☆ 4.7 Article

Oxygen vacancy regulation strategy in V-Nb mixed oxides catalyst for enhanced aerobic oxidative desulfurization performance

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

Porous phosphomolybdate-based poly(ionic liquid) hybrids with reversible water absorption for enhancement of oxidative desulfurization

Shao-Xu Mao et al.

Summary: This article reports a novel porous phosphomolybdate-based poly(ionic liquid) catalyst with 70% water (PDIM-PMo-W70%). The catalyst showed a turnover frequency (TOF) value of 41.15 h-1 for dibenzothiophene (DBT) removal, which was 35.47 and 9.92 times higher than that of HPMo and PDIM-PMo, respectively. The effects of water content, reaction temperature, H2O2/S molar ratio, catalyst dosage, and different sulfur-containing compounds on the oxidative desulfurization (ODS) performance were investigated in detail.

FUEL (2023)

添加到收藏夹

Article Chemistry, Physical

Defect enhanced CoMnNiOx catalysts derived from spent ternary lithium-ion batteries for low-temperature propane oxidation

Ganggang Li et al.

Summary: A feasible strategy was reported to develop efficient CoMnNiOx catalysts for propane oxidation using waste ternary lithium-ion batteries (TLIBs) as precursors. The defect enhanced-CoMnNiOx catalyst showed a low activation temperature for propane oxidation, which was achieved by increasing oxygen vacancy defects. Additionally, the defect enhancement improved the reducibility, acidity, and lattice oxygen mobility of the catalyst, thereby enhancing the catalytic activity. This study is of great significance for the development of green and efficient catalysts for VOCs oxidation.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

添加到收藏夹

Article Energy & Fuels

High-index planes T-Nb2O5 using self-assembly strategy for aerobic oxidative desulfurization in fuels

Zhendong Yu et al.

Summary: High-index planes in orthorhombic niobium pentoxide were synthesized for aerobic oxidative desulfurization, showing excellent catalytic performance at 650 degrees Celsius and stability after 8 regeneration cycles.

FUEL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Boosting nitrate electroreduction to ammonia on NbOxvia constructing oxygen vacancies

Xuefei Wan et al.

Summary: The first work on nitrate electroreduction to NH3 over Nb oxides was conducted using NbOx with oxygen vacancies (OVs). It was found that NbOx is a robust non-precious metal catalyst for NH3 synthesis, achieving a faradaic efficiency of 94.5% and an NH3 formation rate of 55.0 μg h(-1) mg(cat)(-1) in a neutral electrolyte. The excellent performance of NbOx is attributed to the intrinsic properties of Nb oxides and the presence of OVs in the catalyst.

GREEN CHEMISTRY (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Design strategies of supported metal-based catalysts for efficient oxidative desulfurization of fuel

Lei Chen et al.

Summary: This review summarizes the latest research progress on supported metal-based ODS catalysts, focusing on the design strategies for highly efficient catalysts and pointing out future development trends.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Physical

Ru-incorporated oxygen-vacancy-enriched MoO2 electrocatalysts for hydrogen evolution reaction

Chuang Li et al.

Summary: This paper successfully designs Ru/MoO2_x catalyst for the alkaline hydrogen evolution reaction, addressing the insufficient electrochemical activity of MoO2 and weak adsorption/dissociation abilities of Ru. The specific structure design incorporating Ru-O-Mo sites and oxygen-vacancy-enriched MoO2 enables the catalyst to exhibit excellent electrocatalytic activity.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

添加到收藏夹

Article Chemistry, Physical

Increasing the utilization of SiBeta support to anchor dual active sites of transition metal and heteropolyacids for efficient oxidative desulfurization of fuel

Lei Chen et al.

Summary: In this study, an increasing support utilization rate strategy is developed by introducing additional phosphotungstic acid on V anchored zeolite. The obtained catalyst exhibits outstanding catalytic performance toward oxidative desulfurization reaction and can adsorb and remove the products. Additionally, a series of efficient catalysts are prepared by adjusting the types of heteropolyacids and transition metals.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Preparation of Hollow Niobium Oxide Nanospheres with Enhanced Catalytic Activity for Oxidative Desulfurization

Yong Wang et al.

Summary: Hollow niobium oxide nanospheres were successfully synthesized using three-dimensional mesoporous carbon as a hard template, and they exhibited high catalytic activity in oxidative desulfurization.

