相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Cryogenic wear behaviors of a metastable Ti-based bulk metallic glass composite
Yue Ren et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)
Effect of aging treatment on properties of Al-Si alloy solidified at high-pressure
Haosheng Huang et al.
MATERIALS SCIENCE AND TECHNOLOGY (2023)
Stellite 6 Cladding on AISI Type 316L Stainless Steel: Microstructure, Nanohardness and Corrosion Resistance
N. Jeyaprakash et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2023)
On the performance of metallurgical behaviour of Stellite 6 cladding deposited on SS316L substrate with PTAW process
Vivek Kalyankar et al.
CANADIAN METALLURGICAL QUARTERLY (2022)
Effects of structure relaxation and surface oxidation on nanoscopic wear behaviors of metallic glass
Qian Jia et al.
ACTA MATERIALIA (2022)
The effect of solution and aging treatments on the microstructure and mechanical properties of a selective laser melted CoCrMo alloy
Zhiyun Ye et al.
JOURNAL OF MATERIALS SCIENCE (2022)
Aging strengthening treatment of laser cladding Co-based alloy coating
Changyao Ouyang et al.
MATERIALS LETTERS (2022)
Microstructural evolution and local mechanical properties of dendrites in Al0.6CoCrFeNi high entropy alloy
Genfeng Shang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Understanding Stellite-6 coating prepared by laser cladding: Convection and columnar-to-equiaxed transition
Cui Chen et al.
OPTICS AND LASER TECHNOLOGY (2022)
In-situ monitoring and modelling of distortion in multi-layer laser cladding of Stellite 6: Parametric and numerical approach
Nikhil Thawari et al.
MATERIALS TODAY COMMUNICATIONS (2022)
Microstructure, hardness and slurry erosion-wear behaviors of high-speed laser cladding Stellite 6 coatings prepared by the inside-beam powder feeding method
Ziyi Yang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)
Corrosion and mechanical properties of hot-rolled 0.5%Gd-0.8%B-stainless steels in a simulated nuclear waste treatment solution
Moo Young Jung et al.
NUCLEAR ENGINEERING AND TECHNOLOGY (2019)
Effects of Isothermal Aging Process on Microstructure and Mechanical Properties of Stellite 6 Coatings by Plasma Arc Cladding
Dezhi Yang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Unique defect evolution during the plastic deformation of a metal matrix composite
Yanfang Liu et al.
SCRIPTA MATERIALIA (2019)
Pile-up response of polymer thin films to static and dynamic loading
G. Mallikarjunachari et al.
THIN SOLID FILMS (2019)
Characterization of Microstructure and Mechanical Properties of Stellite 6 Part Fabricated by Wire Arc Additive Manufacturing
Zixiang Li et al.
METALS (2019)
Microstructural evolution and resulting properties of differently sintered and heat-treated binder-jet 3D-printed Stellite 6
Amir Mostafaei et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Evaluation of the mechanical properties of laser cladded hypereutectoid steel rails
Taposh Roy et al.
WEAR (2019)
Effect of heat treatment on the hardness and wear resistance of electrodeposited Co-B alloy coatings
Alma Martinez-Hernandez et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Experimental Characterization of a Direct Metal Deposited Cobalt-Based Alloy on Tool Steel for Component Repair
Xinchang Zhang et al.
JOM (2019)
Nanoscratch Behavior of Metallic Glass/Crystalline Nanolayered Composites
Mohammad Abboud et al.
JOM (2019)
Radiation damage and irradiation-assisted stress corrosion cracking of additively manufactured 316L stainless steels
Miao Song et al.
JOURNAL OF NUCLEAR MATERIALS (2019)
Isothermal Transformation of -Co to ε-Co in Stellite 6 Coatings
Dezhi Yang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Developing the ductility and thermal fatigue cracking property of laser-deposited Stellite 6 coatings by adding titanium and nickel
Ying Wu et al.
MATERIALS & DESIGN (2019)
High-Temperature Wear Behavior of Laser-Cladding Stellite 6 Coating
Yu Ting et al.
LASER & OPTOELECTRONICS PROGRESS (2019)
Effect of phase coarsening on the mechanical properties of alloys: I. Numerical simulations
J. C. Li et al.
ENGINEERING FRACTURE MECHANICS (2018)
An investigation into the aging behavior of CoCrMo alloys fabricated by selective laser melting
Mingkang Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Primary microstructure, microsegregation and precipitates characterization of an as-cast new type γ-γ' Co-Al-Mo-Nb cobalt-based superalloy
Agnieszka Tomaszewska et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effect of heat treatment on the microstructure of Co-Cr-W alloy fabricated by laser additive manufacturing
Bo Ren et al.
