☆ 4.7 Article

Toxic cadmium(II) monitoring and removal from aqueous solution using ligand-based facial composite adsorbent

JOURNAL OF MOLECULAR LIQUIDS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Sustainable ligand-modified based composite material for the selective and effective cadmium(II) capturing from wastewater

Md. Munjur Hasan et al.

Summary: The chemical ligand BSBAE was embedded indirectly on mesoporous silica to fabricate optical composite materials (OCM) for detecting and removing toxic cadmium (Cd(II)) ions from wastewater solutions. The OCM demonstrated high sensitivity and selectivity towards Cd(II) ions in acidic pH conditions (pH 3.50) and showed distinguishable color changes upon the addition of trace levels of Cd(II) ions. Other metal ions did not significantly affect the performance of the OCM, which had a detection limit of 0.32 μg/L and a maximum adsorption capacity of 179.65 mg/g for Cd(II) ions. Cd(II) ions could be successfully desorbed from the saturated OCM using 0.25 M HCl, and the regenerated OCM maintained its selectivity and adsorption capacity. However, the adsorption efficiency slightly decreased after multiple cycles. Therefore, the OCM offers a cost-effective and viable alternative for detecting and removing toxic Cd(II) ions from wastewater.

JOURNAL OF MOLECULAR LIQUIDS (2023)

添加到收藏夹

Article Chemistry, Physical

Efficient toxic doxorubicin hydrochloride removal from aqueous solutions using facial alumina nanorods

Ghaferah H. Al-Hazmi et al.

Summary: A simple synthesis method was used to prepare mesoporous alumina nanorods, which exhibited a high adsorption capacity for the anti-cancer medication DOX. The adsorption behavior of DOX on the alumina nanorods was evaluated under different conditions, and the Langmuir adsorption model was found to fit the data well. The adsorption kinetics followed a pseudo-second-order model, and the adsorption process was endothermic and spontaneous. The alumina nanorods also showed good adsorption performance for DOX in real water samples and could be used for wastewater treatment.

JOURNAL OF MOLECULAR STRUCTURE (2023)

添加到收藏夹

Article Chemistry, Physical

Chitosan-coated cotton fiber composite for efficient toxic dye encapsulation from aqueous media

Md. Shad Salman et al.

Summary: This study focuses on the use of chitosan-treated cotton composite material for the removal of toxic dyes in contaminated water. The results reveal that the chitosan-cotton composite has a high adsorption capacity and can efficiently remove dyes, achieving a decolorization effect.

APPLIED SURFACE SCIENCE (2023)

添加到收藏夹

Article Chemistry, Physical

The heavy lanthanide of Thulium(III) separation and recovery using specific ligand-based facial composite adsorbent

Khadiza Tul Kubra et al.

Summary: The synthesis of the organic ligand EBMS and its immobilization onto mesoporous silica led to the successful fabrication of a composite adsorbent (FCA) for the separation, adsorption, and recovery of Tm(III) ions. The FCA displayed high kinetic performance and was unaffected by competing metal ions. The adsorption behavior of Tm(III) ions on FCA followed the Langmuir adsorption isotherm model with a maximum adsorption capacity of 168.57 mg/g. The FCA showed strong selectivity and potential for the effective separation and recovery of Tm(III) ions from waste samples.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2023)

添加到收藏夹

Article Chemistry, Applied

Vortex-assisted dispersive solid-phase microextraction of cadmium and copper on magnetic polystyrene-b- poly dimethyl siloxane hydrophobic block copolymer for their atomic absorption spectrometric determination in water, soft drink and food samples

Sefa Yilmaz et al.

Summary: The goal of this study was to develop an efficient method to extract and pre-concentrate copper and cadmium from food, soft drink, and water samples using Vortex Assisted Dispersive Solid Phase Microextraction (VAdSP-μE) with a magnetic polystyrene-b-poly dimethyl siloxane block copolymer (MPCP). The optimized conditions resulted in a linear range of 2.5-140 μg L-1 and 5.1-100 μg L-1, LOD of 0.8 and 1.7 μg L-1, RSD of 1.1% and 0.7%, and enhancement factors of 50 for Cu and Cd, respectively.

JOURNAL OF FOOD COMPOSITION AND ANALYSIS (2023)

添加到收藏夹

Article Chemistry, Physical

Succinylated Salvia spinosa hydrogel: Modification, characterization, cadmium-uptake from spiked high-hardness groundwater and statistical analysis of sorption data

Arshad Ali et al.

