☆ 4.5 Article

Prediction of the mechanical performance of compressed circular CFST columns with circumferential debonding gap

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Construction & Building Technology

Confinement-based direct design of circular steel tube confined concrete (STCC) short columns

M. F. Hassanein et al.

Summary: This paper proposes a new design model to estimate the axial compressive resistance of circular steel tube confined concrete (STCC) short columns. The model takes into account the confinement effect of the outer steel tube on the concrete core. Experimental results show that most design codes are conservative, while most analytical design models are unconservative. Based on the experimental results, a new formula is proposed to evaluate the lateral confining pressure (frp) provided by the steel tube to the concrete core of different grades, and a confinement-based direct resistance design model is proposed.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2023)

添加到收藏夹

Article Construction & Building Technology

Behaviour and design of eccentrically loaded CFST columns with high strength materials and slender sections

Tan-Trac Nguyen et al.

Summary: This study investigates the performance of eccentrically loaded CFST columns with high strength materials and slender sections through experiments and numerical analysis. A new numerical model is proposed and a parametric study is conducted to explore the performance of composite columns under different conditions. The load-moment interaction curves of specimens are compared to multiple design specifications for validation.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2022)

添加到收藏夹

Article Engineering, Civil

Axial loading mechanism analyses and evaluation methods of CCFT short columns with gap defects

Qihan Shen et al.

Summary: This study investigated the impact of gap defects on the axial loading performance of CCFT short columns and found that the appearance of gap defects significantly weakened or delayed the contact behavior between the infilled concrete and the hollow tube, affecting the axial resistance of the CCFT short columns. Design approaches using confinement regionalization and circumferential expansion thoughts were proposed to accurately evaluate the load bearing capacities of the axially-compressed CCFT short columns with gap defects.

STRUCTURES (2022)

添加到收藏夹

Article Engineering, Civil

Probabilistic axial capacity model for concrete-filled steel tubes accounting for load eccentricity and debonding

Alessandro Contento et al.

Summary: This paper proposes a physics-based probabilistic model to predict the ultimate axial capacity of CFST columns, taking into account the effects of load eccentricity and debonding. The accuracy of the proposed model is compared with existing capacity equations and uncertainty factors are provided for design applications. The models are suitable to be included in technical standards and can be updated with new experimental data.

ENGINEERING STRUCTURES (2022)

添加到收藏夹

Article Engineering, Civil

Simplified equivalent finite element modelling of concrete-filled steel tubular K-joints with and without studs

Marco Filippo Ferrotto et al.

Summary: This paper investigates the structural performances of CFST K-joints with and without steel studs, and proposes a predictive tool based on the Finite Element Method (FEM). By discussing the key parameters and calibrating the FE models, reliable predictions of the load-displacement/strain response and strength of CFST K-joints can be achieved.

ENGINEERING STRUCTURES (2022)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Evolutionary Polynomial Regression Algorithm Enhanced with a Robust Formulation: Application to Shear Strength Prediction of RC Beams without Stirrups

Sebastiano Marasco et al.

Summary: The paper introduces a technique called EPR for calibrating mathematical models in engineering problems, utilizing evolutionary polynomial regression method that combines genetic algorithms and regression techniques to establish more accurate mathematical models and limit the impact of data bias. Adopting various robust techniques and combining genetic algorithms and the Akaike weight method to evaluate the optimal polynomial model.

JOURNAL OF COMPUTING IN CIVIL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Civil

Experimental study on circular steel tube-confined reinforced UHPC columns under axial loading

Jiangang Wei et al.

Summary: This study investigates the compressive behavior of circular steel tube-confined reinforced ultra high-performance concrete columns through experiments. The addition of steel fibers significantly improves the strength and ductility of the columns. A new formula for predicting the bearing capacity of STCRU columns is provided, overcoming limitations of existing specifications.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Effect of Circumferential Gap on Dynamic Performance of CFST Arch Bridges

Chao Guo et al.

Summary: Recent research discovered that circumferential gaps around steel-concrete interfaces in CFST arch bridges in China, exacerbated by harsh environments, significantly decrease arch rib stiffness and impact overall bridge dynamic performance. Finite element analysis and model experiments were used to determine the effect of these gaps on member tangent stiffness and bridge dynamic features. A determination system was proposed for studying the impact of interface circumferential gaps on rib member stiffness and the dynamic characteristics of the bridge.

