☆ 4.6 Article

A novel macro-micro integrated incremental sheet forming process for fabricating parts with functional surface microfeatures

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Achieving robust and enhanced pool boiling heat transfer using micro-nano multiscale structures

Xiaoliang Wang et al.

Summary: This paper proposes a fabrication method of capillary wicks with micro-nano multiscale structures using micro hot embossing and high-pressure hydrothermal treatment. The superhydrophilic micro-nano structures achieve significantly improved critical heat flux and heat transfer coefficient simultaneously. Moreover, the fabricated micro-nano capillary wick can maintain its outstanding superhydrophilicity and superhydrophobicity even after high-pressure high-velocity fluid scouring. This cost-effective fabrication method provides an ideal approach for mass production of vapor chamber capillary wicks suitable for severe application environments.

APPLIED THERMAL ENGINEERING (2023)

添加到收藏夹

Article Thermodynamics

Electrically assisted manufacturing of microchannels with enhanced filling quality and microstructural performance for thermal management

Feng Pan et al.

Summary: This study investigated the filling behavior and microstructural evolution of SUS304 sheets under the influence of electric current. The results showed that a higher current density can shorten the initial extrusion stage and improve the filling height and profile quality. The electron backscatter diffraction (EBSD) results demonstrated the occurrence of recrystallization due to the synergistic effect of deformation and current. A high-performance PCHE prototype was successfully manufactured by electrically assisted manufacturing (EAM), confirming its capability for high-quality fabrication of enhanced microchannels.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2023)

添加到收藏夹

Review Automation & Control Systems

Sustainability assessment of incremental sheet forming: a review

Fuyuan Liu et al.

Summary: This study reviews the research on energy consumption and environmental impact of ISF, and provides valuable guidance on further improving efficiency and green manufacturing processes.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Optics

Controllable hydrophilic titanium surface with micro-protrusion or micro-groove processed by femtosecond laser direct writing

Wanying He et al.

Summary: This study presents a controllable hydrophilic titanium surface with switchable wettability, achieved by femtosecond laser processing. The transformation from micro-groove to micro-protrusion is realized by adjusting laser processing parameters, and the formation mechanism is explored. The micro-protrusion array shows better hydrophilicity compared to the micro-groove array and can maintain it even after long-term use.

OPTICS AND LASER TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Physical

Hot deformation behavior and microstructure evolution of Inconel 625 superalloy sheet

Rong Kong et al.

Summary: The hot deformation behavior and microstructural evolution of Inconel 625 superalloy sheet under different conditions were investigated. The plastic flow behavior of the Inconel 625 sheet changes from work hardening to hot softening with the rise of experimental temperature and the decline of strain rate. The optimal hot working window appears at the temperature range of 925 and 950 degrees C and the strain rate between 0.001 and 0.1 s-1 with the power dissipation efficiency of about 46.5%.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Engineering, Mechanical

The synergetic effects of laser texturing and super-hydrophobic coatings on improving wear properties of steel

Hujun Wang et al.

Summary: By investigating the synergetic effects of laser texturing and super-hydrophobic coatings, this study found that coated groove-textured surfaces (CGSs) exhibit significant anti-friction and wear-resisting properties under low load. The wear resistance of CGSs decreases with increasing texture density. A load of 0.5 N applied on CGSs with a texture density of 10% reduced the friction coefficient and wear loss by 22.3% and 73.5%, respectively, compared to polished steel surfaces (PSSs).

TRIBOLOGY INTERNATIONAL (2022)

添加到收藏夹

Article Engineering, Chemical

Heat and/or mass transfer intensification in helical pipes: Optimal helix geometries and comparison with alternative enhancement techniques

Omran Abushammala et al.

Summary: Maximizing transfer performances in heat and mass exchangers is a key target for process intensification. Flux enhancement can be achieved through increased specific surface area and transfer coefficients, but must be balanced with energy requirements. Novel performance criteria considering specific surface area effects and friction losses were proposed and applied to helical pipe exchangers, revealing potential for intensified heat/mass transfer performances in certain unique designs.

CHEMICAL ENGINEERING SCIENCE (2021)

添加到收藏夹

Review Thermodynamics

A review on flow boiling enhancement and fabrication of enhanced microchannels of microchannel heat sinks

Daxiang Deng et al.

Summary: This paper comprehensively reviews recent advancements in flow boiling enhancement and fabrication of enhanced microchannels. It emphasizes the flow boiling enhancement performance of these enhanced microchannels in microchannel heat sinks, while also discussing their advantages and disadvantages after summarizing the classification and manufacturing methods of enhanced microchannels.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Automation & Control Systems

Investigation on the roll-to-plate microforming of riblet features with the consideration of grain size effect

Zhutian Xu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Incremental sheet forming towards biomedical implants: a review

Zinan Cheng et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A mathematical model to predict thickness distribution and formability of incremental forming combined with stretch forming

Hyunwoo Choi et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2019)

添加到收藏夹

Article Engineering, Industrial

In-situ springback compensation in incremental sheet forming

Huaqing Ren et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Industrial

Microstructure and texture based analysis of forming behavior and deformation mechanism of AA1050 sheet during Single Point Incremental Forming

Parnika Shrivastava et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Grain Size on Formability and Deformation Mechanism of High-Purity Aluminum during Micro-Embossing Process at Elevated Temperature

Qian Su et al.