OPTICAL ENGINEERING (2018)
Improved hardness and wear resistance of plasma sprayed nanostructured NiCrBSi coating via short-time heat treatment
Liang-Yu Chen et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Properties of HVOF-sprayed Stellite-6 coatings
Paolo Sassatelli et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Microstructure and mechanical properties investigation of stellite 6 and Stellite 6/TiC coating on ASTM A105 steel produced by TIG welding process
A. Shahroozi et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Improvement of Wear Performance of Nano-Multilayer PVD Coatings under Dry Hard End Milling Conditions Based on Their Architectural Development
Shahereen Chowdhury et al.
COATINGS (2018)
Influence of strain rate effect on material removal and deformation mechanism based on ductile nanoscratch tests of Lu2O3 single crystal
Chen Li et al.
CERAMICS INTERNATIONAL (2018)
Wear Characteristic of Stellite 6 Alloy Hardfacing Layer by Plasma Arc Surfacing Processes
Zhiyuan Zhu et al.
SCANNING (2017)
Effect of electrodeposition conditions on structure and mechanical properties of Ni-W/diamond composite coatings
Malay Kumar Das et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Effect of hardness, microstructure, normal load and abrasive size on friction and on wear behaviour of 35NCD16 steel
Celine Trevisiol et al.
WEAR (2017)
Effect of interlayers on the microstructure and wear resistance of Stellite 6 coatings deposited on AISI 420 stainless steel by GTAW technique
G. R. Mirshekari et al.
SURFACES AND INTERFACES (2017)
Effect of Heat Treatment on the Microstructure and Properties of HVOF-Sprayed Co-Cr-W Coating
Sarka Houdkova et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2016)
Strengthening of nanoprecipitations in an annealed Al0.5CoCrFeNi high entropy alloy
Sizhe Niu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Analysis of strength and response of polymer nano thin film interfaces applying nanoindentation and nanoscratch techniques
G. Mallikarjunachari et al.
POLYMER (2016)
Investigation of microstructural damage to eutectic carbides from scratch tests of a heat-treated Fe-Cr-W-Mo-V-C alloy
Jing Guo et al.
WEAR (2016)
Coarsening behaviour of M23C6 carbides in creep-resistant steel exposed to high temperatures
M. Godec et al.
SCIENTIFIC REPORTS (2016)
Combined Effects of pH and γ-Irradiation on the Corrosion of Co-Cr Alloy Stellite-6
M. Behazin et al.
ELECTROCHIMICA ACTA (2014)
Microstructural evolution and mechanical properties of heat affected zones for 9Cr2WVTa steels with different carbon contents
Jian Wang et al.
MATERIALS & DESIGN (2014)
The Effects of HIP, Solution Heat Treatment and Aging Treatments on the Microstructure and Mechanical Properties of Sintering Cobalt-Based Alloys Strengthened with Tantalum Carbide Additives
Shih-Hsien Chang et al.
MATERIALS TRANSACTIONS (2014)
Structure-property relationships in a CoCrMo alloy at micro and nano-scales
R. Ahmed et al.
TRIBOLOGY INTERNATIONAL (2014)
Optimization on mechanical properties of Fe7-xCrxC3 carbides by first-principles investigation
Pengfei Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Microstructural characterization and mechanical properties of an Al0.5CoCrFeCuNi high-entropy alloy in as-cast and heat-treated/quenched conditions
H. F. Sheng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Characterization of local mechanical properties of laser-cladding H13-TiC composite coatings using nanoindentation and finite element analysis
ShengTing Gu et al.
MATERIALS & DESIGN (2012)
Effect of inorganic constituent on nanomechanical and tribological properties of polymer, quasi-ceramic and hybrid coatings
Atul Tiwari et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Micromechanical characterization of casting-induced inhomogeneity in an Al0.8CoCrCuFeNi high-entropy alloy
Zhiyuan Liu et al.
SCRIPTA MATERIALIA (2011)
The structure and mechanical and tribological properties of TiBCN nanocomposite coatings
Jianliang Lin et al.
ACTA MATERIALIA (2010)
Nanoindentation and the dynamic characterization of viscoelastic solids
E. G. Herbert et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2008)
Corrosion issues in nuclear industry today
Francois Cattant et al.
MATERIALS TODAY (2008)
Tribological properties of laser clad Stellite 6 coatings on steel substrates
C Navas et al.
SURFACE ENGINEERING (2006)
The effects of triple junctions and grain boundaries on hardness and Young's modulus in nanostructured Ni-P
Y Zhou et al.
SCRIPTA MATERIALIA (2003)
On the significance of the H/E ratio in wear control:: a nanocomposite coating approach to optimised tribological behaviour
A Leyland et al.
WEAR (2000)