Summary: This study synthesized a novel and green polysaccharide-based ion-exchanger, sodium salt of succinylated Salvia spinosa hydrogel (NaS-SSH), for the removal of cadmium ions from deionized water and spiked high-hard ground water. The NaS-SSH exhibited a pHZPC of 4.77 ± 0.35 and a sorption capacity of 344.83 mg/g (DW) and 312.5 mg/g (HGW) for cadmium ions.

JOURNAL OF MOLECULAR LIQUIDS (2023)

添加到收藏夹

Article Chemistry, Physical

Improving copper(II) ion detection and adsorption from wastewater by the ligand-functionalized composite adsorbent

Md. Shad Salman et al.

Summary: In this study, a functional organic ligand, 4-tert-Octyl-4-((phenyl)diazenyl)phenol (TPDP), was directly immobilized onto mesoporous silica to fabricate a composite adsorbent for the detection and removal of toxic copper (Cu(II)) ions from contaminated water. The composite adsorbent showed high sensitivity and selectivity towards Cu(II) ions, with a limit of detection of 0.28 μg/L. The adsorbent exhibited a high adsorption capacity, with a maximum adsorption capacity of 184.73 mg/g. The Cu(II) ions could be eluted and the adsorbent could be regenerated for reuse. This ligand-based composite adsorbent offers a low-cost and efficient method for the detection and removal of Cu(II) ions in real waste sample treatment.

JOURNAL OF MOLECULAR STRUCTURE (2023)

添加到收藏夹

Article Chemistry, Physical

Assessing sustainable Lutetium(III) ions adsorption and recovery using novel composite hybrid nanomaterials

Md Nazmul Hasan et al.

Summary: Organic ligand-based sustainable composite hybrid material (CMHs) was synthesized for the sensitive and selective adsorption of Lu(III) from waste samples. The adsorption of Lu(III) was influenced by solution pH, with slightly acidic conditions chosen for optimal separation and adsorption. Other metal ions did not interfere with Lu(III) adsorption due to the high affinity of Lu(III) to CMHs. The CMHs exhibited a high adsorption capacity and the adsorbed Lu(III) ions were easily eluted for regeneration.

JOURNAL OF MOLECULAR STRUCTURE (2023)

添加到收藏夹

Review Chemistry, Analytical

Colorimetric sensing of heavy metals on metal doped metal oxide nanocomposites: A review

Zainab Ali et al.

Summary: Heavy metal ion-containing pollution is a serious concern due to its risks to human and environmental health. Nanotechnologies, with their ability to control and measure objects at the nanoscale, particularly nanocomposites, have proven to be effective platforms for detecting heavy metal contamination. The development of sensitive and selective sensors is crucial for monitoring and cleaning up contaminated water.

TRENDS IN ENVIRONMENTAL ANALYTICAL CHEMISTRY (2023)

添加到收藏夹

Article Engineering, Chemical

Synthesis of TiO2 nanoparticles loaded on magnetite nanoparticles modified kaolinite clay (KC) and their efficiency for As(III) adsorption

Imran Khan Rind et al.

Summary: Arsenic pollution is a global environmental issue. In this study, a new adsorbent, KC/TiO2Fe3O4, was synthesized for effective adsorption of As(III) from water. The optimal batch experimental parameters were determined using factorial design method, and validated by response surface methodology (RSM) analysis. The adsorption capacity of the developed composite was 462.0 mg g-1 at optimized conditions, pH 5, sorbent dose (300 mg L-1), initial As(III) concentration (10 mg L-1), and contact time (40 min). The composite showed promising adsorption performance with high stability, reusability, and cost-effectiveness.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2023)

添加到收藏夹

Article Chemistry, Physical

Equilibrium, thermodynamic and kinetic modeling of triclosan adsorption on mesoporous carbon nanosphere: Optimization using Box-Behnken design

Ahmed Shahat et al.

Summary: A high-potential nanoadsorbent was synthesized and characterized for its efficiency in adsorbing triclosan (TCS) from aqueous solutions. The adsorption equilibrium was found to be influenced by the pH of the solution. The adsorption process followed a chemisorption technique, as evidenced by fitting the adsorption isotherm models to a Langmuir model. The synthesized MCNS adsorbent showed remarkable reusability and renderability, making it suitable for water filtration and industrial wastewater treatment.

