相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。
Article
Engineering, Environmental
Qingguan Wu et al.
Summary: This study assessed the carbon footprint of maize production under different agricultural management practices and scenarios, considering future climate impacts and clean energy use. The results showed that residue returning plays a critical role in reducing the carbon footprint of maize.
RESOURCES CONSERVATION AND RECYCLING
(2023)
Article
Engineering, Environmental
Kai Zhang et al.
Summary: The study reveals that China's power system will achieve near zero emissions by 2052 and reach negative carbon emissions of 225 million tons per year by 2060 under the carbon neutrality commitment. This will be achieved through the integration of high-share renewable energy and the deployment of disruptive technologies. The installed capacity of coal power cofiring with biomass will be 230GW, while biomass power equipped with carbon capture will have an installed capacity of 102GW. These efforts will result in a reduction of 30.32 billion tons of CO2 emissions during the 2021-2060 period, with contributions from demand-side management, new energy storage, cross-region power transmission, and carbon capture technology.
RESOURCES CONSERVATION AND RECYCLING
(2023)
Review
Agricultural Engineering
Rajendiran Naveenkumar et al.
Summary: The consumption of energy has increased with economic growth, leading to a higher demand for renewable energy sources. This review examines the utilization of Municipal Solid Waste (MSW) for the production of biofuels and biochemicals using energy-efficient technologies. The challenges and risk assessment in the sorting and transportation of MSW are analyzed, along with the impact of MSW on the environment. Additionally, strategies for energy production and waste management in a circular bioeconomy are discussed.
BIORESOURCE TECHNOLOGY
(2023)
Article
Green & Sustainable Science & Technology
Xiaotian Ma et al.
Summary: This study conducted an impact-oriented environmental footprint assessment of ceramic tile production, focusing on the energy, carbon, and water footprints. The results showed that these footprints have significant impacts on human health, ecosystem quality, and resources. Carbon, water degradation, and energy footprints were found to dominate the damage on these protection targets. Optimizing the energy system was identified as the most urgent action.
JOURNAL OF CLEANER PRODUCTION
(2022)
Article
Construction & Building Technology
Arturs Riekstins et al.
Summary: This article evaluates the sustainability parameters of crumb rubber modified asphalt and concludes that a longer service life is needed for it to be more sustainable in terms of energy consumption, global warming potential, and costs.
CONSTRUCTION AND BUILDING MATERIALS
(2022)
Article
Green & Sustainable Science & Technology
Mattia Costamagna et al.
Summary: This study evaluates the environmental impacts of a thermo-mechanical devulcanization process for recycling EPDM waste using twin-screw extruders. The main environmental hotspot identified is energy consumption, but overall, the process helps reduce the environmental burden of rubber products throughout their lifecycle.
JOURNAL OF CLEANER PRODUCTION
(2022)
Article
Environmental Sciences
Tianzuo Zhang et al.
Summary: This study analyzes the application prospects of ground source heat pump (GSHP) systems based on a life cycle assessment and costing method. The results show that GSHP systems have environmental and economic benefits compared to coal-based heating, with a significant reduction in environmental impact and external costs. The study also provides recommendations to improve the performance of GSHP systems.
JOURNAL OF ENVIRONMENTAL MANAGEMENT
(2022)
Article
Engineering, Environmental
Wei Bi et al.
Summary: This research analyzes the issues in construction waste management and proposes strategies to optimize waste collection and transportation. The simulation results show that optimal facility choice is the most effective strategy, and combining the three strategies achieves the best optimization effects.
RESOURCES CONSERVATION AND RECYCLING
(2022)
Article
Energy & Fuels
H. Monteiro et al.
Summary: This study assesses the impact of end-of-life material recovery on the life cycle energy and carbon emissions of a new product, and finds that incorporating recycled materials can significantly reduce CO2 emissions and primary energy consumption. The supply chain processes and material production have a greater environmental impact than product manufacturing.
Article
Green & Sustainable Science & Technology
Rui He et al.
Summary: Increasing municipal solid waste (MSW) generation is a major sustainability challenge and financial burden for municipalities worldwide. However, it also presents an opportunity to promote a circular economy. This study aims to provide access to current MSW data by establishing a comprehensive framework for understanding different aspects of MSW knowledge. By analyzing existing databases and governmental reports, the study generates insights into the complex nature of solid waste management systems (SWMS) and offers evidence-based decision-making tools for researchers and policymakers. The findings highlight the positive drivers towards achieving the United Nations Sustainable Development Goal 12, such as economic development, density factors, sustainability initiatives, education, and regulation.
JOURNAL OF CLEANER PRODUCTION
(2022)
Article
Engineering, Environmental
Paulina Wisniewska et al.
Summary: Waste tire management is a major global environmental issue, and finding low-cost and industrial-scale tire recycling methods is gaining more attention. The sustainable development of rubber devulcanization technologies and the appropriate design of cradle-to-cradle loops for rubber goods are considered promising strategies for achieving a higher level of rubber recycling. This work presents an overview of patented waste tire rubber devulcanization technologies and discusses their performance characteristics, environmental aspects, and limitations. The findings show that the reclaimed rubbers described in patents have higher tensile strength and elongation break compared to literature data or commercial products, with significant differences attributed to devulcanization efficiency and rubber treatment conditions. Considering environmental and economic aspects, reactive extrusion is identified as the most promising method for further developing rubber devulcanization technologies.
