☆ 4.6 Article

Effect of chain extender content on tribological properties of polyurethane under water-lubrication

JOURNAL OF APPLIED POLYMER SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Green & Sustainable Science & Technology

Experimental study on treatment of mixed ion exchange resins by supercritical water gasification

Le Wang et al.

Summary: Supercritical water gasification offers an efficient and clean treatment for spent ion exchange resins, with high temperature, low concentration, K2CO3 catalyst addition, and long residence time promoting the gasification result. The carbon gasification efficiency reached 97.2% at 750 degrees C with 10 wt% concentration and K2CO3 catalyst addition. The main organic component residues in the liquid products were identified, and the reaction pathways and distributions of sulfur and nitrogen were discussed.

JOURNAL OF CLEANER PRODUCTION (2023)

添加到收藏夹

Review Green & Sustainable Science & Technology

Bio-based resins with tannin and hydroxymethylfurfural derived high-yield carbon for Zn-ion hybrid supercapacitors

Shuxin Zhou et al.

Summary: A green and simple method is developed to fabricate tannin-HMF-derived resin and further pyrolyze it to obtain carbon materials with high carbon yield and high C--C to C-O ratio. The Zinc ion hybrid supercapacitor demonstrates a considerable discharge capacity of 107 mAh·g-1 at 1 A·g-1 and a decent rate capability of 54.6% at 10 A·g-1. This study provides an environmentally friendly and simple route for bio-based carbon materials with high carbon yield for energy storage.

JOURNAL OF CLEANER PRODUCTION (2023)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Selective gold recovery from pregnant thiocyanate leach solution using ion exchange resins

Atefeh Azizitorghabeh et al.

Summary: This study investigates the selective recovery of gold over copper from synthetic and real thiocyanate pregnant leach solution (PLS) using ion exchange resins. The results demonstrate that 100 g/L MTA 5011 resin can achieve 99% gold extraction and 12% copper extraction, while a solution of 0.01 M thiourea (TU) and 0.1 M H2SO4 is the most efficient for gold elution with 70% gold and 4% copper recovery.

HYDROMETALLURGY (2023)

添加到收藏夹

Article Engineering, Mechanical

Carbon felt/nitrogen-doped graphene/paraffin wax 3D skeleton regulated tribological performances of the MCPA6 composites: A novel strategy of oil embedding and transporting

Hongyu Liu et al.

Summary: A novel carbon felt/nitrogen-doped reduced graphene oxide/paraffin wax ternary skeleton (CF/N-RGO/PW) is developed to enhance the tribological performances of monomer casting nylon-6 (MCPA6). The CF/N-RGO/PW skeleton exhibits a pond and ditch structure for the efficient storage and transportation of paraffin wax, resulting in significantly reduced friction coefficient and wear loss compared to neat MCPA6. Theoretical calculations support the efficient adsorption of paraffin wax onto N-RGO.

TRIBOLOGY INTERNATIONAL (2023)

添加到收藏夹

Article Engineering, Environmental

Room-temperature self-healing supramolecular polyurethanes based on the synergistic strengthening of biomimetic hierarchical hydrogen-bonding interactions and coordination bonds

Jing Xu et al.

Summary: In this study, a series of updated supramolecular polyurethanes were successfully synthesized by incorporating hierarchical hydrogen-bonding motifs into the polymer matrix and subsequently coordinated with Zn(2+) ions. The resulting supramolecular elastomers exhibited superior mechanical properties compared to previously reported room-temperature self-healing materials. Additionally, a bilayer polymer film with a gradient distribution was fabricated, which achieved rapid self-healing at ambient temperature.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Review Materials Science, Multidisciplinary

Progress in the graphitization and applications of modified resin carbons

Ping-jun Yang et al.

Summary: Resin carbons have favorable properties but are difficult to graphitize. Recent research focuses on increasing graphitization by adding catalysts and carbon nanomaterials. The addition of catalysts can achieve 74% graphitization at temperatures below 1,400 degrees C, while carbon nanomaterials can achieve graphitization above 2,000 degrees C.

