☆ 4.7 Article

Efficient and stable proton conduction achieved by accommodation of the membrane-wide cross-linking and branching strategies

JOURNAL OF MEMBRANE SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Polymeric ionic liquids and MXene synergistically improve proton conductivity and mechanical properties of polybenzimidazole-based high-temperature proton exchange membranes

Di Yu et al.

Summary: A series of Polymeric ionic liquids (PILs) cross-linked amino polybenzimidazoles with MXene fillers were prepared successfully. The synergistic effect of anion replacement and the hydroxide on the surface of MXene enabled the membrane to have high proton conductivity and low phosphoric acid absorption. The mechanical performance was greatly improved through covalent cross-linking and interaction between oxygen-containing groups and imidazole. The membrane exhibited excellent stability, with no voltage loss after 100 h test.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2023)

添加到收藏夹

Article Horticulture

Effects of nitrogen application level on the physiological characteristics, yield and fruit quality of blackberry

Yuan Yang et al.

Summary: This study investigated the optimal amount of nitrogen application for blackberry plants and its effects on the physiological characteristics, yield, and fruit quality. The results showed that different amounts of ammonium sulfate applied at different growth stages significantly affected the leaf physiology and fruit characteristics. Leaf chlorophyll content, photosynthesis efficiency, and antioxidant enzyme activity were higher in the treatments with 40 g and 60 g of nitrogen per plant compared to the treatments with 20 g and 80 g of nitrogen per plant. Fruit yield, weight, solids-acids ratio, and anthocyanin content increased initially and then decreased with nitrogen application. Polyphenol and ellagic acid contents decreased with increasing nitrogen application. The study concluded that applying 20 g of ammonium sulfate per plant at key growth stages resulted in improved growth, increased yield and fruit quality, and cost-effective production.

SCIENTIA HORTICULTURAE (2023)

添加到收藏夹

Article Engineering, Chemical

Stable branched polybenzimidazole high temperature proton exchange membrane: Crosslinking and pentaphosphonic-acid doping lower fuel permeability and enhanced proton transport

Hui Guo et al.

Summary: By crosslinking and doping strategies, the performance of branched polybenzimidazole derivatives in high temperature proton exchange membranes (HTPEMs) is effectively improved. The prepared tqPBI-dBPEI/CePMP membranes exhibit excellent mechanical properties, chemical stability, and dimensional stability, with significantly lower permeability for gas and liquid phase fuel compared to Nafion membranes.

JOURNAL OF MEMBRANE SCIENCE (2022)

添加到收藏夹

Article Engineering, Chemical

New high-performance bulky N-heterocyclic group functionalized poly (terphenyl piperidinium) membranes for HT-PEMFC applications

Yaping Jin et al.

Summary: A novel high-performance high-temperature proton exchange membrane has been developed with high phosphoric acid doping content and conductivity, achieving good performance in fuel cells.

JOURNAL OF MEMBRANE SCIENCE (2022)

添加到收藏夹

Article Engineering, Chemical

Constructing novel cross-linked polybenzimidazole network for high-performance high-temperature proton exchange membrane

Jinwu Peng et al.

Summary: Compared to linear polybenzimidazole (PBI) membranes, cross-linked phosphoric acid (PA)-PBI membranes offer greater potential for high-temperature proton exchange membrane fuel cells (HT-PEMFCs) due to their superior mechanical strength. However, the challenge lies in achieving high-performance cross-linked PA-PBI membranes, which is addressed in this study by covalently cross-linking PBI using 2,6-bis(hydroxymethyl)-4-methyl-phenol (BHMP) as a cross-linking agent. The optimized covalently cross-linked network shows high proton conductivity and excellent fuel cell performance, making it a promising candidate for HT-PEMFC applications.

JOURNAL OF MEMBRANE SCIENCE (2022)

添加到收藏夹

Article Engineering, Chemical

Highly conductive quaternary ammonium-containing cross-linked poly (vinyl pyrrolidone) for high-temperature PEM fuel cells with high-performance

Huijuan Bai et al.