ADVANCED ENGINEERING MATERIALS (2019)

添加到收藏夹

Review Engineering, Manufacturing

Advances in ultra-precision machining of micro-structured functional surfaces and their typical applications

Shaojian Zhang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)

添加到收藏夹

Article Engineering, Industrial

Experimental study of water jet incremental micro-forming with supporting dies

Yi Shi et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

添加到收藏夹

Article Automation & Control Systems

Forming behavior and microstructural evolution during single point incremental forming process of AA-6061 aluminum alloy sheet

Vivek Kumar Barnwal et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Automation & Control Systems

Effects of process parameters on thickness thinning and mechanical properties of the formed parts in incremental sheet forming

Yanle Li et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Manufacturing

Numerical and experimental investigation on the deformation mechanism of micro single point incremental forming process

X. Song et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Formability and Force Analysis of Steel Foils in Single Point Micro-Incremental Forming (SPMIF)

Thirumalai Muthusamy et al.

MATERIALS TODAY-PROCEEDINGS (2018)

添加到收藏夹

Review Engineering, Manufacturing

A review of geometrical and microstructural size effects in micro-scale deformation processing of metallic alloy components

M. W. Fu et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)

添加到收藏夹

Article Engineering, Manufacturing

Investigation of material deformation mechanism in double side incremental sheet forming

B. Lu et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)

添加到收藏夹

Article Engineering, Manufacturing

A Mixed Double-Sided Incremental Forming Toolpath Strategy for Improved Geometric Accuracy

Zixuan Zhang et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2015)

添加到收藏夹

Article Engineering, Industrial

Grain and geometry size effects on plastic deformation in roll-to-plate micro/meso-imprinting process

Zhaoyang Gao et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Industrial

Micro hot embossing of micro-array channels in ultrafine-grained pure aluminum using a silicon die

Jie Xu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Manufacturing

Single point and asymmetric incremental forming

J. Jeswiet et al.

ADVANCES IN MANUFACTURING (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of grooved roll profiles on microstructure evolutions of AZ31 sheets in Periodical Straining Rolling process

Kosei Shimoyama et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Article Automation & Control Systems

Deformation mechanics in single-point and accumulative double-sided incremental forming

Jacob Smith et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)

添加到收藏夹

Article Green & Sustainable Science & Technology

Drag reduction of large wind turbine blades through riblets: Evaluation of riblet geometry and application strategies

Leonardo P. Chamorro et al.

RENEWABLE ENERGY (2013)

添加到收藏夹

Article Engineering, Manufacturing

Experimental Study of Failure Modes and Scaling Effects in Micro-Incremental Forming

Michael Beltran et al.

JOURNAL OF MICRO AND NANO-MANUFACTURING (2013)

添加到收藏夹

Article Engineering, Manufacturing

An Experimental Investigation on the Fabrication of Micro/Meso Surface Features by Metallic Roll-to-Plate Imprinting Process

Zhaoyang Gao et al.

JOURNAL OF MICRO AND NANO-MANUFACTURING (2013)

添加到收藏夹

Article Engineering, Industrial

Development of a micro-forming system for micro-punching process of micro-hole arrays in brass foil

Jie Xu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of the rotary embossing process on mechanical properties in aluminum alloy 1050 sheet

H. Guler et al.

METALS AND MATERIALS INTERNATIONAL (2012)

添加到收藏夹

Article Engineering, Manufacturing

An Investigation On Deformation-Based Surface Texturing

Rui Zhou et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2011)

添加到收藏夹

Article Engineering, Industrial

A numerical investigation of the continuous bending under tension test

A. Hadoush et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)

添加到收藏夹

Article Automation & Control Systems

Fabricating microgrooves with varied cross-sections by electrodischarge machining

Jiwang Van et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)

添加到收藏夹

Article Engineering, Manufacturing

Dieless incremental micro-forming of miniature shell objects of aluminum foils

Toshiyuki Obikawa et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)

添加到收藏夹

Article Engineering, Industrial

The mechanics of incremental sheet forming

Kathryn Jackson et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

添加到收藏夹

Article Engineering, Manufacturing

Pulsed Nd:YAG laser turning of micro-groove on aluminum oxide ceramic (Al2O3)

D. Dhupal et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)

添加到收藏夹

Article Physics, Applied

Differences in deformation processes in nanocrystalline nickel with low- and high-angle boundaries from atomistic simulations

MJ Caturla et al.

APPLIED PHYSICS LETTERS (2004)

添加到收藏夹

Article Engineering, Industrial

An in-situ incremental microforming system for three-dimensional shell structures of foil materials

Y Saotome et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.