☆ 4.6 Article

Tailoring the performance of poly(lactic acid)-based reactive blends: The effect of vinyl acetate and dicumyl peroxide content

JOURNAL OF APPLIED POLYMER SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Polymer Science

Mechanical, rheological, and crystallinity properties of polylactic acid/polyethylene glycol-polydimethylsiloxane copolymer blends by melt blending

Wenying Shi et al.

Summary: Polyethylene glycol-polydimethylsiloxane copolymer (PEG-PDMS) was incorporated into polylactic acid (PLA) via melt blending to improve its toughness and transparency, resulting in increased elongation at break and tensile strength, as well as enhanced crystallinity. Additionally, the energy storage modulus and complex viscosity of the blends were improved. However, the light transmittance slightly decreased.

JOURNAL OF APPLIED POLYMER SCIENCE (2023)

添加到收藏夹

Article Polymer Science

Design of biodegradable PLA/PBAT blends with balanced toughness and strength via interfacial compatibilization and dynamic vulcanization

Xiaonan Chen et al.

Summary: Super-toughened and high-strength PLA/PBAT blends were successfully prepared by interfacial compatibilization and dynamic vulcanization with small amounts of ESA. The compatibilization was achieved by grafting PLA and PBAT chains onto ESA backbones, generating PLA-graft-PBAT copolymers at the blend interface. The vulcanization led to highly cross-linked PBAT particles with a network-like distribution in the PLA matrix, resulting in improved toughness and strength.

POLYMER (2023)

添加到收藏夹

Article Materials Science, Composites

Physical, mechanical, viscoelastic, and morphological properties of poly(lactic acid)/ethylene-co-vinyl acetate blend reinforced with silicon carbide nanoparticles

Sahar Arezoumand et al.

Summary: This study investigated the phase morphology, mechanical properties, melting and crystallinity, as well as the dynamic viscoelastic properties of PLA/EVA (80/20) blends containing 0-3 wt% nano-SiC. The addition of nano-SiC resulted in a decrease in the size of the EVA dispersed phase and an increase in the elastic moduli and yield stress of the nanocomposites. The nano-SiC particles also acted as nucleating agents for the crystallization of the PLA matrix. The changes in the properties of the nanocomposites were attributed to the alteration in phase morphology and physical interactions between the nano-SiC particles and blend components.

POLYMER COMPOSITES (2023)

添加到收藏夹

Article Chemistry, Applied

Characterization and performance of silicone modified Polylactic acid (PLA)-graphene nanoplatelet ink coatings for flexible elastomeric substrates

Emilie Forestier et al.

Summary: A polylactic acid-graphene nanoplatelets based ink dispersion was developed to prepare conductive coatings for porous and non-porous elastomeric surfaces. The coatings showed good conductivity and stability during stretch-release cycles.

PROGRESS IN ORGANIC COATINGS (2023)

添加到收藏夹

Article Chemistry, Applied

Use of crosslinking agent to produce high-performance PLA/EVA blends via reactive processing

Eduardo da Silva Barbosa Ferreira et al.

Summary: By using ethylene-vinyl acetate copolymer (EVA) and dicumyl peroxide (DCP) as a crosslinking agent, PLA/EVA blends were successfully produced. The addition of DCP significantly improved the impact strength and elongation at break of the blends, resulting in super-tough materials. This promising result, comparable to engineering polymers and blends, is attributed to the in situ compatibilizer PLA-g-EVA, which resulted in a homogeneous morphology as evidenced by SEM images.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2023)

添加到收藏夹

Article Polymer Science

Production of PLA/NR blends compatibilized with EE-g-GMA and POE-g-GMA: an investigation of mechanical, thermal, thermomechanical properties and morphology

Edson Antonio dos Santos Filho et al.

Summary: Blends of poly(lactic acid) (PLA) and natural rubber (NR) were modified by elastomeric ethylene grafted with glycidyl methacrylate (EE-g-GMA) and poly(ethylene octene) grafted with glycidyl methacrylate(POE-g-GMA) to enhance the toughness of PLA. The addition of 10% NR increased the impact strength by 77%. Incorporating 10% of EE-g-GMA and POE-g-GMA in the blends resulted in significant increases in impact strength, with gains of 256% and 250% respectively. The developed blends exhibited ductile behavior, and the thermal stability was maintained.

JOURNAL OF POLYMER RESEARCH (2023)

添加到收藏夹

Article Materials Science, Characterization & Testing

Micromechanical analysis and fracture mechanics of Poly(lactic acid) (PLA)/Polycaprolactone (PCL) binary blends

Laura Aliotta et al.

Summary: This study investigates the influence of PCL content on the micromechanical deformation processes and fracture mechanisms of PLA/PCL blends. Dilatometric uniaxial tests and SEM analysis were used to analyze the deformation behavior and morphology of the blends.