Summary: The use of polymeric crosslinker improves mechanical properties and proton conductivity of high-temperature polymer electrolyte membranes. The quaternary amine groups introduced by crosslinking enhance phosphoric acid adsorption and retention capacity, while the increased molar free volume accommodates more phosphoric acid storage and reduces polymer main chain plasticization.

JOURNAL OF MEMBRANE SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Poly(arylene pyridine)s: New alternative materials for high temperature polymer electrolyte fuel cells

Yaping Jin et al.

Summary: This study successfully synthesized two new types of polymer exchange membranes with good organic solubility, excellent thermal stability, and phosphoric acid absorption capability through a simple Friedel-Crafts polymerization method. The membranes also exhibit remarkable chemical stability. The fuel cell based on the PTAP membrane demonstrates excellent performance and durability.

JOURNAL OF POWER SOURCES (2022)

添加到收藏夹

Article Chemistry, Physical

Bifunctional Acid Proton Conductor Doping to Improve the Comprehensive Properties of a Cross-Linked Polybenzimidazole High-Temperature Proton Exchange Membrane

Ping Li et al.

Summary: The study focuses on improving the comprehensive properties of high-temperature proton exchange membranes (HTPEM) under wide relative humidity. A new composite membrane is developed with suitable functional groups for proton transfer at high and low humidity, resulting in improved film-forming property, mechanical strength, oxidative stability, and proton conductivity.

ACS APPLIED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Metal tri-phosphonates containing aliphatic tertiary amines for medium-temperature proton conduction

Zihan Xia et al.

Summary: New medium-temperature proton conductors (MATMP) were synthesized using amino trimethylene phosphonic acid (ATMP) and metal ions (Fe2+, Ce4+, and Zr4+) at different molar ratios. The high phosphonic acid content in ATMP provided MATMP with good ion exchange capacity and proton conductivity. The proton conductivity of FeATMP(1:2) reached 0.124, 0.079, and 0.038 S cm(-1) at 100%, 50%, and 0 RH at 180 degrees C, respectively. MATMP exhibited excellent thermal and oxidative stability, making it promising for fuel cell technology.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Engineering, Chemical

Achieving high power density of 859.5 mW cm-2: Self-cross-linking polymer membrane based on rigid fluorenone structure

Gongyi Wei et al.

Summary: A self-cross-linking copolymer based on rigid fluorenone-modified polybenzimidazole (FPBI) has been designed and synthesized as high-temperature proton exchange membranes for the first time. The cross-linked membranes demonstrate excellent mechanical properties and high proton conductivity.

JOURNAL OF MEMBRANE SCIENCE (2022)

添加到收藏夹

Article Engineering, Chemical

Troger?s base polymer blended with poly(ether ketone cardo) for high temperature proton exchange membrane fuel cell applications

Ting Wang et al.

Summary: In this study, a DMBP-TB/PEKC/PA blend membrane with high conductivity and mechanical strength was successfully prepared by synthesizing TB polymer and doping with engineering thermoplastic PEKC. This provides a potential solution for the application of high temperature proton exchange membrane fuel cells.

JOURNAL OF MEMBRANE SCIENCE (2022)

添加到收藏夹

Article Engineering, Chemical

Enhanced diffusion dialysis performance of cross-linked poly(aryl piperidine) anion exchange membranes by thiol-ene click chemistry for acid recovery

Binghui Liu et al.

Summary: By introducing hydrophilic groups into the polymer, the dimensional stability and ion selectivity of cross-linked anion exchange membranes can be effectively improved.

JOURNAL OF MEMBRANE SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Anchoring Highly Sulfonated Hyperbranched PBI onto oPBI: Fast Proton Conduction with Low Leaching

Yan Wang et al.