JOURNAL OF BRIDGE ENGINEERING (2021)

添加到收藏夹

Article Construction & Building Technology

Air void and ring gap effect on CFST arch bridges dynamic performance

Zhengran Lu et al.

Summary: The study investigated the tangential stiffness of CFST arch bridge rib structures through finite element analysis and experimental verification, in order to evaluate the influences of these defects on the dynamic performance of bridges.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2021)

添加到收藏夹

Article Construction & Building Technology

Behaviour and design of high strength CFST columns with slender sections

Tan-Trac Nguyen et al.

Summary: This study experimentally explores the behavior of high strength concrete-filled steel tube columns under concentric loading, evaluates their performance and develops numerical models for predicting mechanical properties. The research establishes a new equation and optimizes the section of CFST columns to improve performance and cost savings.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2021)

添加到收藏夹

Article Engineering, Civil

Prediction of ultimate load capacities of CFST columns with debonding by EPR

Jun-Qing Xue et al.

Summary: The study emphasizes the importance of conducting more experimental tests on circular CFST columns with debonding to understand the combined influence of various parameters on the ultimate load capacities. Additionally, it suggests further research on the influence of arc-length ratio and thickness of circumferential debonding gap on the reduction coefficient. The study also highlights the need for more accurate formulations for predicting the real resistance of CFST structures.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Construction & Building Technology

Experimental Behavior and Design of High-Strength Circular Concrete-Filled Steel Tube Short Columns

Jiangang Wei et al.

JOURNAL OF STRUCTURAL ENGINEERING (2020)

添加到收藏夹

Article Engineering, Marine

Determination of Semi-Empirical Models for Mean Wave Overtopping Using an Evolutionary Polynomial Paradigm

Corrado Altomare et al.

JOURNAL OF MARINE SCIENCE AND ENGINEERING (2020)

添加到收藏夹

Article Construction & Building Technology

Air Void and Cap Gap Composite Defects of Concrete-Filled Steel-Tube Arch Bridge Transverse Brace

Chao Guo et al.

JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2020)

添加到收藏夹

Article Construction & Building Technology

Concrete-filled steel tubular columns: Test database, design and calibration

Son Thai et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2019)

添加到收藏夹

Article Engineering, Civil

Structural behaviour and reliability of CFST trusses with random initial imperfections

Silin Chen et al.

THIN-WALLED STRUCTURES (2019)

添加到收藏夹

Article Mechanics

Circumferential gap and partial debonding effects on buckling loads and modes of slender CFST circular columns

Simon Schnabl et al.

ACTA MECHANICA (2019)

添加到收藏夹

Article Construction & Building Technology

Experimental study on joint resistance and failure modes of concrete filled steel tubular (CFST) truss girders

Wenjin Huang et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2018)

添加到收藏夹

Article Engineering, Civil

Experimental study on seismic performance of latticed CFST-RC column connected with RC web

Raghabendra Yadav et al.

THIN-WALLED STRUCTURES (2018)

添加到收藏夹

Review Engineering, Multidisciplinary

Concrete-Filled Steel Tube Arch Bridges in China

Jielian Zheng et al.

ENGINEERING (2018)

添加到收藏夹

Article Engineering, Geological

Seismic response prediction of reinforced concrete buildings through nonlinear combinations of intensity measures

Alessandra Fiore et al.

BULLETIN OF EARTHQUAKE ENGINEERING (2018)

添加到收藏夹

Article Engineering, Civil

Strength, stiffness and ductility of concrete-filled steel columns under axial compression

Zhi-Bin Wang et al.

ENGINEERING STRUCTURES (2017)

添加到收藏夹

Article Construction & Building Technology

Experimental investigation of the flexural behavior of CFST trusses with interfacial imperfection

Yong-Hui Huang et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2017)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Evolutionary Polynomial Regression-Based Statistical Determination of the Shear Capacity Equation for Reinforced Concrete Beams without Stirrups

Alessandra Fiore et al.

JOURNAL OF COMPUTING IN CIVIL ENGINEERING (2016)

添加到收藏夹

Article Construction & Building Technology

Axial and lateral stress-strain model for concrete-filled steel tubes

A. K. H. Kwan et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2016)

添加到收藏夹

Article Construction & Building Technology

Effects of Core Concrete Initial Imperfection on Performance of Eccentrically Loaded CFST Columns

Lin-Hai Han et al.

