☆ 4.5 Article

Effect of solidification rate on dendrite segregation and mechanical properties of Cu-15Ni-8Sn alloy prepared by directional solidification

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

On the dendrite deformation and evolution mechanism of Ni-based superalloy during directional solidification

Chao Chen et al.

Summary: In a novel casting with complex solidification path during directional solidification, investigations were conducted on dendritic growth through experiments and simulations. Different dendrite deformations were found in the side strip and the corner, caused by differential thermal shrinkage. Local strip deformation above each platform led to cumulative deviation of dendrite direction in the entire strip.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of Zr on microstructural evolution and mechanical property of Cu-15Ni-8Sn alloy

Junjia Zhang et al.

Summary: The addition of Zr significantly improves the microstructure and mechanical properties of Cu-Ni-Sn alloys by controlling dendritic morphology and changing the form of precipitation phases. The presence of Zr inhibits the formation of discontinuous precipitation, extends the aging window, and results in the optimal combination of properties for the alloy.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Chemistry, Physical

Evolution behavior of γ-D03 phase in Cu-15Ni-8Sn alloy and the corresponding effects on alloy property

Junjia Zhang et al.

Summary: This study systematically investigated the evolution behavior of the gamma-D0(3) phase in Cu-15Ni-8Sn alloy, revealing the direct formation of particulate gamma-D0(3) phase and the precipitation of lamellar and needlelike phases. After the solid-solution treatment, the gamma-D0(3) phase would re-nucleate at the grain boundary and grow during aging, forming discontinuous precipitation colonies. The addition of B effectively suppressed the formation of gamma-D0(3) phase, resulting in improved hardness and reduced electrical conductivity of the alloy.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

A comparative study of Cu-15Ni-8Sn alloy prepared by L-DED and L-PBF: Microstructure and properties

Jibing Wang et al.

Summary: In this paper, dense Cu-15Ni-8Sn alloy blanks were fabricated by laser-directed energy deposition (L-DED). The L-DED sample showed smaller grain size, finer microstructure, and better mechanical properties compared to the laser-powder bed fusion (L-PBF) sample, but with a lower cooling rate.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of as-cast structure refinement on heritability of mechanical properties for Cu-15Ni-8Sn alloys

Shunran Zhang et al.

Summary: This study reports a novel heredity phenomenon where the mechanical properties of thermo-mechanically processed Cu-15Ni-8Sn alloys were improved by refining the as-cast structure. The underlying mechanism of hereditary strengthening was carefully analyzed, showing that it is mainly attributed to the additional dislocation proliferation induced by structure refinement and accelerated precipitation effect on strengthening phases. The strengthening mode changes from grain refinement in as-cast state to dislocation and precipitation strengthening in aged alloys.

MATERIALS LETTERS (2022)

添加到收藏夹

Article Chemistry, Physical

Effect of Different Mo Addition on Microstructure and Mechanical Properties of Cu-15Ni-8Sn Alloy

Kai Zhang et al.

Summary: In this study, Mo was added to Cu-15Ni-8Sn alloy to improve its service performance. The addition of Mo improved the as-cast structure, reduced segregation and Cu-Mo phase precipitates on the surface. Mo partially dissolved into the matrix during solution treatment and effectively inhibited the discontinuous precipitation of Sn. The alloy's hardness remained high even after long-time aging.

MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Effect of yttrium on the cellular precipitation kinetics, grain growth behavior and mechanical properties of high strength Cu-15Ni-8Sn alloy

Jinjuan Cheng et al.

Summary: The addition of yttrium to Cu-15Ni-8Sn alloy affects the grain growth and mechanical properties, resulting in increased strength and hardness.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Chemistry, Physical

Enhanced softening resistance and mechanical properties of Cu-Ni-Sn alloy with Al, Zn and Si micro-alloying

Chengjun Guo et al.

Summary: Microalloying with Al, Zn, and Si was investigated for its effects on the microstructure, physical properties, and softening resistance of Cu-Ni-Sn alloy. The results showed that the addition of Al, Zn, and Si effectively suppressed the segregation of the alloy, resulting in increased hardness and softening temperature. The presence of Al and Zn solute atoms and the formation of Ni31Si12 phase inhibited discontinuous precipitation formation and dislocation movement, leading to excellent mechanical properties and softening resistance in the alloy.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hot isostatic pressing of Cu-15Ni-8Sn alloy with suppressed Sn macro-segregation and enhanced mechanical properties

Jikang Li et al.

Summary: The use of hot isostatic pressing (HIP) technique in the fabrication of Cu-15Ni-8Sn alloy helps alleviate or eliminate macro-segregation and coarse grains issues, resulting in nearly fully dense samples with simultaneous strength-plasticity enhancement.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

The effect of homogenization temperature on the microstructure and high temperature mechanical performance of SLM-fabricated IN718 alloy

Ming Cao et al.

