☆ 4.7 Article

Regulation of bimodal structure and mechanical properties of powder-thixoformed GO/ZK60 magnesium matrix composite through adjusting GO content

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

In-situ and ex-situ investigation of deformation behaviors of a dual-phase Mg-Ni-Y alloy

Cheng Liu et al.

Summary: The deformation behaviors of a dual-phase Mg alloy containing α-Mg and 18R-LPSO phases were investigated in this study. The 18R phase, accounting for 11.3 vol.%, contributed to 23.0% of the overall alloy deformation. The coordinated twinning deformation of α-Mg matrix through the slip of basal dislocations and the kinking deformation of Mg slices induced by the 18R phase were observed during the early stage of deformation. At the end of deformation, a large number of T2-type stacking faults were generated, improving the ductility of the alloy. This work provides a novel strategy for designing high-strength and good ductility dual-phase Mg alloys.

SCRIPTA MATERIALIA (2023)

添加到收藏夹

Article Materials Science, Composites

Ameliorating strength-ductility efficiency of graphene nanoplatelet-reinforced aluminum composites via deformation-driven metallurgy

Yuming Xie et al.

Summary: 1.5 wt% graphene nanoplatelet-reinforced aluminum matrix composites were prepared using deformation-driven metallurgy to enhance the strength-ductility efficiency. The study focused on the strengthening-toughening behaviors related to the dispersion of graphene nanoplatelets, interfacial bonding, and grain refinement. Severe plastic deformation and dynamic recrystallization resulted in the uniform dispersion of graphene nanoplatelets and ultra-fine microstructures. The composites showed high-efficiency interfacial bonding and achieved self-compensating spatial continuity through the automatic flow of Al2O3 nanodots.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Mechanical

In situ EBSD/DIC-based investigation of deformation and fracture mechanism in FCC- and L12-structured FeCoNiV high-entropy alloys

Zhenhua Ye et al.

Summary: This study investigated the plastic deformation behavior of a polycrystalline L1(2)-structured FeCoNiV high-entropy alloy (HEA) using in situ electron backscatter diffraction (EBSD) and digital image correlation (DIC) methods. The different deformation mechanisms and their effects on mechanical performance were explored. The results showed that slip systems and lattice rotation rate played important roles in determining the strength and deformation behavior of the HEA.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Anisotropic response in mechanical behavior of additively manufactured Al-Mn-Sc alloys by in-situ EBSD tensile tests

Wei Jiang et al.

Summary: This study investigated the correlation between grain orientation, size, and aspect ratio and mechanical properties in selectively laser melted Al-Mn-Sc alloys using in-situ EBSD tensile method. The results showed that grain orientation and size influenced the mechanical anisotropy, and mechanical anisotropy was accurately predicted by introducing an anisotropy coefficient.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Chemistry, Physical

Structure optimization for improving the strength and ductility of heterogeneous carbon nanotube/Al-Cu-Mg composites

K. Ma et al.

Summary: Heterogeneous carbon nanotube (CNT)/Al-Cu-Mg composites with ductile zones (DZs) and brittle zones (BZs) were fabricated, where the grain size and width of DZs were controlled by high energy ball milling (HEBM) for improved strength-ductility. Under optimized conditions, the heterogeneous composite showed a significant increase in elongation and tensile strength compared to the uniform composite, with appropriate grain refinement in the DZs alleviating low yield phenomenon and reducing stress concentration in the BZs.

CARBON (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Reinforced AZ91D magnesium alloy with thixomolding process facilitated dispersion of graphene nanoplatelets and enhanced interfacial interactions

Liwen Chen et al.

Summary: This study utilized magnesium matrix nanocomposites reinforced with graphene nanoplatelets, prepared using thixomolding process, and investigated the effects on their mechanical properties. The research findings indicate a relatively higher overall efficiency in preparing magnesium matrix nanocomposites using this technology.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Simultaneously enhanced strength and ductility of Al matrix composites through the introduction of intragranular nano-sized graphene nanoplates

Tielong Han et al.

Summary: This study successfully dispersed nano-sized graphene nanoplates with high-content in the matrix uniformly by a modified ball milling strategy, which led to the simultaneous enhancement of strength and uniform elongation of the composites.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure evolution and hot deformation behavior of carbon nanotube reinforced 2009Al composite with bimodal grain structure

K. Ma et al.

Summary: The hot deformation behaviors of bimodal carbon nanotube reinforced 2009Al (CNT/2009Al) composite were investigated by establishing processing map and characterizing microstructure evolution. The results showed that the grain size in the ultra-fine grained zones remained stable during deformation, while the coarse grained zones elongated and tended to be perpendicular to the compression direction. Low temperature with high strain rate (LTHR) and high temperature with low strain rate (HTLR) could increase the length/width ratio of the coarse grained zones, but also led to instable deformation.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

Thermodynamics and kinetics of hydriding and dehydriding reactions in Mg-based hydrogen storage materials

Qian Li et al.