NANOMATERIALS (2022)

添加到收藏夹

Article Chemistry, Analytical

Oxygen Vacancy-Dependent Chemiluminescence: A Facile Approach for Quantifying Oxygen Defects in ZnO

Jing Lei et al.

Summary: Defect engineering is an effective strategy to improve the catalytic activity of metal oxides. This study found that ZnO nanoparticles with oxygen vacancy can trigger a strong chemiluminescence, and the intensity of the chemiluminescence is strongly dependent on the oxygen vacancy of the nanoparticles. The oxygen vacancy-dependent chemiluminescence provides a rapid, low-cost, and easy-to-operate method for quantifying the oxygen defects in ZnO.

ANALYTICAL CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Physical

Steam-assisted strategy to fabricate Anatase-free hierarchical titanium Silicalite-1 Single-Crystal for oxidative desulfurization

Huan Wang et al.

Summary: In this study, hierarchical TS-1 single-crystals with enhanced catalytic performance were successfully synthesized, showing great potential in oxidative desulfurization reactions.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

添加到收藏夹

Article Engineering, Chemical

Electronic state tuning over Mo-doped W18O49 ultrathin nanowires with enhanced molecular oxygen activation for desulfurization

Jun Xiong et al.

Summary: Developing catalyst with abundant surface active sites is crucial for efficient catalytic oxidative desulfurization. This study fabricates Mo doped W18O49 ultrathin nanowires to provide plentiful low coordinated metal atoms and oxygen vacancies, resulting in improved oxidative desulfurization performance.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Physical

Enhanced Oxygen Activation Achieved by Robust Single Chromium Atom-Derived Catalysts in Aerobic Oxidative Desulfurization

Wei Jiang et al.

Summary: By using single-atom chromium catalysts on multiwalled carbon nanotubes, efficient oxidative desulfurization reactions have been achieved, with promising catalytic performance and cycling stability, providing a potential catalyst for sulfur removal in practical fuels.

ACS CATALYSIS (2022)

添加到收藏夹

Article Chemistry, Physical

Universal strategy engineering grain boundaries for catalytic oxidative desulfurization

Jun Xiong et al.

Summary: This study proposes a universal strategy to engineer grain boundaries into oxides via a facile two-step growth method, and applies grain boundaries to catalytic oxidative desulfurization reactions. Taking W18O49 nanowires as an example, the engineered grain boundaries can establish stronger interfacial molecular interactions with DBT, improving surface adsorption and activation performance, as well as enhancing molecular oxygen activation capacity.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

添加到收藏夹

Article Engineering, Environmental

Desulfurization mechanism of an excellent Cu/ZnO sorbent for ultra-deep removal of thiophene in simulated coke oven gas

Fanjing Wei et al.

Summary: The reactive adsorption desulfurization mechanism of thiophene over Cu/ZnO sorbent in coke oven gas (COG) was established by combining theoretical and experimental studies. The study found that Cu-0 nanoparticles in the sorbent play important roles in hydrogen adsorption and dissociation as well as cleaving the C-S bond of thiophene. ZnO in the sorbent acts as an excellent sulfur acceptor and greatly affects the adsorption properties by enhancing the spillover and storage of hydrogen atoms. Enhancing the interaction between Cu0 nanoparticles and ZnO is an effective way to improve the thiophene reactive adsorption activity of Cu/ZnO.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tungstovanadate-Based Ionic Liquid Catalyst [C2(MIM)2]2VW12O40 Used in Deep Desulfurization for Ultraclean Fuel with Simultaneous Recovery of the Sulfone Product

Xiao-Xiao Xing et al.

Summary: A new tungstovanadate compound has been prepared and converted into an ionic liquid catalyst, which shows high efficiency in sulfur removal and sulfone product selectivity in an oxidative desulfurization system. The structure-activity relationship and desulfurization mechanism of this catalyst have been studied theoretically and experimentally.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2022)

添加到收藏夹

Article Engineering, Environmental

Identifying the dominant effect of electron-feeding on molybdenum phosphonates to decipher the activity origin for oxidative desulfurization of fuel

Lei Chen et al.