Summary: This study investigated the microstructure and mechanical performances of Inconel 718 at elevated temperature, utilizing heat treatment methods to regulate the microstructure and optimize mechanical properties. The results showed that heat-treated samples exhibited superior creep rupture performance and tensile strength compared to wrought samples, with a specific heat treatment scheme yielding the best mechanical properties at 650 degrees C.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Recrystallization behavior and mechanical properties of a Cu-15Ni-8Sn(P) alloy during prior deformation and aging treatment

Yufan Shi et al.

Summary: The study revealed that cold deformation affects the aging process of Cu-15Ni-8Sn and Cu-15Ni-8Sn-0.2P alloys, with the joint effects of DP and recrystallization leading to mechanical property deterioration, where DP has a more significant impact. The addition of P in the alloy inhibits recrystallization reactions and enhances hardness and yield strength.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Engineering, Mechanical

Selective laser melting of Cu-Ni-Sn: A comprehensive study on the microstructure, mechanical properties, and deformation behavior

Chao Zhao et al.

Summary: A comprehensive understanding of the deformation behavior and strengthening mechanism of the selective laser melted (SLM) alloy is crucial for maximizing the potential of the SLM process. This study focuses on the impact of SLM on the microstructure, deformation behavior, and mechanical properties of Cu-Ni-Sn alloy compared to their cast counterparts (CC). The SLM microstructure, characterized by increased dislocation density, offers a superior combination of tensile strength and ductility, mainly attributed to grain refinement, dispersed precipitation, and increased dislocation density.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Directional Solidification of AlSi7Fe1 Alloy Under Forced Flow Conditions: Effect of Intermetallic Phase Precipitation and Dendrite Coarsening

Haijie Zhang et al.

Summary: Experimental results show that a forced flow, induced by a rotating magnetic field, can influence the solidification microstructure of metal alloys by modifying the coarsening/ripening law. The presence of intermetallic precipitates can block the flow effect in some technical alloys. Model simulations suggest that this forced flow reduces mushy zone thickness, induces central segregation channels, and affects the distribution of intermetallic precipitates, influencing dendrite coarsening and interdendritic flow.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of P addition on spinodal decomposition and discontinuous precipitation in Cu-15Ni-8Sn alloy

Chengjun Guo et al.

Summary: The microstructure and phase transformations of Cu-15Ni-8Sn alloy can be influenced by a minor addition of phosphorus, resulting in the formation of the hexagonal Ni10SnP3 phase. The addition of phosphorus increases the atomic size factor, promoting spinodal decomposition and ordering in the alloy.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure evolution, Cu segregation and tensile properties of CoCrFeNiCu high entropy alloy during directional solidification

Huiting Zheng et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Suppression of discontinuous precipitation in age-hardening Cu-15Ni-8Sn alloy by addition of V

Zhongkai Guo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Solidification Characteristics and Segregation Behavior of Cu-15Ni-8Sn Alloy

Zhongkai Guo et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Optimization of strength and ductility in an as-extruded Cu-15Ni-8Sn alloy by the additions of Si and Ti

Chao Zhao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Inhibition of discontinuous precipitation and enhanced properties of Cu-15Ni-8Sn alloy with Fe addition

Chengjun Guo et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

A low Sn content Cu-Ni-Sn alloy with high strength and good ductility

Baomin Luo et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cu-Ni-Sn-Si alloys designed by cluster-plus-glue-atom model

Q. X. Yu et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure, mechanical properties and aging behaviour of nanocrystalline copper-beryllium alloy

Ivan Lomakin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of Si and Ti on dynamic recrystallization of high-performance Cu-15Ni-8Sn alloy during hot deformation

Chao Zhao et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of Nb addition on the microstructures and mechanical properties of a precipitation hardening Cu-9Ni-6Sn alloy

Minqiang Gao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Age-hardening behavior and microstructure of Cu-15Ni-8Sn-0.3Nb alloy prepared by powder metallurgy and hot extrusion

Yi Ouyang et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)

添加到收藏夹

Article Chemistry, Physical

Improving the Mechanical Properties of Cu-15Ni-8Sn Alloys by Addition of Titanium

Chao Zhao et al.

MATERIALS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Heat Transfer Model of Directional Solidification by LMC Process for Superalloy Casting Based on Finite Element Method

Liu Cao et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Stability of dendrite growth during directional solidification in the presence of a non-axial thermal field

J. D. Miller et al.

ACTA MATERIALIA (2014)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Spinodal copper alloy C72900-new high strength antifriction alloy system

W. R. Cribb et al.

CANADIAN METALLURGICAL QUARTERLY (2011)

添加到收藏夹

Article Engineering, Industrial

Research in spray forming technology and its applications in metallurgy

GZ Jing et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.