Summary: A cross-linkable proton conductor SHBPBI was synthesized by sulfonating hyperbranched polybenzimidazole. A high-temperature proton exchange membrane was prepared with excellent thermal stability and proton conductivity. The composite membrane showed potential applications in proton exchange membrane fuel cells and direct methanol fuel cells due to its good performance in proton conduction, durability, and low leaching rate.

ACS APPLIED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Sulfonated Polyphosphazene-Blended Self-Cross-Linked Polybenzimidazole-Based High-Temperature Proton Exchange Membranes: High Efficiency in Proton Transport at Low Humidity

Weihui Cui et al.

Summary: The structure and properties of the self-covalent cross-linked chloromethylated polybenzimidazole (cCM-mPBI) and sulfonated polynaphthoxyphosphazene (SPNPP) composite membranes are studied. The results indicate that the self-covalent cross-linking structure improves the mechanical properties of the composite membranes and facilitates the formation of a greater level of ionic and hydrogen bonds. The high content of sulfonic acid groups, good compatibility with CM-mPBI, more alkaline sites exposed by self-cross-linking, exemption of nonconductive cross-linking agents, and a more compact hydrogen bond network synergistically contribute to the good proton conductivity of the composite membrane.

ACS APPLIED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Constructing unique carboxylated proton transport channels via the phosphoric acid etching of a metal-organic framework in a crosslinked branched polybenzimidazole

Peng Wang et al.

Summary: In this work, unique carboxylated proton transport channels were successfully constructed in a crosslinked branched PBI membrane using the metal-organic framework UIO-66-NH2. The resulting membrane exhibited high proton conductivity and outstanding long-term stability.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Construction of Novel Proton Transport Channels by Triphosphonic Acid Proton Conductor-Doped Crosslinked mPBI-Based High-Temperature and Low-Humidity Proton Exchange Membranes

Yan Wang et al.

Summary: A series of composite membranes based on crosslinked mPBI with cerium 2,4,6-triphosphono-1,3,5-triazine (CeTPT) were successfully fabricated, showing good proton conductivity and thermal stability. The addition of new high-temperature proton conductor CeTPT, along with tetrafunctional crosslinker TGDDM, efficiently improved the mechanical properties, dimensional stability, and oxidative resistance of the membranes. These membranes exhibited high proton conductivity and good methanol resistance, making them suitable for direct methanol fuel cells.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Physical

Multifunctional poly(ionic liquid)s cross-linked polybenzimidazole membrane with excellent long-term stability for high temperature-proton exchange membranes fuel cells

Fengxiang Liu et al.

Summary: Novel high temperature-proton exchange membranes (HT-PEMs) are prepared based on norbornene-type PBI (NbPBI) and double bond ionic liquids, showing high proton conductivity and enhanced phosphoric acid retention. The NbPBI-MPIm membrane exhibits excellent performance at high temperatures. After acid-base doping, NbPBI-PIL membranes demonstrate superior proton transport properties.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Chemistry, Physical

Polybenzimidazole-Based Semi-Interpenetrating Proton Exchange Membrane with Enhanced Stability and Excellent Performance for High-Temperature Proton Exchange Membrane Fuel Cells

Junqiao Jiang et al.

Summary: In this study, high-temperature proton exchange membranes with semi-interpenetrating network structure were developed. These membranes exhibit excellent proton conductivity, chemical stability, and mechanical properties, allowing successful operation at high temperatures.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Applied

High performance polymer electrolyte membrane with efficient proton pathway over a wide humidity range and effective cross-linking network

Yan Wang et al.

Summary: The mPBI-TGDDM/ZrSP polymer electrolyte membranes with high proton conductivity are prepared by covalent cross-linking and doping with ZrSP, showing great potential for direct methanol fuel cells.

REACTIVE & FUNCTIONAL POLYMERS (2021)

添加到收藏夹

Article Chemistry, Physical

Macromolecule sulfonated Poly(ether ether ketone) crosslinked poly(4,4′-diphenylether-5,5′-bibenzimidazole) proton exchange membranes: Broaden the temperature application range and enhanced mechanical properties

Jierui Song et al.