Summary: This study demonstrates the importance of the electronic structure of active sites in the oxidative desulfurization process. By designing a hollow spherical molybdenum phosphonate catalyst with -OH functional groups, the researchers were able to modulate the electronic structure at the molecular level and accelerate the reaction. This research provides new inspiration for manipulating the nanostructures and electronic states of metal phosphonates for green catalysis.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Engineering, Environmental

A novel catalyst of nickel-loaded graphene decorated on molybdenum-alumina for the HDS of liquid fuels

Tawfik A. Saleh et al.

Summary: The study focused on the catalytic efficiency of the AlMoGNi catalyst for the HDS of DBT, synthesized by loading Ni promoter on graphene and Mo catalyst on alumina separately, and then combining Ni/graphene with Mo/alumina. The AlMoGNi catalyst showed superior performance in reducing sulfur concentration in fuel compared to catalyst without graphene, attributed to its textural properties, surface acidity, and nanoparticle dispersion. The HDS process over the AlMoGNi catalyst involved hydrogenolysis and hydrogenation desulfurization pathways.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Engineering, Environmental

Experimental study and mass transfer modelling for extractive desulfurization of diesel with ionic liquid in microreactors

Nan Jin et al.

Summary: The study focused on intensifying extractive desulfurization using microreactor, which succeeded in extracting aromatic heterocyclic sulfur compounds like dibenzothiophene from model diesel. The process achieved efficient desulfurization in a shorter time, with the extraction modeled based on a two-film model and investigation into the mechanisms for improved performance at higher temperatures or larger IL to MD flow ratios.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Applied

Efficient oxidative desulfurization over highly dispersed molybdenum oxides supported on mesoporous titanium phosphonates

Lei Chen et al.

Summary: Mesoporous titanium phosphonates (MTP) were synthesized as support for molybdenum oxides in oxidative desulfurization (ODS) reactions. The electron-donating effect of organophosphonate ligands on Mo active sites led to high electron density, improving the efficiency and stability of ODS reactions.

MICROPOROUS AND MESOPOROUS MATERIALS (2021)

添加到收藏夹

Article Energy & Fuels

In situ fabrication of hollow silica confined defective molybdenum oxide for enhanced catalytic oxidative desulfurization of diesel fuels

Wei Jiang et al.

Summary: In this study, a hollow silica confined defective molybdenum oxide catalyst was successfully prepared, demonstrating higher activity and desulfurization efficiency compared to a solid silica-supported catalyst. Oxygen defects were found to play a positive role in promoting oxidation reactions, and the catalyst exhibited good stability and selectivity, making it a promising candidate for industrial applications.

FUEL (2021)

添加到收藏夹

Article Energy & Fuels

Co-Fe-Mo mixed metal oxides derived from layered double hydroxides for deep aerobic oxidative desulfurization

Ya Song et al.

Summary: In this study, CoFeMo mixed metal oxides (MMOs) were successfully synthesized as a robust and durable catalyst for aerobic oxidative desulfurization (AODS) of fuel. The catalytic performance can be regulated by altering the intercalation content of MoO42-, and the optimal catalyst efficiently converts various thiophenic compounds into sulfones at 100 degrees C, showing excellent reusability. This research provides a feasible method to synthesize highly efficient MMO catalysts for AODS of fuels.

FUEL (2021)

添加到收藏夹

Article Chemistry, Physical

Dispersed Ni-Mo sulfide catalysts from water-soluble precursors for HDS of BT and DBT via in situ produced H2 under Water gas shift conditions

A. V. Vutolkina et al.

Summary: The Ni-Mo catalysts formed through high-temperature decomposition of water-soluble metal precursors in invert sulfur-containing emulsions showed high HDS activity under various reaction conditions, and can be reused multiple times in sulfur-assisted HDS processes.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

添加到收藏夹

Article Engineering, Chemical

Controlling the bidirectional chemical environments for high-performance Y@silicalite-1 core-shell composites in shape selective desulfurization

Chao Yang et al.

Summary: This study focused on synthesizing a high-performance Y@silicalite-1 core-shell composite for shape-selective adsorption desulfurization. By controlling the chemical environments, a maximum sulfur adsorption capacity of 75.58 mg(s)/g(adsorbents) was achieved, more than double the previous best reported capacity. Additionally, the regeneration capability was effectively improved by ethanol extraction, maintaining a high desulfurization rate level at more than 92% even after 6 cycles.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Chemical

Deep desulfurization and denitrogenation of diesel fuel over Ir/ Pr-N-CQDs-TiO2 under ultraviolet radiation

Lei Wang et al.

