☆ 4.5 Article

A Two-Stage Focal Transformer for Human-Robot Collaboration-Based Surface Defect Inspection

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Manufacturing

Flaw Detection in Multi-Laser Powder Bed Fusion Using In Situ Coaxial Multi-Spectral Sensing and Deep Learning

Amit Surana et al.

Summary: Multi-laser powder bed fusion (M-LPBF) systems are gaining attention in metal additive manufacturing for their promise of increased productivity and part size without compromising on feature resolution or mechanical properties. However, M-LPBF introduces unique challenges due to the interaction of multiple moving heat sources, which can result in unexpected flaws and process anomalies. This article presents a novel in situ sensing and machine learning-based flaw detection method for M-LPBF.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2023)

添加到收藏夹

Article Engineering, Manufacturing

MVGCN: Multi-View Graph Convolutional Neural Network for Surface Defect Identification Using Three-Dimensional Point Cloud

Yinan Wang et al.

Summary: Surface defect identification is a crucial task in manufacturing systems. Using a 3D point cloud can accurately detect and classify surface defects.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2023)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Knowledge augmented broad learning system for computer vision based mixed-type defect detection in semiconductor manufacturing

Junliang Wang et al.

Summary: This paper presents a knowledge augmented broad learning system with a knowledge module and broad selective sampling module, which provides a multichannel selective sampling network to decouple mixed-type defects. Experimental results show that the proposed model outperforms conventional and other deep learning models, demonstrating the effectiveness of the knowledge augmented broad selective sampling mechanism for mixed-type defect detection.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2023)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A hierarchical training-convolutional neural network with feature alignment for steel surface defect recognition

Yiping Gao et al.

Summary: This paper proposes a hierarchical training-CNN with feature alignment for vision-based defect recognition in steel. The method achieves improved performance by introducing a feature alignment and a hierarchical training strategy. It outperforms other CNNs in recognition results and has been successfully applied in a real-world case with significant improvement.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2023)

添加到收藏夹

Article Engineering, Electrical & Electronic

EMRA-Net: A Pixel-Wise Network Fusing Local and Global Features for Tiny and Low-Contrast Surface Defect Detection

Qiangqiang Lin et al.

Summary: This article proposes an edge and multi-scale reverse attention network (EMRA-Net) for tiny and low-contrast surface defect detection. Through feature extraction and fusion, the EMRA-Net outperforms existing methods and shows great potential in defect detection.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2022)

添加到收藏夹

Article Engineering, Manufacturing

Multimodal Data-Driven Robot Control for Human-Robot Collaborative Assembly

Sichao Liu et al.

Summary: This article investigates multimodal data-driven robot control for human-robot collaborative assembly. A programming-free human-robot interface is designed to fuse multimodal human commands, and deep learning is explored for accurate translation of brainwave command phrases into robot commands. Event-driven function blocks are used for high-level robot control, and a case study is conducted to demonstrate the effectiveness of the system.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2022)

添加到收藏夹

Article Automation & Control Systems

Multiple Granularities Generative Adversarial Network for Recognition of Wafer Map Defects

Jianbo Yu et al.

Summary: Wafer map defect recognition (WMDR) is crucial in the integrated circuit manufacturing system. Multi-granularity GAN (MGGAN) is proposed to enhance the performance in recognizing wafer map defects, addressing issues like class imbalance and lack of labeled data. Experimental results show that MGGAN has significantly improved image enhancement and generation compared to traditional deep neural networks.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2022)

添加到收藏夹

Article Engineering, Aerospace

MicroCrack-Net: A Deep Neural Network With Outline Profile-Guided Feature Augmentation and Attention-Based Multiscale Fusion for MicroCrack Detection of Tantalum Capacitors

Mingyang Cheng et al.

Summary: This article proposes a detection model called MicroCrack-Net with outline profile-guided feature augmentation and attention-based multiscale fusion. The experimental results demonstrate that the proposed model performs effectively and has superior performance in detecting microcracks.

IEEE TRANSACTIONS ON AEROSPACE AND ELECTRONIC SYSTEMS (2022)

添加到收藏夹

Article Automation & Control Systems

A New Cycle-consistent Adversarial Networks With Attention Mechanism for Surface Defect Classification With Small Samples

Long Wen et al.

Summary: This article proposes a new surface defect detection method called AttenCGAN, which utilizes cycle-consistent adversarial networks with attention mechanism. By synthesizing defect samples and enhancing features using attention mechanism, this method outperforms other published methods in terms of accuracy.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2022)

添加到收藏夹

Article Automation & Control Systems

A Hierarchical Training-Convolutional Neural Network for Imbalanced Fault Diagnosis in Complex Equipment

Yiping Gao et al.

Summary: Complex equipment is crucial in industry, and fault diagnosis is a key technology. This article proposes a hierarchical training-CNN method to address the issue of imbalanced data, using effective number-resampling to balance the data and introducing magnet-loss pretraining to handle feature overlap. The proposed method achieves good diagnosis performances in a real-world case.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2022)

添加到收藏夹

Article Computer Science, Artificial Intelligence

A steel surface defect inspection approach towards smart industrial monitoring

Ruiyang Hao et al.

Summary: The study introduces a steel surface defect inspection model that extracts complex features from multi-shape steel surface defects using a deformable convolution enhanced backbone network. A feature fusion network with balanced feature pyramid generates high-quality multi-resolution feature maps for the inspection of multi-size defects, and a detector network achieves the localization and classification of steel surface defects. The proposed model achieves high efficiency in inference with a mAP of 0.805, 0.144 higher than baseline models, while maintaining a balance between inspection performance and inference efficiency.