JOURNAL OF MOLECULAR LIQUIDS (2023)

添加到收藏夹

Article Chemistry, Physical

Optimization of toxic dye removal from contaminated water using chitosan-grafted novel nanocomposite adsorbent

R. M. Waliullah et al.

Summary: In this study, chitosan-treated nanocomposite was used as an effective adsorbent to remove methyl orange dye from contaminated water. The introduction of chitosan improved the adsorption capacity and rate effectively, and the nanocomposite adsorbent exhibited high reusability. Therefore, chitosan-based fibrous nanocomposite adsorbent is expected to become one of the best candidate materials for future industrial wastewater treatment.

JOURNAL OF MOLECULAR LIQUIDS (2023)

添加到收藏夹

Article Chemistry, Physical

Facial conjugate adsorbent for sustainable Pb(II) ion monitoring and removal from contaminated water

Md. Munjur Hasan et al.

Summary: In order to protect water quality and human health, a chemical ligand-based conjugate adsorbent was prepared for the selective and sensitive monitoring and removal of toxic lead (Pb(II)) ions from contaminated water. The solution pH played a vital role in both monitoring and removal operations, and pH 3.50 was found to be suitable for simultaneous monitoring and removal of Pb(II) ions.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2023)

添加到收藏夹

Article Chemistry, Physical

Improving toxic dye removal and remediation using novel nanocomposite fibrous adsorbent

Ariyan Islam Rehan et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2023)

添加到收藏夹

Article Materials Science, Coatings & Films

Efficient separation, adsorption, and recovery of Samarium(III) ions using novel ligand-based composite adsorbent

Adiba Islam Rasee et al.

Surfaces and Interfaces (2023)

添加到收藏夹

Review Green & Sustainable Science & Technology

Sustainable toxic dyes removal with advanced materials for clean water production: A comprehensive review

Siow Hwa Teo et al.

Summary: Textile dye is a significant water pollutant worldwide, especially in developing countries where dumping textile effluent is common. Recycling wastewater is an important option to reduce environmental pollution, and adsorption is a promising method for treating dye-contaminated water. This review critically assesses various adsorbents for dye removal, focusing on efficient adsorbents and cutting-edge processes.

JOURNAL OF CLEANER PRODUCTION (2022)

添加到收藏夹

Article Chemistry, Physical

Enhanced toxic dye removal from wastewater using biodegradable polymeric natural adsorbent

Khadiza Tul Kubra et al.

Summary: The study investigated the encapsulation of toxic cationic dye methylene blue (MB) by polymeric natural carbohydrate turmeric powder (TP) adsorbent. The research optimized the MB dye adsorption system and quantified the contributions of adsorption and complexation on MB dye removal by TP adsorbent. The study found that TP adsorbent showed favorable dye capturing ability in neutral pH conditions and could be used for efficient removal of organic dyes from water samples to maintain water quality.

JOURNAL OF MOLECULAR LIQUIDS (2021)

添加到收藏夹

Article Chemistry, Analytical

Novel solid-state sensor material for efficient cadmium(II) detection and capturing from wastewater

Ahmed Shahat et al.

Summary: In this study, a solid-state sensor for simultaneous detection and adsorption of cadmium ion was successfully fabricated. The sensor exhibited high selectivity and reusability, with the ability to detect ultra-trace levels of Cd(II) ion and a suitable pH of 7.0. The sensor showed a good adsorption capacity and was able to be reused after desorption using HCl without significant loss in performance.

MICROCHEMICAL JOURNAL (2021)

添加到收藏夹

Article Chemistry, Analytical

Optimization of innovative composite sensor for Pb(II) detection and capturing from water samples

Md Shad Salman et al.

Summary: In developing countries, the lack of analytical infrastructures hinders regular water quality assessments. Affordable and portable analytical technologies are needed for real-time monitoring, and the developed sensor material offers specific detection and removal of toxic lead ions in water, with potential for widespread use in heavy metal pollution monitoring.

MICROCHEMICAL JOURNAL (2021)

添加到收藏夹

Article Chemistry, Applied

A new analytical approach for preconcentration, separation and determination of Pb(II) and Cd(II) in real samples using a new adsorbent: Synthesis, characterization and application

Nail Altunay et al.