Summary: By doping N, CQDs, Ir, and Pr in TiO2, the prepared Ir/Pr-N-CQDs-TiO2 exhibited excellent desulfurization and denitrogenation activity, with much higher turnover frequencies compared to other catalysts, and desulfurization and denitrogenation ratios reaching very high levels.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Molybdenum Dioxide Nanoparticles Anchored on Nitrogen-Doped Carbon Nanotubes as Oxidative Desulfurization Catalysts: Role of Electron Transfer in Activity and Reusability

Juncong Zou et al.

Summary: The electron transfer between metal-oxides and supports greatly impacts the performance of catalysts in oxidative desulfurization (ODS), with molybdenum dioxide with oxygen vacancies (V-O-MoO2) catalysts anchored on electron-rich nitrogen-doped carbon nanotubes (NC) showing excellent ODS activity and reusability. By promoting dispersion of V-O-MoO2 and reducing the bond energy of the Mo-O bond, the strong electron-donating effect of NC on V-O-MoO2 enhances exposure of active sites and enriches oxygen vacancies, leading to effective desulfurization.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Molybdenum nitride@porous carbon, derived from phosphomolybdic acid loaded metal-azolate framework-6: A highly effective catalyst for oxidative desulfurization

Md Mahmudul Hassan Mondol et al.

Summary: A new composite material named PMA(x) @MAF-6 was prepared by combining metal-azolate framework (MAF-6) with phosphomolybdic acid (PMA). Mo2N, dispersed on porous carbon without external nitrogen sources, was obtained by carbonization of PMA(x)@MAF-6. The catalyst Mo2N@C showed remarkable performance in oxidative desulfurization (ODS) with H2O2 as an oxidant, with high turnover frequency and low activation energy.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

添加到收藏夹

Article Engineering, Environmental

Dynamically-generated TiO2 active site on MXene Ti3C2: Boosting reactive desulfurization

Jing He et al.

Summary: Ti3C2 MXene with dynamically-generated TiO2 active site shows enhanced catalytic oxidative desulfurization performance, attributed to its abundant interface engineering and loosely layered structure. The expanded slit layer in Ti3C2 MXene provides more pores and cavities for accelerated mass transfer, leading to efficient removal of sulfides in diesel. Additionally, the dynamically-generated active sites from continuous activation of molecular oxygen and Ti3C2 MXene play a key role in enhancing the catalytic activity.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Physical

Scalable and facile synthesis of V2O5 nanoparticles via ball milling for improved aerobic oxidative desulfurization

Yiru Zou et al.

Summary: In this study, V2O5 nanoparticles with oxygen vacancies were successfully prepared using a facile ball milling strategy, showing remarkable sulfur removal efficiency for fuel oils, with sulfur removal reaching up to 99.7%.

GREEN ENERGY & ENVIRONMENT (2021)

添加到收藏夹

Article Chemistry, Physical

Oxygen vacancies enhance the lithium ion intercalation pseudocapacitive properties of orthorhombic niobium pentoxide

Songmin Zhang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

添加到收藏夹

Article Engineering, Environmental

Oxygen vacancy induced performance enhancement of toluene catalytic oxidation using LaFeO3 perovskite oxides

Mudi Wu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Engineering, Environmental

Atomic heterojunction-induced electron interaction in P-doped g-C3N4 nanosheets supported V-based nanocomposites for enhanced oxidative desulfurization

Lei Chen et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Metal-Organic Frameworks Towards Desulfurization of Fuels

Leiduan Hao et al.