NEW CARBON MATERIALS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Transparent, self-recoverable, highly tough, puncture and tear resistant polyurethane supramolecular elastomer with fast self-healing capacity via hard-soft hard domain design

Kangming Xu et al.

Summary: By designing a hard-soft-hard domain in supramolecular elastomers, using quadruple hydrogen bonds (HBs) in the mainchain as restriction units and single HBs in the side chain as diffusion units, the elastomer exhibited fast self-recoverability and superior mechanical properties.

RSC ADVANCES (2022)

添加到收藏夹

Article Chemistry, Physical

Green synthesis of DyBa2Fe3O7.988/DyFeO3 nanocomposites using almond extract with dual eco-friendly applications: Photocatalytic and antibacterial activities

Makarim A. Mahdi et al.

Summary: In this study, photocatalytical and antibacterial activities of DyBa2Fe3O7.988/DyFeO3 (Dy-Ba-Fe-O) nanocomposites were investigated as eco-friendly applications. The synthesis method chosen was ultrasound technique to ensure low energy consumption and achieve a pure product with good crystallinity. Natural almond core extract was used as a green reagent. The nanocomposite exhibited a band gap of 2.6 eV, enabling visible-light photocatalysis. Significant degradation of Rhodamin-B dye and strong antibacterial activity against Gram-negative pathogens were observed. The properties of the nanocomposite were characterized by various analyses.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Engineering, Mechanical

Development of gradient structural composite for improving tribological performance of PU material in water-lubricated bearings

Jiazhen Chen et al.

Summary: This study achieved a gradient structural design for polyurethane by adding high thermal-conductivity wire into water-lubricated bearing material. The results showed that the metal wire effectively transferred heat and reduced sample temperature, and the formed surface film effectively reduced the friction coefficient, thus improving the thermal conductivity and wear resistance of the material.

TRIBOLOGY INTERNATIONAL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Molecularly Engineered Unparalleled Strength and Supertoughness of Poly(urea-urethane) with Shape Memory and Clusterization-Triggered Emission

Xiaoyue Wang et al.

Summary: Ultrastrong and supertough shape-memory poly(urea-urethane) material with excellent durability and fluorescence properties is fabricated through molecular engineering.

ADVANCED MATERIALS (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review of chemical recycling and reuse of carbon fiber reinforced epoxy resin composites

Zi-shang Tian et al.

Summary: The methods of chemical recycling of CFRCs have been investigated, and the synthesis and depolymerization mechanism of recyclable thermosetting resins by the insertion of reversible chemical bonds have been explored. This research is of great significance for the recycling and reuse of CFRCs.

NEW CARBON MATERIALS (2022)

添加到收藏夹

Article Materials Science, Ceramics

Dy2BaCuO5/Ba4DyCu3O9.09 S-scheme heterojunction nanocomposite with enhanced photocatalytic and antibacterial activities

Seyede Raheleh Yousefi et al.

Summary: Semiconductor heterogeneous photocatalysis involving Dy2BaCuO5/Ba4DyCu3O9.09 nanocomposites shows great potential in enhancing photocatalytic performance and antimicrobial activity against various bacterial strains.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Engineering, Mechanical

Insight into the tribological performance of polyurethane composites under high temperature water lubrication

Qiren Huang et al.

Summary: This study investigated the tribological performance of PU-PEW composite materials under high-temperature conditions, finding that PEW can improve the friction properties of PU and reduce wear mass loss. The results provide an experimental basis for material selection in water-lubricated bearings under high-temperature and high-load conditions.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Textiles

Understanding the Effect of Halloysite Nanotubes Addition Upon the Mechanical Properties of Glass Fiber Aluminum Laminate

Ammar A. Melaibari et al.

Summary: The study found that 1 wt. % of HNTs had the maximum impact on the mechanical properties of GLARE, with a decrease in effect as the wt. % of HNTs increased. GLARE filled with 3 wt. % of HNTs showed lower tensile, flexural, in-plane shear, and interlaminar shear properties compared to the original GLARE, but higher bearing strength and impact strength.