Summary: A green and efficient analytical method using PHBvbNCl for simultaneous preconcentration and separation of Pb(II) and Cd(II) was reported. The method showed high adsorption capacity and analytical performance, successfully applied to real samples after optimization.

FOOD CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Analytical

Optical detection and recovery of Yb(III) from waste sample using novel sensor ensemble nanomaterials

Md Shad Salman et al.

Summary: This study successfully prepared a novel organic ligand-based optical sensor material for detection, adsorption and recovery of Yb(III) ions, with a clear understanding of its performance under optimal experimental conditions.

MICROCHEMICAL JOURNAL (2021)

添加到收藏夹

Article Chemistry, Analytical

Sustainable composite sensor material for optical cadmium(II) monitoring and capturing from wastewater

Md Nazmul Hasan et al.

Summary: The study developed an optical sensor material for sustainable detection and adsorption of cadmium (Cd (II)) ions in aqueous solution, exhibiting enhanced sensitivity and distinct color response. The sensor showed efficient immobilization of organic ligands for selective capturing of Cd (II) ions even in the presence of coexisting metal ions, with good stability and reusability for various adsorptive removal and detection applications.

MICROCHEMICAL JOURNAL (2021)

添加到收藏夹

Article Chemistry, Physical

Efficient encapsulation of toxic dye from wastewater using biodegradable polymeric adsorbent

Khadiza Tul Kubra et al.

Summary: The study demonstrates that using whole wheat flour as an adsorbent can effectively remove dyes from wastewater, with a maximum adsorption capacity as high as 162.33 mg/g. The effective pH range for CyV adsorption is in the neutral pH region, and the whole wheat flour adsorbent can selectively remove CyV dye even in the presence of various competing ions.

JOURNAL OF MOLECULAR LIQUIDS (2021)

添加到收藏夹

Article Chemistry, Physical

Performance assessment of five adsorbents based on fly ash for removal of cadmium ions

Gabriela Buema et al.

Summary: The study investigated five adsorbents based on NaOH-treated fly ash for the adsorption of cadmium ions from aqueous solutions. Results showed that the adsorption capacity of the new adsorbents improved significantly after NaOH treatment, with shorter equilibrium time. The adsorption process followed the pseudo second-order model, and the effectiveness of the adsorbents was evaluated using the TCLP procedure, recommending their potential use for wastewater treatment.

JOURNAL OF MOLECULAR LIQUIDS (2021)

添加到收藏夹

Article Chemistry, Applied

Synthesis and Characterization of Porous Magnetite Nanosphere Iron Oxide as a Novel Adsorbent of Anionic Dyes Removal from Aqueous Solution

Mohamed G. El-Desouky et al.

Summary: Porous magnetite Fe3O4 nanospheres were successfully synthesized as a high-performance adsorbent for removing anionic dyes from aqueous solutions. Characterization and analysis of PMNs were performed to determine optimal adsorption conditions and mechanisms.

BIOINTERFACE RESEARCH IN APPLIED CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Physical

Performance improvement of dye sensitized solar cells based on cadmium sulfide/S, N co doped carbon dots nanocomposites

Hossein Safardoust-Hojaghan et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

添加到收藏夹

Article Chemistry, Physical

The synergistic effect of ultrasound power and magnetite incorporation on the sorption/desorption behavior of Cr(VI) and As(V) oxoanions in an aqueous system

Khalid Z. Elwakeel et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Experimental andmodeling of cadmiumions removal by chelating resins

Claudia Maria Simonescu et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

添加到收藏夹

Article Chemistry, Physical

Performance evaluation of a novel rGO-Fe0/Fe3O4-PEI nanocomposite for lead and cadmium removal from aqueous solutions

Susan Bagheri et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

添加到收藏夹

Article Engineering, Environmental

Highly efficient removal of nickel and cadmium from water using sawdust-derived cellulose nanocrystals

Opeyemi A. Oyewo et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2019)

添加到收藏夹

Article Chemistry, Applied

A highly selective and sensitive ultrasonic assisted dispersive liquid phase microextraction based on deep eutectic solvent for determination of cadmium in food and water samples prior to electrothermal atomic absorption spectrometry

Rizwan Ali Zounr et al.

FOOD CHEMISTRY (2018)

添加到收藏夹

Article Engineering, Environmental

Zeolite-supported nanoscale zero-valent iron: New findings on simultaneous adsorption of Cd(II), Pb(II), and As(III) in aqueous solution and soil

Zhangtao Li et al.

