omar Dagdag et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

添加到收藏夹

Article Polymer Science

Anticorrosive property of hexafunctional epoxy polymer HGTMDAE for E24 carbon steel corrosion in 1.0 M HCl: gravimetric, electrochemical, surface morphology and molecular dynamic simulations

Rachid Hsissou et al.

POLYMER BULLETIN (2020)

添加到收藏夹

Review Nanoscience & Nanotechnology

Steels in additive manufacturing: A review of their microstructure and properties

P. Bajaj et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Engineering, Chemical

Corrosion inhibition effect of a benzimidazole derivative on heat exchanger tubing materials during acid cleaning of multistage flash desalination plants

Ikenna B. Onyeachu et al.

DESALINATION (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evaluation of corrosion inhibition performance of phosphorus polymer for carbon steel in [1 M] HCl: Computational studies (DFT, MC and MD simulations)

Rachid Hsissou et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Automation & Control Systems

Parameter optimization of the high-power laser powder bed fusion process for H13 tool steel

Makiko Yonehara et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

New Epoxy sugar based glucose derivatives as eco friendly corrosion inhibitors for the carbon steel in 1.0 M HCl: Experimental and theoretical investigations

M. Rbaa et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Chemistry, Physical

Selective laser melting and tempering of H13 tool steel for rapid tooling applications

Michael Katancik et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Chemistry, Physical

Preparation, characterization, and evaluation of corrosion inhibition efficiency of sodium lauryl sulfate modified chitosan for mild steel in the acid pickling process

S. J. Hepziba Magie Jessima et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Galactomannan as a new bio-sourced corrosion inhibitor for iron in acidic media

Said Abbout et al.

HELIYON (2020)

添加到收藏夹

Article Chemistry, Physical

Fabrication of polymer based epoxy resin as effective anti-corrosive coating for steel: Computational modeling reinforced experimental studies

O. Dagdag et al.

SURFACES AND INTERFACES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation and mechanical properties of selective laser melted H13 steel

Bo Ren et al.

JOURNAL OF MATERIALS RESEARCH (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Interactions between the Aryldiazonium Cations and Graphene Oxide: A DFT Study

Avni Berisha

JOURNAL OF CHEMISTRY (2019)

添加到收藏夹

Article Chemistry, Physical

Novel derivative epoxy resin TGETET as a corrosion inhibition of E24 carbon steel in 1.0 M HCl solution. Experimental and computational (DFT and MD simulations) methods

Rachid Hsissou et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

添加到收藏夹

Article Chemistry, Physical

Structures and relative stabilities of Na+Nen (n=1-16) clusters via pairwise and DFT calculations

Mouna Ben Hadj Ayed et al.

THEORETICAL CHEMISTRY ACCOUNTS (2019)

添加到收藏夹

Article Chemistry, Physical

Process-Structure-Property Relationships of AISI H13 Tool Steel Processed with Selective Laser Melting

Morteza Narvan et al.

MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

The influence of the grafted aryl groups on the solvation properties of the graphyne and graphdiyne - a MD study

Avni Berisha

OPEN CHEMISTRY (2019)

添加到收藏夹

Article Chemistry, Applied

Improved adhesion, heat resistance, anticorrosion properties of epoxy resins/POSS/methyl phenyl silicone coatings

Gang Xiong et al.

PROGRESS IN ORGANIC COATINGS (2019)

添加到收藏夹

Article Chemistry, Physical

Evaluating Charge Equilibration Methods To Generate Electrostatic Fields in Nanoporous Materials

Daniele Ongari et al.

JOURNAL OF CHEMICAL THEORY AND COMPUTATION (2019)

添加到收藏夹

Article Chemistry, Physical

Effect of Scanning and Support Strategies on Relative Density of SLM-ed H13 Steel in Relation to Specimen Size

Tomasz Kurzynowski et al.

MATERIALS (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

The COSMO and COSMO-RS solvation models

Andreas Klamt

WILEY INTERDISCIPLINARY REVIEWS-COMPUTATIONAL MOLECULAR SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion Behavior of 316L Stainless Steel Fabricated by Selective Laser Melting Under Different Scanning Speeds

Xiaoqing Ni et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)

添加到收藏夹

Article Electrochemistry

Theoretical and Electrochemical Studies of the Coating Behavior of a New Epoxy Polymer: Hexaglycidyl Ethylene of Methylene Dianiline (HGEMDA) on E24 Steel in 3.5% NaCl

Rachid Hsissou et al.

PORTUGALIAE ELECTROCHIMICA ACTA (2018)

添加到收藏夹

Article Automation & Control Systems

Numerical and experimental evaluation of a conformally cooled H13 steel injection mould manufactured with selective laser melting

Maciej Mazur et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Toward understanding the adsorption mechanism of large size organic corrosion inhibitors on an Fe(110) surface using the DFTB method

Lei Guo et al.

RSC ADVANCES (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Corrosion Study of Mild Steel in Aqueous Sulfuric Acid Solution Using 4-Methyl-4H-1,2,4-Triazole-3-Thiol and 2-Mercaptonicotinic Acid-An Experimental and Theoretical Study

Valbone V. Mehmeti et al.

FRONTIERS IN CHEMISTRY (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Carboxymethyl Cellulose/Silver Nanoparticles Composite: Synthesis, Characterization and Application as a Benign Corrosion Inhibitor for St37 Steel in 15% H2SO4 Medium

Moses M. Solomon et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Engineering, Mechanical

SLM additive manufacture of H13 tool steel with conformal cooling and structural lattices

Maciej Mazur et al.

RAPID PROTOTYPING JOURNAL (2016)

添加到收藏夹

Proceedings Paper Engineering, Manufacturing

Optimization and simulation of SLM process for high density H13 tool steel parts

Petri Laasko et al.

LASER ASSISTED NET SHAPE ENGINEERING 9 INTERNATIONAL CONFERENCE ON PHOTONIC TECHNOLOGIES PROCEEDINGS OF THE LANE 2016 (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

THEORETICAL AND EXPERIMENTAL STUDIES OF THE CORROSION BEHAVIOR OF SOME THIAZOLE DERIVATIVES TOWARD MILD STEEL IN SULFURIC ACID MEDIA

Avni Berisha et al.

MACEDONIAN JOURNAL OF CHEMISTRY AND CHEMICAL ENGINEERING (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural Characterization and Mechanical Performance of Hot Work Tool Steel Processed by Selective Laser Melting

Martin Joachim Holzweissig et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2015)

添加到收藏夹

Article Engineering, Mechanical

Towards a sustainable and economic selection of part candidates for additive manufacturing

Christian Lindemann et al.

RAPID PROTOTYPING JOURNAL (2015)

添加到收藏夹

Review Physics, Applied

Review of selective laser melting: Materials and applications

C. Y. Yap et al.

APPLIED PHYSICS REVIEWS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental and computational studies of two antibacterial drugs as corrosion inhibitors for mild steel in acid media

L. Guo et al.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2014)

添加到收藏夹

Article Engineering, Mechanical

Selective laser melting of biocompatible metals for rapid manufacturing of medical parts

Ben Vandenbroucke et al.

RAPID PROTOTYPING JOURNAL (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.