TOPICS IN CURRENT CHEMISTRY (2020)

添加到收藏夹

Article Chemistry, Physical

Tuning the electrophilicity of vanadium-substituted polyoxometalate based ionic liquids for high-efficiency aerobic oxidative desulfurization

Ming Zhang et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2020)

添加到收藏夹

Article Chemistry, Applied

3D-printing of integrated spheres as a superior support of phosphotungstic acid for deep oxidative desulfurization of fuel

Jie Zhu et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

添加到收藏夹

Article Chemistry, Physical

Magnetic-heteropolyacid mesoporous catalysts for deep oxidative desulfurization of fuel: The influence on the amount of APES used

Si-Wen Li et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

添加到收藏夹

Article Engineering, Environmental

Mechanical exfoliation of boron carbide: A metal-free catalyst for aerobic oxidative desulfurization in fuel

Peiwen Wu et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

添加到收藏夹

Article Physics, Applied

Distribution and concentration of surface oxygen vacancy of TiO2and its photocatalytic activity

Tianqi Cao et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2020)

添加到收藏夹

Article Chemistry, Applied

Vacuum degassed treatment for fabricating quasi-MIL-125(Ti) with enhanced catalytic oxidative desulfurization activity

Xiaoyuan Liao et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2020)

添加到收藏夹

Article Engineering, Environmental

Facet Engineered α-MnO2 for Efficient Catalytic Ozonation of Odor CH3SH: Oxygen Vacancy-Induced Active Centers and Catalytic Mechanism

Chun He et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Oxygen vacancy engineering with flame heating approach towards enhanced photoelectrochemical water oxidation on WO3 photoanode

Chenyi Shao et al.

NANO ENERGY (2020)

添加到收藏夹

Review Chemistry, Physical

Oxygen Defects in Promoting the Electrochemical Performance of Metal Oxides for Supercapacitors: Recent Advances and Challenges

Xiyue Zhang et al.

SMALL METHODS (2020)

添加到收藏夹

Article Materials Science, Ceramics

VNb9O25 nanowires with superior electrochemical property towards lithium ion batteries

Cheng Jiang et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Engineering, Environmental

Synthesis of Bi2WO6 with gradient oxygen vacancies for highly photocatalytic NO oxidation and mechanism study

Wang Chen Huo et al.

CHEMICAL ENGINEERING JOURNAL (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Lattice-Refined Transition-Metal Oxides via Ball Milling for Boosted Catalytic Oxidation Performance

Jing He et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

Cellulose nanocrystal shelled with poly(ionic liquid)/polyoxometalate hybrid as efficient catalyst for aerobic oxidative desulfurization

Huawei Yang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

Crystal-plane-dependent metal oxide-support interaction in CeO2/g-C3N4 for photocatalytic hydrogen evolution

Weixin Zou et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Taming electronic properties of boron nitride nanosheets as metal-free catalysts for aerobic oxidative desulfurization of fuels

Linjie Lu et al.

GREEN CHEMISTRY (2018)

添加到收藏夹

Article Physics, Multidisciplinary

Fundamental Resolution of Difficulties in the Theory of Charged Point Defects in Semiconductors

Yu-Ning Wu et al.

PHYSICAL REVIEW LETTERS (2017)

添加到收藏夹

Article Engineering, Chemical

The Selectivity for Sulfur Removal from Oils: An Insight from Conceptual Density Functional Theory

Hongping Li et al.

AICHE JOURNAL (2016)

添加到收藏夹

Article Chemistry, Physical

Flux Crystal Growth and the Electronic Structure of BaFe12O19 Hexaferrite

V. V. Atuchin et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2016)

添加到收藏夹

Article Chemistry, Physical

Active Sites on Ti-Ce Mixed Metal Oxides for Reactive Adsorption of Thiophene and Its Derivatives: A DFT Study

Siddarth Sitamraju et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2015)

添加到收藏夹

Article Chemistry, Physical

Template-free synthesis of mesoporous X-Mn (X = Co, Ni, Zn) bimetal oxides and catalytic application in the room temperature removal of low-concentration NO

Zhu Shu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

添加到收藏夹

Article Chemistry, Physical

Intrinsic vacancies in cubic-zirconia bulk and surface

Pei Jun Shen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

添加到收藏夹

Article Spectroscopy

Determination of the V2p XPS binding energies for different vanadium oxidation states (V5+ to V0+)

G Silversmit et al.

JOURNAL OF ELECTRON SPECTROSCOPY AND RELATED PHENOMENA (2004)

添加到收藏夹

Article Chemistry, Applied

Reactivity of V/Nb mixed oxides in the oxidehydrogenation of propane under co-feed and under redox-decoupling conditions

N Ballarini et al.

CATALYSIS TODAY (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanism of resistance degradation of lead magnesium Niobate-based ferroelectrics induced by hydrogen reduction during electroplating

JL Cao et al.

JOURNAL OF MATERIALS SCIENCE (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.