期刊
JOURNAL OF APPLIED POLYMER SCIENCE
卷 -, 期 -, 页码 -出版社
WILEY
DOI: 10.1002/app.54584
关键词
carbon filler materials; composite bipolar plates; conductive polymer composites; PEM fuel cells
This study investigates the effect of surface-enhanced flake graphite (SEFG) as a novel filler material in composite bipolar plates (BPs) for Proton Exchange Membrane Fuel Cells (PEMFC). The results show that the composite BP developed with epoxy resin as the binder and SEFG, carbon black, and natural flake graphite as conductive fillers exhibits favorable electrical conductivity, flexural strength, corrosion resistance, and thermal conductivity.
The requirement for a lightweight bipolar plate (BP) for Proton Exchange Membrane Fuel Cell (PEMFC) is increasing to make it feasible to power hydrogen fuel cell electric vehicles. Composite BP with carbon materials as conductive fillers and polymer as the binder are preferable over pure graphite and metallic BP. This study investigates the effect of Surface-enhanced flake graphite (SEFG) as a novel filler material in composite BP. A composite BP is developed with Epoxy Resin (ER) as the binder and Natural Flake Graphite (NFG), Carbon Black (CB) and SEFG as conductive fillers. Composite BP fabricated with 10 vol % SEFG, 10 vol% CB, and 40 vol% NFG exhibited an electrical conductivity of 158 S cm(-1), flexural strength of 38 MPa, water contact angle of 90.41(0) and corrosion current density of 0.261 mu A cm(-2). The composite BP also achieved a density of 1.55 g cm(-3), water absorption of 0.6% and thermal conductivity of 3.6 W m(-1) K-1 at 120 degrees C. These results are highly favorable for BPs used in PEMFC. This paper provides an insight into using surface-modified conductive carbon filler materials to develop composite BP for application in PEMFC.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据