Summary: By covalently crosslinking polymers, the performance of proton exchange membranes was optimized to achieve high proton conductivity at both high and low temperatures. Compared with conventional membranes, crosslinked membranes demonstrated better fuel cell performance across the entire temperature range.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Constructing High-Performance Proton Transport Channels in HighTemperature Proton Exchange Membranes by Introducing Triazole Groups

Jianfa Liu et al.

Summary: This study successfully constructed proton transport channels in high-temperature proton exchange membranes by synthesizing organic triazole-grafted polymers and introducing them into cross-linked OPBI membranes. The membranes with triazole groups showed improved proton conductivity and mechanical properties compared to traditional OPBI membranes. These results indicate that moderately cross-linked membranes with triazole groups are promising materials for PEM applications.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Monolithic Macromolecule Membrane Based on Polybenzimidazole: Achieving High Proton Conductivity and Low Fuel Permeability through Multiple Cross-Linking

Hui Guo et al.

Summary: The study utilized a multifunctional proton conductor, TTPSA, to form a high-temperature PEM through multiple cross-linking with CMPEI and mPBI, avoiding leaching and enhancing comprehensive performance.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

High temperature proton exchange membrane fuel cells: progress in advanced materials and key technologies

Rizwan Haider et al.

Summary: High temperature proton exchange membrane fuel cells (HT-PEMFCs) have advantages such as fast reaction kinetics and high tolerance to impurities, but challenges like high cost and low durability hinder their practical applications. Researchers worldwide are focusing on exploring new materials and technologies to develop high-performance HT-PEMFCs. To facilitate further research and development of HT-PEMFCs, existing challenges are discussed and future research directions are proposed.

CHEMICAL SOCIETY REVIEWS (2021)

添加到收藏夹

Article Chemistry, Physical

Highly Conductive and Mechanically Stable Imidazole-Rich Cross-Linked Networks for High-Temperature Proton Exchange Membrane Fuel Cells

Xiaobai Li et al.

CHEMISTRY OF MATERIALS (2020)

添加到收藏夹

Article Engineering, Chemical

Proton exchange membranes with cross-linked interpenetrating network of sulfonated polyvinyl alcohol and poly (2-acrylamido-2-methyl-1-propanesulfonic acid): Excellent relative selectivity

Hai Qiang Li et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

添加到收藏夹

Article Engineering, Chemical

Olefin metathesis-crosslinked, bulky imidazolium-based anion exchange membranes with excellent base stability and mechanical properties

Xiaojuan Zhang et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

添加到收藏夹

Review Polymer Science

Recent Progress in the Development of Aromatic Polymer-Based Proton Exchange Membranes for Fuel Cell Applications

Raja R. S. Rafidah et al.

POLYMERS (2020)

添加到收藏夹

Article Chemistry, Physical

Highly Stable Membranes of Poly(phenylene sulfide benzimidazole) Cross-Linked with Polyhedral Oligomeric Silsesquioxanes for High-Temperature Proton Transport

Marco Viviani et al.

ACS APPLIED ENERGY MATERIALS (2020)

添加到收藏夹

Article Engineering, Chemical

In-situ crosslinked AEMs with self-assembled nanostructure for acid recovery

Wengen Ji et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Chemical

Enhancement in proton conductivity and methanol resistance of Nafion membrane induced by blending sulfonated poly(arylene ether ketones) for direct methanol fuel cells

Chunyu Ru et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

添加到收藏夹

Article Chemistry, Applied

Preparation and properties of ZrPA doped CMPSU cross-linked PBI based high temperature and low humidity proton exchange membranes

Yanan Lv et al.

REACTIVE & FUNCTIONAL POLYMERS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Construction of High-Performance, High-Temperature Proton Exchange Membranes through Incorporating SiO2 Nanoparticles into Novel Cross-linked Polybenzimidazole Networks

Xiaobai Li et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Constructing Amino-Functionalized Flower-like Metal Organic Framework Nanofibers in Sulfonated Poly(ether sulfone) Proton Exchange Membrane for Simultaneously Enhancing Interface Compatibility and Proton Conduction

Liyuan Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

Benzimidazole grafted polybenzimidazole cross-linked membranes with excellent PA stability for high-temperature proton exchange membrane applications

Xue Tian et al.