Article
Chemistry, Physical
Clemens Mostert et al.
Summary: The construction industry has a significant impact on global warming and resource consumption. Carbon concrete (CC), a composite material made of concrete and carbon fibers, shows lower footprints compared to steel-reinforced concrete (SC) over its entire life-cycle, especially in terms of material and building levels. The use of carbon fibers allows for reduced cement and aggregate consumption, resulting in decreased environmental impacts.
Review
Green & Sustainable Science & Technology
Mehrdad Seifali Abbas-Abadi et al.
Summary: End-of-life tires are currently not being effectively recycled, with most being incinerated or landfilled. However, processes such as retreading, pulverization, and devulcanization show promise for tire recycling. The use of supercritical carbon dioxide (sc-CO2) pulverization and solvent extraction can improve recycling efficiency. Pyrolysis of tires and the production of activated carbon are also important methods for tire recovery.
JOURNAL OF CLEANER PRODUCTION
(2022)
Article
Green & Sustainable Science & Technology
Boling Zhang et al.
Summary: This study aims to explore the long-term effects of clean coal technology policies (CCTPs) in China. By analyzing changes in air quality and the relationship between air quality and socioeconomic factors, the study found that after the implementation of CCTPs, there was an improvement in air quality, with a 2-year time lag. In addition, emission reduction and deindustrialization were identified as promising approaches to improve air quality and promote energy transformation.
JOURNAL OF CLEANER PRODUCTION
(2022)
Article
Green & Sustainable Science & Technology
Haibin Li et al.
Summary: The study found that desulfurized rubber powder (DRP) and styrene-butadiene-styrene (SBS) composite modified asphalt is a cheap, clean, and high-performance modifier. The material has good physical properties and road performance, and can reduce fume emissions. In addition, it significantly reduces the emissions of harmful gases such as SO2 and NO2, which is of great significance for road construction and environmental protection.
JOURNAL OF CLEANER PRODUCTION
(2022)
Article
Environmental Sciences
J. Z. Li et al.
Summary: In order to achieve the net-zero ambition by 2060, China needs to accelerate low-carbon transition, especially in the power system. This study develops a multi-region power system risk management model to analyze the effects of renewable energy development and inter-regional electricity transmission on carbon neutrality.
Article
Chemistry, Physical
Biaohua Chen et al.
Summary: With the rapid growth of passenger cars in China, waste passenger car tires have become one of the fastest growing solid wastes. This study investigates the current disposal capacity of the pyrolysis method for waste passenger car tires and predicts the future total number of waste tires based on car growth rate and disposal capacity. Additionally, an evaluation of pyrolysis on 15 collected waste tires was conducted, revealing the limitations and the potential of a new pyrolysis technology.
GREEN ENERGY & ENVIRONMENT
(2022)
Article
Agronomy
Yijie Zhai et al.
Summary: This study conducted an impact-oriented water footprint analysis to quantify the environmental burdens of crop production in China, finding that the main environmental burdens come from direct consumption, fertilizer production, and diesel production. The overall burdens increased steadily from 2008 to 2015 and then declined in 2016, with agricultural economic scale and crop productivity being the largest positive and negative contributors to burden growth. High-high agglomerations of burdens were mostly located in regions with superior natural resource endowments and dense population, suggesting the need for water-saving technologies and eco-friendly production methods in these areas.
AGRICULTURAL WATER MANAGEMENT
(2021)
Article
Engineering, Environmental
Houbao Hu et al.
Summary: The Chinese government is working on establishing a comprehensive system to promote the utilization of end-of-life tires, with a focus on developing unified standards for 4R products in end markets and promoting tax incentives policies. It is also crucial to have a coordinating organization to manage all related stakeholders. Developing statistical mechanisms for end-of-life tires is both urgent and fundamental for long-term management.
RESOURCES CONSERVATION AND RECYCLING
(2021)
Article
Engineering, Environmental
Jing-Li Fan et al.
Summary: Carbon capture utilization and storage (CCUS) is seen as crucial for deep CO2 reduction in China's power sector. The study found that saline aquifers and oil fields in major sedimentary basins have enormous storage potential, with transport distance being a key factor affecting CO2 sequestration.
RESOURCES CONSERVATION AND RECYCLING
(2021)
Article
Environmental Sciences
Kornelia Osieczko et al.
Summary: The article discusses the issue of electric vehicles and infrastructure in EU road transport, indicating that the lack of charging stations may be a reason for slow growth in sales of electric vehicles. Additionally, a strong correlation is found between a country's GDP and the number of charging stations available.
JOURNAL OF ENVIRONMENTAL MANAGEMENT
(2021)
Review
Polymer Science
Harika Chittella et al.