JOURNAL OF HAZARDOUS MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Removal of cadmium and lead ions from water by sulfonated magnetic nanoparticle adsorbents

Kai Chen et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2017)

添加到收藏夹

Article Chemistry, Physical

Carbon nanotubes as sorbent material for removal of cadmium

Gaurav Bhanjana et al.

JOURNAL OF MOLECULAR LIQUIDS (2017)

添加到收藏夹

Article Chemistry, Analytical

Optical recognition and removal of Hg(II) using a new self-chemosensor based on a modified amino-functionalized Al-MOF

Ahmed Shahat et al.

SENSORS AND ACTUATORS B-CHEMICAL (2017)

添加到收藏夹

Article Chemistry, Analytical

Sensitive, selective, and rapid method for optical recognition of ultra-traces level of Hg(II), Ag(I), Au(III), and Pd(II) in electronic wastes

Ahmed Shahat et al.

SENSORS AND ACTUATORS B-CHEMICAL (2017)

添加到收藏夹

Article Engineering, Environmental

Novel imprinted polymeric nanoparticles prepared by sol-gel technique for electrochemical detection of toxic cadmium(II) ions

M. Ghanei-Motlagh et al.

CHEMICAL ENGINEERING JOURNAL (2017)

添加到收藏夹

Article Engineering, Environmental

Enhanced adsorption of cadmium ions by 3D sulfonated reduced graphene oxide

Shibiao Wu et al.

CHEMICAL ENGINEERING JOURNAL (2015)

添加到收藏夹

Article Engineering, Environmental

Sponge-like polysiloxane-graphene oxide gel as a highly efficient and renewable adsorbent for lead and cadmium metals removal from wastewater

Guiyin Zhou et al.

CHEMICAL ENGINEERING JOURNAL (2015)

添加到收藏夹

Article Chemistry, Analytical

Colorimetric determination of some toxic metal ions in post-mortem biological samples

Ahmed Shahat et al.

SENSORS AND ACTUATORS B-CHEMICAL (2015)

添加到收藏夹

Article Chemistry, Analytical

Facile fabrication of cauliflower-like MIL-100(Cr) and its simultaneous determination of Cd2+, Pb2+, Cu2+ and He2+ from aqueous solution

Dongfang Wang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2015)

添加到收藏夹

Article Engineering, Environmental

Simple and facile synthesis of amino functionalized hollow core-mesoporous shell silica spheres using anionic surfactant for Pb(II), Cd(II), and Zn(II) adsorption and recovery

Ahmed Mohamed El-Toni et al.

CHEMICAL ENGINEERING JOURNAL (2014)

添加到收藏夹

Article Environmental Sciences

Sericite in the remediation of Cd(II)- and Mn(II)-contaminated waters: batch and column studies

Seung Mok Lee et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Separation and determination of cadmium in water by foam column prior to inductively coupled plasma optical emission spectrometry

M. S. El-Shahawi et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2014)

添加到收藏夹

Article Engineering, Environmental

Adsorption behavior of MnO2 functionalized multi-walled carbon nanotubes for the removal of cadmium from aqueous solutions

Chao Luo et al.

CHEMICAL ENGINEERING JOURNAL (2013)

添加到收藏夹

Article Engineering, Environmental

Architecture of optical sensor for recognition of multiple toxic metal ions from water

M. A. Shenashen et al.

JOURNAL OF HAZARDOUS MATERIALS (2013)

添加到收藏夹

Article Chemistry, Analytical

Selective fluorimetric detection of cadmium in a microfluidic device

Haitao Zhang et al.

MICROCHEMICAL JOURNAL (2013)

添加到收藏夹

Article Engineering, Biomedical

Optical Nanosphere Sensor Based on Shell-By-Shell Fabrication for Removal of Toxic Metals from Human Blood

S. A. El-Safty et al.

ADVANCED HEALTHCARE MATERIALS (2013)

添加到收藏夹

Article Engineering, Environmental

Mesoporous aluminosilica monoliths for the adsorptive removal of small organic pollutants

Sherif A. El-Safty et al.

JOURNAL OF HAZARDOUS MATERIALS (2012)

添加到收藏夹

Article Chemistry, Analytical

Optical supermicrosensor responses for simple recognition and sensitive removal of Cu (II) Ion target

Sherif A. El-Safty et al.

TALANTA (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.