FIBERS AND POLYMERS (2021)

添加到收藏夹

Article Chemistry, Physical

Synthesis, characterization and application of Co/Co3O4 nanocomposites as an effective photocatalyst for discoloration of organic dye contaminants in wastewater and antibacterial properties

Seyede Raheleh Yousefi et al.

Summary: The synthesis of Co/Co3O4 nanocomposites and their photocatalytic and antimicrobial activities were investigated in this study, confirming the synthesis through systematic characterization methods. The antibacterial activity and photocatalytic activity of the nano-catalysts were evaluated against clinical pathogens and organic colors, showing strong efficacy against gram-negative microorganisms.

JOURNAL OF MOLECULAR LIQUIDS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Zwitterionic Polyurethane Nanoporous Device with Low Foreign-Body Response for Islet Encapsulation

Qingsheng Liu et al.

Summary: The ZPU encapsulation device is developed with sulfobetaine groups in the polymer backbone, offering superior properties for cell encapsulation therapies with efficient mass transfer and prevention of cell escape. It has demonstrated therapeutic potential for islet encapsulation and treating diabetes, showing low foreign-body response and high biological compatibility.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Engineering, Mechanical

Effect of polyester fiber orientation on the tribological properties of ultrahigh molecular weight polyethylene composites for water lubrication

Yang He et al.

Summary: The addition of polyester fibers (PETF) can improve the ultimate flexural strength and reduce the friction coefficient of ultrahigh molecular weight polyethylene (UHMWPE) composites. Composites with fibers oriented along the axial direction perform better than randomly-oriented fiber composites (ROFC) and can solve the high wear volume problem.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Engineering, Mechanical

Analysis of the influence of small quantity secondary lubricant on water lubrication

Xiaohan Zhang et al.

Summary: Through experiments, it was found that injecting a small amount of secondary lubricating medium into the contact region under water-lubricated conditions can reduce the coefficient of friction and improve lubrication performance.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Green sonochemical synthesis of BaDy2NiO5/Dy2O3 and BaDy2NiO5/NiO nanocomposites in the presence of core almond as a capping agent and their application as photocatalysts for the removal of organic dyes in water

Seyede Raheleh Yousefi et al.

Summary: This study reported the sonochemical synthesis of DBNO NC and investigated its optical, electrical, magnetic, and photocatalytic properties. The effects of various factors on the photocatalytic activity were studied, showing that increasing the amount of catalyst and decreasing the dye concentration enhanced the photocatalytic activity of the nanocomposite. The degradation activity of AR14 was higher than that of AB92, and both dyes showed higher photocatalytic degradation under UV irradiation compared to visible light.

RSC ADVANCES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Performance Polymeric Materials through Hydrogen-Bond Cross-Linking

Pingan Song et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Materials Science, Characterization & Testing

Effect of modified glass fiber on tribological performance of water-lubricated bearing

Xiang Liang et al.

POLYMER TESTING (2020)

添加到收藏夹

Article Chemistry, Physical

Optimization of the Production of Enzymatic Biodiesel from Residual Babassu Oil (Orbignya sp.) via RSM

Katerine S. Moreira et al.

CATALYSTS (2020)

添加到收藏夹

Article Engineering, Mechanical

Investigations of the static and dynamic characteristics of water-lubricated hydrodynamic journal bearing considering turbulent, thermohydrodynamic and misaligned effects

Huihui Feng et al.

TRIBOLOGY INTERNATIONAL (2019)

添加到收藏夹

Article Engineering, Mechanical

Tribological behavior of aged UHMWPE under water-lubricated condition

Tie Chang et al.

TRIBOLOGY INTERNATIONAL (2019)

添加到收藏夹

Article Acoustics

Control sonochemical parameter to prepare pure Zn0.35Fe2.65O4 nanostructures and study their photocatalytic activity

Seyede Rahele Yousefi et al.

ULTRASONICS SONOCHEMISTRY (2019)

添加到收藏夹

Article Engineering, Mechanical

Influence of polyethylene wax on wear resistance for polyurethane composite material under low speed water-lubricated conditions

Zumin Wu et al.