Summary: Magnesium-based materials show promise as hydrogen storage candidates due to their high capacity, environmental friendliness, and high Clarke number characteristics. However, limited thermodynamic and kinetic properties have posed challenges for their engineering applications. Recent progress has focused on improving these properties through alloying, composite materials, and nanocrystallization, leading to enhanced hydrogen storage efficiency.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Synergistic strengthening and toughening of copper coated graphene nanoplates and in situ nanoparticles reinforced AA6111 composites

Chuang Guan et al.

Summary: This study investigates the synergistic effect between graphene nanoplates and in situ nanoparticles on aluminum matrix composites, showing that both GNPs and ZrB2 nanoparticles play a crucial role in reinforcing and toughening mechanisms. The composite with 0.1 wt% GNPs and 3 wt% ZrB2 achieved a high ultimate tensile strength of 426 MPa, 33.5% higher than that of AA6111, while maintaining an elongation greater than 15%.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Achieving high strength and ductility in copper matrix composites with graphene network

Lan Shi et al.

Summary: The graphene network/Cu (GN/Cu) composites are able to achieve a high strength and good ductility combination with low graphene content in the copper matrix. The efficient grain refinement strengthening, dislocation strengthening and load transfer strengthening are achieved through the construction of a graphene network in the composites. Additionally, effective crack bridging and deflection provided by the graphene network contribute to the toughening of the GN/Cu composites.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fracture, fatigue, and sliding-wear behavior of nanocomposites of alumina and reduced graphene-oxide

Qizhong Wang et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Chemistry, Physical

Enhancement of the strength-ductility relationship for carbon nanotube/Al-Cu-Mg nanocomposites by material parameter optimisation

Z. Y. Liu et al.

CARBON (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Graphene nanoplatelets-reinforced magnesium metal matrix nanocomposites with superior mechanical and corrosion performance for biomedical applications

Khurram Munir et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural evolution of hybrid aluminum matrix composites reinforced with SiC nanoparticles and graphene/graphite prepared by powder metallurgy

Jiangshan Zhang et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2020)

添加到收藏夹

Article Engineering, Industrial

Selective laser melting of TiN nanoparticle-reinforced AlSi10Mg composite: Microstructural, interfacial, and mechanical properties

C. Gao et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Balancing the strength and ductility of graphene oxide-carbon nanotube hybrid reinforced aluminum matrix composites with bimodal grain distribution

Z. Y. Xu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Novel Al-Ti-Nb-B grain refiners with superior efficiency for Al-Si alloys

Yang Li et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multistage work hardening assisted by multi-type twinning in ultrafine-grained heterostructural eutectic high-entropy alloys

Peijian Shi et al.

MATERIALS TODAY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Graphene nano-platelets reinforced aluminum composites with anisotropic compressive properties

Zhong Zheng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Engineering, Manufacturing

Achieving ultra-high strengthening and toughening efficiency in carbon nanotubes/magnesium composites via constructing micro-nano layered structure

Yeyang Xiang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Interfacial Modification Using Matrix Alloying in Mg/CNT Composites for Improved Mechanical Performance

Hailong Shi et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Deformation-driven metallurgy of graphene nanoplatelets reinforced aluminum composite for the balance between strength and ductility

Yuming Xie et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Chemistry, Physical

Effect of ball milling time on graphene nanosheets reinforced Al6063 composite fabricated by pressure infiltration method

Zhenhe Yu et al.

CARBON (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

The fabrication of graphene-reinforced Al-based nanocomposites using high-pressure torsion

Yi Huang et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Simultaneous improvement of strength and plasticity: Additional work-hardening from gradient microstructure

C. W. Shao et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion

M. G. Jiang et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Chemistry, Physical

Beyond the dimensional limitation in bio-inspired composite: Insertion of carbon nanotubes induced laminated Cu composite and the simultaneously enhanced strength and toughness

Linglong Meng et al.

CARBON (2018)

添加到收藏夹

Article Chemistry, Physical

Interface structure and strengthening behavior of graphene/CuCr composites

Ke Chu et al.