APPLIED SURFACE SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

An investigation of proton conductivity of PVA, PBI and SPEEK polymer membranes using molecular dynamics simulation

Mahmoud Rahmati et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

添加到收藏夹

Article Engineering, Chemical

Performance enhancement of polybenzimidazole based high temperature proton exchange membranes with multifunctional crosslinker and highly sulfonated polyaniline

Peng Sun et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

添加到收藏夹

Article Engineering, Chemical

Preparation and investigations of ABPBI membrane for HT-PEMFC by immersion precipitation method

Harshal D. Chaudhari et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Arylether-type polybenzimidazoles bearing benzimidazolyl pendants for high-temperature proton exchange membrane fuel cells

Xiaobai Li et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Cross-Linkable Polymeric Ionic Liquid Improve Phosphoric Acid Retention and Long-Term Conductivity Stability in Polybenzimidazole Based PEMs

Fengxiang Liu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

添加到收藏夹

Article Chemistry, Physical

A Promising Proton-Exchange Membrane: High Efficiency in Low Humidity

Koorosh Firouz Tadavani et al.

ACS APPLIED ENERGY MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Acid doped polybenzimidazoles based membrane electrode assembly for high temperature proton exchange membrane fuel cell: A review

M. Ahsanul Haque et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Pre-Oxidized Acrylic Fiber Reinforced Ferric Sulfophenyl Phosphate-Doped Polybenzimidazole-Based High-Temperature Proton Exchange Membrane

Peng Sun et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2017)

添加到收藏夹

Review Chemistry, Physical

A comprehensive review of PBI-based high temperature PEM fuel cells

Samuel Simon Araya et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

添加到收藏夹

Article Chemistry, Physical

Compatible ionic crosslinking composite membranes based on SPEEK and PBI for high temperature proton exchange membranes

Mingfeng Song et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

添加到收藏夹

Article Chemistry, Physical

Exceptional durability enhancement of PA/PBI based polymer electrolyte membrane fuel cells for high temperature operation at 200 degrees C

David Aili et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Insight into Proton Transfer in Phosphotungstic Acid Functionalized Mesoporous Silica-Based Proton Exchange Membrane Fuel Cells

Yuhua Zhou et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

添加到收藏夹

Article Chemistry, Physical

A high performance polybenzimidazole-CNT hybrid electrode for high-temperature proton exchange membrane fuel cells

He-Yun Du et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

添加到收藏夹

Article Chemistry, Physical

Semi-interpenetrating polymer network proton exchange membranes with narrow and well-connected hydrophilic channels

Chunliu Fang et al.

JOURNAL OF POWER SOURCES (2013)

添加到收藏夹

Article Chemistry, Physical

Polyelectrolyte composite membranes of polybenzimidazole and crosslinked polybenzimidazole-polybenzoxazine electrospun nanofibers for proton exchange membrane fuel cells

Hsieh-Yu Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

添加到收藏夹

Article Chemistry, Physical

Silane-cross-linked polybenzimidazole with improved conductivity for high temperature proton exchange membrane fuel cells

Shuang Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cerium sulfophenyl phosphate, a novel inorgano-organic solid proton-conducting material

Feilong Dong et al.

MATERIALS LETTERS (2011)

添加到收藏夹

Review Polymer Science

High temperature proton exchange membranes based on polybenzimidazoles for fuel cells

Qingfeng Li et al.

PROGRESS IN POLYMER SCIENCE (2009)

添加到收藏夹

Article Chemistry, Physical

Cross-linkable highly fluorinated poly(arylene ether ketones/sulfones) for optical waveguiding applications

YH Qi et al.

CHEMISTRY OF MATERIALS (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.