WEAR (2019)

添加到收藏夹

Article Chemistry, Physical

Hydrothermal synthesis of DyMn2O5/Ba3Mn2O8 nanocomposite as a potential hydrogen storage material

Seyede Raheleh Yousefi et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

添加到收藏夹

Article Polymer Science

High-Performance Lignin-Containing Polyurethane Elastomers with Dynamic Covalent Polymer Networks

Weifeng Liu et al.

MACROMOLECULES (2019)

添加到收藏夹

Article Engineering, Mechanical

Study on influence of Koch snowflake surface texture on tribological performance for marine water-lubricated bearings

Tie Chang et al.

TRIBOLOGY INTERNATIONAL (2019)

添加到收藏夹

Article Engineering, Mechanical

Study on influencing factors of lubrication performance of water-lubricated micro-groove bearing

Jiayu Gong et al.

TRIBOLOGY INTERNATIONAL (2019)

添加到收藏夹

Article Polymer Science

Study on the tribological properties of modified polyurethane material for water-lubricated stern bearing

Shaoli Jiang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2018)

添加到收藏夹

Article Engineering, Mechanical

Insight into tribological problems of green ship and corresponding research progresses

Yuwei Sun et al.

FRICTION (2018)

添加到收藏夹

Article Engineering, Mechanical

Experimental comparison between the Stribeck curves of water lubricated rubber bearing with straight and spiral grooves

Guangwu Zhou et al.

INDUSTRIAL LUBRICATION AND TRIBOLOGY (2018)

添加到收藏夹

Article Materials Science, Textiles

Evaluation of mechanical properties of jute/glass/carbon fibers reinforced hybrid composites

M. A. Abd El-baky

FIBERS AND POLYMERS (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Toughening elastomers using mussel-inspired iron-catechol complexes

Emmanouela Filippidi et al.

SCIENCE (2017)

添加到收藏夹

Article Engineering, Mechanical

Investigating relationship between deformation behaviours and stick-slip phenomena of polymer material

Conglin Dong et al.

WEAR (2017)

添加到收藏夹

Article Engineering, Mechanical

Influence of both friction and wear on the vibration of marine water lubricated rubber bearing

Huanjie Wang et al.

WEAR (2017)

添加到收藏夹

Article Engineering, Mechanical

Study on tribological properties of novel biomimetic material for water-lubricated stern tube bearing

Zhiwei Guo et al.

WEAR (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

High Modulus, Strength, and Toughness Polyurethane Elastomer Based on Unmodified Lignin

Hui Li et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

Progress in bio-inspired sacrificial bonds in artificial polymeric materials

Xinxin Zhou et al.

CHEMICAL SOCIETY REVIEWS (2017)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Operational stabilities of different chemical derivatives of Novozym 435 in an alcoholysis reaction

Maria Villalba et al.

ENZYME AND MICROBIAL TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Mechanical

Experimental research on water lubricated three layer sliding bearing with lubrication grooves in the upper part of the bush and its comparison with a rubber bearing

Wojciech Litwin

TRIBOLOGY INTERNATIONAL (2015)

添加到收藏夹

Article Biochemistry & Molecular Biology

Stabilizing hyperactivated lecitase structures through physical treatment with ionic polymers

Jose C. S. dos Santos et al.

PROCESS BIOCHEMISTRY (2014)

添加到收藏夹

Review Chemistry, Multidisciplinary

On the Versatility of Urethane/Urea Bonds: Reversibility, Blocked Isocyanate, and Non-isocyanate Polyurethane

Etienne Delebecq et al.

CHEMICAL REVIEWS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Monotonic properties of unidirectional glass fiber (U)/random glass fiber (R)/epoxy hybrid composites

A. I. Selmy et al.

MATERIALS & DESIGN (2011)

添加到收藏夹

Article Polymer Science

A comparison of hydrogen bonding and order in a polyurethane and poly(urethane-urea) and their blends with poly(ethylene glycol)

Jason Mattia et al.

MACROMOLECULES (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.