JOURNAL OF STRUCTURAL ENGINEERING (2016)

添加到收藏夹

Article Construction & Building Technology

Effects of Core Concrete Initial Imperfection on Performance of Eccentrically Loaded CFST Columns

Lin-Hai Han et al.

JOURNAL OF STRUCTURAL ENGINEERING (2016)

添加到收藏夹

Article Construction & Building Technology

Experimental study on K-joints of concrete-filled steel tubular truss structures

Wenjin Huang et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2015)

添加到收藏夹

Article Engineering, Civil

Shaking table tests for the evaluation of the seismic performance of an innovative lightweight bridge with CFST composite truss girder and lattice pier

Yufan Huang et al.

ENGINEERING STRUCTURES (2014)

添加到收藏夹

Article Construction & Building Technology

Developments and advanced applications of concrete-filled steel tubular (CFST) structures: Members

Lin-Hai Han et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2014)

添加到收藏夹

Article Construction & Building Technology

Finite element modelling of concrete-filled steel stub columns under axial compression

Zhong Tao et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2013)

添加到收藏夹

Article Construction & Building Technology

Numerical analysis of the axially loaded concrete filled steel tube columns with debonding separation at the steel-concrete interface

Shiming Chen et al.

STEEL AND COMPOSITE STRUCTURES (2013)

添加到收藏夹

Article Engineering, Civil

Behaviour of CFST stub columns with initial concrete imperfection: Analysis and calculations

Fei-Yu Liao et al.

THIN-WALLED STRUCTURES (2013)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Predicting torsional strength of RC beams by using Evolutionary Polynomial Regression

Alessandra Fiore et al.

ADVANCES IN ENGINEERING SOFTWARE (2012)

添加到收藏夹

Article Construction & Building Technology

Effects of debonding on circular CFST stub columns

Jun-Qing Xue et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2012)

添加到收藏夹

Article Engineering, Civil

Behaviour of inclined, tapered and STS square CFST stub columns subjected to axial load

D. Lam et al.

THIN-WALLED STRUCTURES (2012)

添加到收藏夹

Article Engineering, Civil

Behaviour and design calculations on very slender thin-walled CFST columns

Yu-Feng An et al.

THIN-WALLED STRUCTURES (2012)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Modeling of permeability and compaction characteristics of soils using evolutionary polynomial regression

A. Ahangar-Asr et al.

COMPUTERS & GEOSCIENCES (2011)

添加到收藏夹

Article Construction & Building Technology

Behavior of CFST short column and beam with initial concrete imperfection: Experiments

Fei-Yu Liao et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2011)

添加到收藏夹

Article Construction & Building Technology

Experimental and Analytical Investigation of Concrete Filled Steel Tubular Columns

Zhijing Ou et al.

JOURNAL OF STRUCTURAL ENGINEERING-ASCE (2011)

添加到收藏夹

Article Engineering, Civil

Overview of Concrete Filled Steel Tube Arch Bridges in China

Bao-Chun Chen et al.

PRACTICE PERIODICAL ON STRUCTURAL DESIGN AND CONSTRUCTION (2009)

添加到收藏夹

Article Engineering, Civil

Performance of concrete-filled thin-walled steel tubes under pure torsion

Lin-Hai Han et al.

THIN-WALLED STRUCTURES (2007)

添加到收藏夹

Article Construction & Building Technology

Tests and calculations for hollow structural steel (HSS) stub columns filled with self-consolidating concrete (SCC)

LH Han et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2005)

添加到收藏夹

Article Economics

Bayesian analysis of stochastic volatility models with fat-tails and correlated errors

E Jacquier et al.

JOURNAL OF ECONOMETRICS (2004)

添加到收藏夹

Article Construction & Building Technology

Comparative strength analyses of concrete-encased steel composite columns

SA Mirza et al.

JOURNAL OF STRUCTURAL ENGINEERING (2004)

添加到收藏夹

Article Construction & Building Technology

Tests and mechanics model for concrete-filled SHS stub columns, columns and beam-columns

Lin-Hai Han et al.

STEEL AND COMPOSITE STRUCTURES (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.