Summary: Rubber waste management is a global issue with current measures found to be inadequate. Devulcanized or degraded rubber can be reused, recycled, or used for energy recovery in various applications. This review discusses alternatives to manage rubber waste through thermal, mechanical, physical, chemical, and biological methods, addressing the advantages, disadvantages, and bottlenecks present in each method.
POLYMER DEGRADATION AND STABILITY
(2021)
Review
Engineering, Environmental
Wahid Ferdous et al.
Summary: The paper critically reviews the issues of tyre, plastic, and glass landfill waste globally. It emphasizes the inadequate recycling rates and the environmental problems caused by waste landfilling. The importance of finding new strategies for waste utilization is highlighted, along with a summary of global and country-specific production, recycling, and landfill rates.
RESOURCES CONSERVATION AND RECYCLING
(2021)
Article
Engineering, Environmental
Haike Qiao et al.
Summary: The study establishes a game-theoretic model to discuss the impact of government subsidies on remanufacturing activities and industry competition. The results indicate that government subsidies may lead to a decrease in profits and consumer surplus for OEMs and IRs in competitive markets, as well as a decrease in total social surplus. The total environmental impact depends on the relative environmental impact of each unit of remanufactured products.
Article
Environmental Sciences
Yuru Guan et al.
Summary: Energy and emission data are crucial for climate change research and mitigation efforts, with accurate energy statistics being essential for mitigation strategies and evaluating low carbon energy transition efforts. This study provides updated emission inventories for China and its provinces for 2018 and 2019, while also updating CO2 emission inventories based on revised energy statistics since 2012.
Article
Green & Sustainable Science & Technology
Yongxi Yi et al.
Summary: This study proposes a new Extended Producer Responsibility system (FEPR) that can simultaneously save resources, reduce waste pollution, and improve social welfare. Through game analysis and data example analysis, it is found that the optimal joint tax-subsidy policy and market competition can drive the development and efficiency of the FEPR system.
SUSTAINABLE PRODUCTION AND CONSUMPTION
(2021)
Article
Agricultural Engineering
Moonmoon Hiloidhari et al.
Summary: The study assesses the life cycle energy, carbon and water footprint of sugarcane based products in India, demonstrating that electricity has the highest energy return on investment among the bioproducts. The findings could lead to improved sustainability of sugarcane bioproducts in India.
BIORESOURCE TECHNOLOGY
(2021)
Article
Environmental Sciences
Changxing Ji et al.
Summary: The study found that the main environmental impacts of rapeseed oil production come from the direct cultivation processes and the indirect processes of transportation and fertilizer/diesel production. Adjusting industrial layout, improving cultivation in low-yield areas, and reducing pesticide use in the hilly regions of southern China can effectively reduce environmental effects.
JOURNAL OF ENVIRONMENTAL MANAGEMENT
(2021)
Article
Green & Sustainable Science & Technology
Qing-Zhou Wang et al.
JOURNAL OF CLEANER PRODUCTION
(2020)
Article
Engineering, Environmental
Xu Peng et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY
(2020)
Article
Green & Sustainable Science & Technology
Michel Xocaira Paes et al.
JOURNAL OF CLEANER PRODUCTION
(2020)
Article
Energy & Fuels
Elizabeth Markert et al.
Article
Green & Sustainable Science & Technology
Michel Xocaira Paes et al.
JOURNAL OF CLEANER PRODUCTION
(2020)
Article
Green & Sustainable Science & Technology
Yiduo Yang et al.
JOURNAL OF CLEANER PRODUCTION
(2020)
Article
Engineering, Environmental
Caijie Liu et al.
Article
Engineering, Environmental
Sylwia Guzdek et al.
JOURNAL OF ECOLOGICAL ENGINEERING
(2020)
Review
Environmental Sciences
Navarro Ferronato et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH
(2019)
Article
Green & Sustainable Science & Technology
Soojin Yoon et al.
JOURNAL OF CLEANER PRODUCTION
(2019)
Article
Green & Sustainable Science & Technology
Arul Arulrajah et al.
JOURNAL OF CLEANER PRODUCTION
(2019)
Article
Green & Sustainable Science & Technology
Qiang Xu et al.
JOURNAL OF CLEANER PRODUCTION
(2019)
Review
Green & Sustainable Science & Technology
Chew Tin Lee et al.
CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY
(2018)
Article
Green & Sustainable Science & Technology
Congcong Qi et al.
JOURNAL OF CLEANER PRODUCTION
(2018)
Article
Environmental Sciences
Monzur Alam Imteaz et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH
(2018)
Proceedings Paper
Materials Science, Paper & Wood
M. Nuzaimah et al.
WOOD AND BIOFIBER INTERNATIONAL CONFERENCE (WOBIC 2017)
(2018)
Editorial Material
Engineering, Environmental
Mark A. J. Huijbregts et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT
(2017)
Article
Engineering, Environmental
Gregor Wernet et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT
(2016)
Article
Green & Sustainable Science & Technology
Yanlu Zhang et al.
JOURNAL OF CLEANER PRODUCTION
(2016)