JOURNAL OF INTELLIGENT MANUFACTURING (2021)

添加到收藏夹

Article Computer Science, Artificial Intelligence

CS-ResNet: Cost-sensitive residual convolutional neural network for PCB cosmetic defect detection

Huan Zhang et al.

Summary: In this study, a novel cost-sensitive residual convolutional neural network model (CS-ResNet) was proposed to optimize PCB cosmetic defect detection by adding a cost-sensitive adjustment layer. Experimental results showed that CS-ResNet outperformed in multiple aspects.

EXPERT SYSTEMS WITH APPLICATIONS (2021)

添加到收藏夹

Article Computer Science, Artificial Intelligence

CADN: A weakly supervised learning-based category-aware object detection network for surface defect detection

Jiabin Zhang et al.

Summary: The proposed weakly supervised learning method, CADN, is designed for surface defect detection. It can be trained with image tag annotations only and performs image classification and defect localization simultaneously, with good real-time performance and high accuracy achieved.

PATTERN RECOGNITION (2021)

添加到收藏夹

Article Engineering, Industrial

Industry 4.0 and Industry 5.0-Inception, conception and perception

Xun Xu et al.

Summary: Industry 4.0, originating from Germany, has been widely adopted globally in the past decade. The European Commission recently introduced Industry 5.0, which is value-driven in contrast to the technology-driven Industry 4.0. The coexistence of these two Industrial Revolutions raises various questions that require in-depth discussions and clarifications.

JOURNAL OF MANUFACTURING SYSTEMS (2021)

添加到收藏夹

Article Automation & Control Systems

FFCNN: A Deep Neural Network for Surface Defect Detection of Magnetic Tile

Luofeng Xie et al.

Summary: An intelligent system is developed to assess the surface quality of magnetic tiles before mounting, with an end-to-end CNN architecture FFCNN proposed for automatic defect identification. FFCNN consists of three modules for feature extraction, fusion, and decision-making, with an attention mechanism introduced to focus on more representative parts. Experimental results demonstrate the effectiveness and efficiency of the developed system for magnetic tile surface defect detection.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

添加到收藏夹

Article Engineering, Manufacturing

Verification of Numerically Controlled Manufacturing Processes, Toward Identifying Cyber-Physical Threats

Joseph R. Piacenza et al.

Summary: This research aims to enhance the cybersecurity of manufacturing systems by designing and fabricating a CNC machine evaluation device. By identifying anomalies in machining processes, potential risks can be recognized and future design iterations can be improved based on experimental results. Device designs for various CNC machine types have been proposed and validated using specific case studies.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2021)

添加到收藏夹

Article Automation & Control Systems

Joint Feature and Label Adversarial Network for Wafer Map Defect Recognition

Jianbo Yu et al.

Summary: This article introduces a novel semisupervised deep transfer learning algorithm called JFLAN, which significantly improves the accuracy of wafer defect recognition and enables online adaptive defect recognition.

IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Article Computer Science, Information Systems

Surface defect identification of Citrus based on KF-2D-Renyi and ABC-SVM

Aijiao Tan et al.

Summary: This paper proposed a method for citrus surface defect identification based on KF-2D-Renyi and ABC-SVM, which effectively detected and classified citrus surface defects by segmenting images and extracting features, achieving high recognition rates.

MULTIMEDIA TOOLS AND APPLICATIONS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

An End-to-End Steel Surface Defect Detection Approach via Fusing Multiple Hierarchical Features

Yu He et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2020)

添加到收藏夹

Article Engineering, Industrial

Automated defect inspection system for metal surfaces based on deep learning and data augmentation

Jong Pil Yun et al.

JOURNAL OF MANUFACTURING SYSTEMS (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Multilevel Information Fusion-Based Deep Learning Method for Vision-Based Defect Recognition

Yiping Gao et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2020)

添加到收藏夹

Article Chemistry, Physical

A Light-Weight Deep-Learning Model with Multi-Scale Features for Steel Surface Defect Classification

Yang Liu et al.

MATERIALS (2020)

添加到收藏夹

Article Engineering, Manufacturing

A Light-Weight Neural Network for Wafer Map Classification Based on Data Augmentation

Tsung-Han Tsai et al.

IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Generalized Completed Local Binary Patterns for Time-Efficient Steel Surface Defect Classification

Qiwu Luo et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2019)

添加到收藏夹

Article Engineering, Manufacturing

A Voting Ensemble Classifier for Wafer Map Defect Patterns Identification in Semiconductor Manufacturing

Muhammad Saqlain et al.

IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING (2019)

添加到收藏夹

Article Engineering, Industrial

Welding defects detection based on deep learning with multiple optical sensors during disk laser welding of thick plates

Yanxi Zhang et al.

JOURNAL OF MANUFACTURING SYSTEMS (2019)

添加到收藏夹

Editorial Material Engineering, Multidisciplinary

From Intelligence Science to Intelligent Manufacturing

Lihui Wang

ENGINEERING (2019)

添加到收藏夹

Article Engineering, Manufacturing

Enhanced Stacked Denoising Autoencoder-Based Feature Learning for Recognition of Wafer Map Defects

Jianbo Yu

IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

An evolutionary classifier for steel surface defects with small sample set

Mang Xiao et al.

EURASIP JOURNAL ON IMAGE AND VIDEO PROCESSING (2017)

添加到收藏夹

Article Engineering, Manufacturing

Wafer Map Failure Pattern Recognition and Similarity Ranking for Large-Scale Data Sets

Ming-Ju Wu et al.

IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING (2015)

添加到收藏夹

Article Automation & Control Systems

Multisensor Fusion System for Monitoring High-Power Disk Laser Welding Using Support Vector Machine

Deyong You et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2014)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.