CARBON (2018)

添加到收藏夹

Article Engineering, Manufacturing

Microstructure and tensile properties of 5083 Al matrix composites reinforced with graphene oxide and graphene nanoplates prepared by pressure infiltration method

Puzhen Shao et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Structural and thermal characterization of multiwall carbon nanotubes (MWCNTs)/aluminum (Al) nanocomposites

S. Saadallah et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Multi-layer graphene reinforced aluminum - Manufacturing of high strength composite by friction stir alloying

Saurabh Dixit et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development of Graphene Nanoplatelet-Reinforced AZ91 Magnesium Alloy by Solidification Processing

Sinan Kandemir

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of carbon nanotubes on twin and texture evolution of magnesium matrix composite during compression process

W. B. Du et al.

MATERIALS CHARACTERIZATION (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Precipitate characteristics and synergistic strengthening realization of graphene nanoplatelets reinforced bimodal structural magnesium matrix composites

S. L. Xiang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Strengthening and toughening mechanisms of CNTs/Mg-6Zn composites via friction stir processing

Yongxian Huang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Chemistry, Physical

Achieving high strength and ductility in graphene/magnesium composite via an in-situ reaction wetting process

Miao Wang et al.

CARBON (2018)

添加到收藏夹

Article Engineering, Manufacturing

Enhanced overall strength and ductility of magnesium matrix composites by low content of graphene nanoplatelets

S. L. Xiang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

添加到收藏夹

Article Chemistry, Physical

Simultaneously enhancing the strength, ductility and conductivity of copper matrix composites with graphene nanoribbons

Ming Yang et al.

CARBON (2017)

添加到收藏夹

Article Chemistry, Physical

Solid-state interfacial reaction and load transfer efficiency in carbon nanotubes (CNTs)-reinforced aluminum matrix composites

B. Chen et al.

CARBON (2017)

添加到收藏夹

Article Chemistry, Physical

Effects of graphene content on the microstructure and properties of copper matrix composites

Fanyan Chen et al.

CARBON (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Exploring mechanical behavior of Mg-6Zn alloy reinforced with graphene nanoplatelets

Muhammad Rashad et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Partial Remelting on Microstructure of Al-Si-Ti Bulk Alloy Prepared by Cold Pressing Mixed Powders

Y. J. Wang et al.

MATERIALS TRANSACTIONS (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Ultrastructural Characterization of the Lower Motor System in a Mouse Model of Krabbe Disease

Valentina Cappello et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility

Xiaolei Wu et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Bi-modally structured pure aluminum for enhanced strength and ductility

Amal M. K. Esawi et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Chemistry, Physical

Distribution and integrity of carbon nanotubes in carbon nanotube/magnesium composites

C. D. Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Graphene Nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder method

Muhammad Rashad et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanoindentation behavior of nanotwinned Cu: Influence of indenter angle on hardness, strain rate sensitivity and activation volume

In-Chul Choi et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of Competition between Intragranular Dislocation Nucleation and Intergranular Slip Transfer on Mechanical Properties of Ultrafine-Grained Metals

Tomohito Tsuru et al.

MATERIALS TRANSACTIONS (2013)

添加到收藏夹

Article Chemistry, Physical

The use of flake powder metallurgy to produce carbon nanotube (CNT)/aluminum composites with a homogenous CNT distribution

Lin Jiang et al.

CARBON (2012)

添加到收藏夹

Review Multidisciplinary Sciences

A roadmap for graphene

K. S. Novoselov et al.

NATURE (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Plastic deformation behavior of AZ31 magnesium alloy under multiple passes cross compression

Yunchang Xin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructural evolution during reheating and tensile mechanical properties of thixoforged AZ91D-RE magnesium alloy prepared by squeeze casting-solid extrusion

Qiang Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Extension twin variant selection during uniaxial compression of a magnesium alloy

Y. Pei et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Reinforcement with graphene nanosheets in aluminum matrix composites

Jingyue Wang et al.

SCRIPTA MATERIALIA (2012)

添加到收藏夹

Article Engineering, Manufacturing

Addition of CNTs to enhance tensile/compressive response of magnesium alloy ZK60A

M. Paramsothy et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

Mechanical Properties of Mono layer Graphene Oxide

Ji Won Suk et al.

ACS NANO (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructural and mechanical analysis of carbon nanotube reinforced magnesium alloy powder composites

Katsuyoshi Kondoh et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation of the indentation size effect through the measurement of the geometrically necessary dislocations beneath small indents of different depths using EBSD tomography

Eralp Demir et al.

ACTA MATERIALIA (2009)

添加到收藏夹

Article Chemistry, Multidisciplinary

Simultaneously increasing the ductility and strength of ultra-fine-grained pure copper

Yong-Hao Zhao et al.

ADVANCED MATERIALS (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Plastic deformation and fracture of ultrafine-grained Al-Mg alloys with a bimodal grain size distribution

GJ Fan et al.

ACTA MATERIALIA (2006)

添加到收藏夹

Article Multidisciplinary Sciences

High tensile ductility in a nanostructured metal

YM Wang et al.

NATURE (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.