☆ 4.5 Article

The Effects of Process Parameters on Tensile Characteristics and Printing Time for Masked Stereolithography Components, Analyzed Using the Response Surface Method

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Investigation and Analysis of Effect of Curing Process on Compressive Strength Performance of Stereolithography-Printed Components

Sunil J. Raykar et al.

Summary: This study analyzes the effect of post-curing on the compressive strength of 3D-printed objects using the stereolithography (SLA) technique. It is found that layer height and hollow thickness have a significant impact on compressive strength, while exposure time has a smaller effect. The highest compressive strength obtained considering layer height as a parameter is 42.44 MPa, and considering exposure time and hollow thickness as parameters, the highest compressive strength obtained is 39.07 and 42.46 MPa, respectively.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2023)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Color stability, surface roughness and flexural strength of additively manufactured and milled interim restorative materials after aging

Almira Ada Diken Turksayar et al.

Summary: This study evaluated the effects of two different additive manufacturing technologies on the color stability, surface roughness, and biaxial flexural strength of interim restorative materials after thermal aging. The results showed that SLA and DLP had similar color stability and surface roughness after aging, while milling had a negative impact on the initial surface roughness. Additionally, SLA and milling had better mechanical properties compared to DLP.

ODONTOLOGY (2023)

添加到收藏夹

Article Engineering, Mechanical

Parametric optimization for dimensional correctness of 3D printed part using masked stereolithography: Taguchi method

N. Dhanunjayarao Borra et al.

Summary: This study aims to optimize the printing parameters of the Masked Stereolithography apparatus for dimensional correctness of 3D printed parts using the Taguchi method. By using acrylate-based photopolymer resin and LCD-type resin 3D printer, the experiment is conducted, and analysis of variance and regression equations are used to determine the optimal parameter combination. It is found that exposure time plays an important role in the output measures. Additionally, a comparison between MSLA and FFF techniques is made to evaluate the quality and features of MSLA 3D printing technology.

RAPID PROTOTYPING JOURNAL (2023)

添加到收藏夹

Article Engineering, Mechanical

Evaluation of effect and optimizing of process parameters for fused deposition modeling parts on tensile properties via Taguchi method

Sermet Demir et al.

Summary: This paper analyzes the effect of printing parameters on the mechanical properties of standard dog bone specimens manufactured by fused deposition modeling. The results show that the raster angle is the most influential parameter for ultimate tensile strength, while nozzle temperature and nozzle diameter also have certain effects. By determining the optimal combination of parameters, the desired mechanical properties can be obtained.

RAPID PROTOTYPING JOURNAL (2023)

添加到收藏夹

Review Dentistry, Oral Surgery & Medicine

A review on Vat Photopolymerization 3D-printing processes for dental application

Lalatovic Andjela et al.

Summary: This study provides a critical overview of Vat Photopolymerization in the dental field, highlighting the need for further research to elevate the field and transition to digital workflow in the future.

DENTAL MATERIALS (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Analysis of process parameters of 3D printing for surface finish, printing time and tensile strength

Vaibhav Bhosale et al.

Summary: This paper presents an analysis and optimization of fused deposition modeling (FDM) for surface finish, printing time, and tensile strength. The study concludes that layer thickness and infill percentage are crucial parameters for the strength and surface roughness of 3D printed parts.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Statistical and Experimental Analysis of Process Parameters of 3D Nylon Printed Parts by Fused Deposition Modeling: Response Surface Modeling and Optimization

Mahmoud Moradi et al.

Summary: The study investigates the additive manufacturing of nylon using statistical analysis and explores the impact of different process parameters on various properties of the parts. By optimizing the process parameters, the study aims to enhance efficiency and performance through experimental research and evaluation.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Fracture load of 3D-printed fixed dental prostheses compared with milled and conventionally fabricated ones: the impact of resin material, build direction, post-curing, and artificial aging-an in vitro study

Marcel Reymus et al.

CLINICAL ORAL INVESTIGATIONS (2020)

添加到收藏夹

Article Engineering, Mechanical

Investigations of the mechanical properties on different print orientations in SLA 3D printed resin

J. S. Saini et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2020)

添加到收藏夹

Article Automation & Control Systems

Improving additive manufacturing performance by build orientation optimization

Marina A. Matos et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Article Energy & Fuels

Determination of a diesel engine operating parameters powered with canola, safflower and waste vegetable oil based biodiesel combination using response surface methodology (RSM)

Suleyman Simsek et al.

FUEL (2020)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Prediction of tensile strength in FDM printed ABS parts using response surface methodology (RSM)

R. Srinivasan et al.

MATERIALS TODAY-PROCEEDINGS (2020)

添加到收藏夹

Article Polymer Science

Effects of raster angle on the mechanical properties of PLA and Al/PLA composite part produced by fused deposition modeling

Xinzhou Zhang et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2019)

添加到收藏夹

Article Engineering, Biomedical

Optimization of photocrosslinkable resin components and 3D printing process parameters

Antonio J. Guerra et al.

ACTA BIOMATERIALIA (2019)

添加到收藏夹

Article Engineering, Mechanical

An assessment of the dimensional accuracy and geometry-resolution limit of desktop stereolithography using response surface methodology

Ivana Cotabarren et al.

RAPID PROTOTYPING JOURNAL (2019)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Optimization of stereolithographic 3D printing parameters using Taguchi method for improvement in mechanical properties

Ratiporn Munprom et al.

MATERIALS TODAY-PROCEEDINGS (2019)

添加到收藏夹

Article Engineering, Mechanical

Curing parameters to improve the mechanical properties of stereolithographic printed specimens

Matthew P. Watters et al.

RAPID PROTOTYPING JOURNAL (2018)

添加到收藏夹

Article Engineering, Mechanical

A study on material-process interaction and optimization for VAT-photopolymerization processes

Elisa Aznarte Garcia et al.

RAPID PROTOTYPING JOURNAL (2018)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Effects of build direction on the mechanical properties of 3D-printed complete coverage interim dental restorations

Nawal Alharbi et al.

JOURNAL OF PROSTHETIC DENTISTRY (2016)

添加到收藏夹

Article Engineering, Mechanical

Effects of environmental conditions, aging, and build orientations on the mechanical properties of ASTM type I specimens manufactured via stereolithography

Karina Puebla et al.

RAPID PROTOTYPING JOURNAL (2012)

添加到收藏夹

Article Engineering, Industrial

Additive layered manufacturing: sectors of industrial application shown through case studies

Vojislav Petrovic et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2011)

添加到收藏夹

Article Engineering, Mechanical

Using response surface methodology to optimize the stereolithography process

Gamal Weheba et al.

RAPID PROTOTYPING JOURNAL (2006)

添加到收藏夹

Article Engineering, Mechanical

Functionalizing stereolithography resins: effects of dispersed multi-walled carbon nanotubes on physical properties

J. Hector Sandoval et al.

RAPID PROTOTYPING JOURNAL (2006)

添加到收藏夹

Article Engineering, Mechanical

Influence of layer thickness on mechanical properties in stereolithography

K. Chockalingam et al.

RAPID PROTOTYPING JOURNAL (2006)

添加到收藏夹

Article Automation & Control Systems

The rapid prototyping technologies

S Upcraft et al.

ASSEMBLY AUTOMATION (2003)

添加到收藏夹

Article Engineering, Manufacturing

Parametric process optimization to improve the accuracy of rapid prototyped stereolithography parts

JG Zhou et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.