POLYMER TESTING (2023)

添加到收藏夹

Article Energy & Fuels

A comparison of evolution of adhesion mechanisms and strength post damp-heat aging for a range of VA content in EVA encapsulant with photovoltaic backsheet

Umang Desai et al.

Summary: This study investigated the change in adhesion strength for different ethylene vinyl acetate (EVA) films with varying vinyl acetate (VA) content after damp-heat ageing. It was found that the adhesion strength improved for EVA with 18% VA content, but deteriorated for EVA with 33% and 40% VA content after ageing. However, the adhesion strength remained unaffected for EVA with 24% VA content after ageing.

SOLAR ENERGY (2022)

添加到收藏夹

Article Polymer Science

Tailoring Poly(lactic acid) (PLA) Properties: Effect of the Impact Modifiers EE-g-GMA and POE-g-GMA

Edson Antonio dos Santos Filho et al.

Summary: In this study, POE-g-GMA and EE-g-GMA were used as impact modifiers to improve the properties of PLA. The addition of 10% EE-g-GMA and POE-g-GMA significantly increased the impact strength of PLA, resulting in higher crystallinity for the blends. The modifiers POE-g-GMA and EE-g-GMA also improved the thermal stability of the blends.

POLYMERS (2022)

添加到收藏夹

Article Biochemistry & Molecular Biology

Poly (lactic acid) blends with excellent low temperature toughness: A comparative study on poly (lactic acid) blends with different toughening agents

Shiling Jia et al.

Summary: PLA blends with different toughening agents were prepared, and the addition of GEBMA greatly improved its toughness at low temperature, showing reinforcement and super ductility. The main factors affecting the toughness of the blends were Tg and interfacial bonding.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

添加到收藏夹

Article Engineering, Environmental

Annealing Effect on Pla/Eva Blends Performance

Eduardo da Silva Barbosa Ferreira et al.

Summary: The research found that blending EVA and annealing treatment can significantly improve the performance of polylactic acid (PLA), including increased crystallinity, higher elastic modulus and hardness, but at the expense of reduced elongation at break. The co-continuity of phases observed with 30% EVA addition demonstrates that these methods can provide better performance and wider application range for PLA compounds.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2022)

添加到收藏夹

Article Polymer Science

Diisocyanate-Induced Dynamic Vulcanization of Difunctional Fatty Acids toward Mechanically Robust PLA Blends with Enhanced Luminescence Emission

Hongzhi Liu et al.

Summary: In this study, a facile and universal dynamic vulcanization strategy was developed to fabricate mechanically robust PLA blends. By adjusting the ratio of two monomers, the phase structure of PLA blends can be transformed and achieve extraordinary impact toughness.

MACROMOLECULES (2022)

添加到收藏夹

Article Engineering, Environmental

Feasibility of Manufacturing Disposable Cups using PLA/PCL Composites Reinforced with Wood Powder

Wallisson Alves da Silva et al.

Summary: The study successfully developed PLA/PCL composites with wood powder as reinforcement, which showed higher impact strength and hardness suitable for manufacturing disposable cups. High concentrations of wood powder did not severely compromise the material properties, although losses were observed in elastic modulus and tensile strength.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2021)

添加到收藏夹

Article Polymer Science

Super toughed poly (lactic acid)/poly (ethylene vinyl acetate) blends compatibilized by ethylene-methyl acrylate-glycidyl methacrylate copolymer

Mengmeng Wang et al.

Summary: In this study, super toughened PLA-based blends were successfully prepared by melt blending PLA with EVA and compatibilizing with E-MA-GMA. The addition of E-MA-GMA promoted phase adhesion and increased interface thickness, resulting in a super-toughened blend with incomplete fracture behavior during impact tests. The maximum impact strength of 77.6 kJ/m(2) was achieved with 12 wt% E-MA-GMA in the ternary blend, showing a 27.7 times improvement over neat PLA. Rheological and micromorphology analysis demonstrated enhanced viscosity and reduced crystallinity in the ternary blends.

POLYMER DEGRADATION AND STABILITY (2021)

添加到收藏夹

Article Physics, Applied

ANNEALING EFFICACY ON PLA. INSIGHTS ON MECHANICAL, THERMOMECHANICAL AND CRYSTALLINITY CHARACTERS

Carlos B. B. Luna et al.

Summary: This study investigated the effects of thermal annealing on the mechanical and thermomechanical properties of PLA. Annealing at 80, 90, and 100 degrees Celsius improved the mechanical and thermomechanical properties of PLA, enhancing the performance of products for the 3D printing industry.

MOMENTO-REVISTA DE FISICA (2021)

添加到收藏夹

Article Chemistry, Applied

Low-Density Polyethylene/Poly(Lactic Acid) Blends Reinforced by Waste Wood Flour

B. Boubekeur et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Environmental

A novel strategy to construct co-continuous PLA/NBR thermoplastic vulcanizates: Metal-ligand coordination-induced dynamic vulcanization, balanced stiffness-toughness and shape memory effect

Jiarong Huang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Engineering, Chemical

Facile Preparation of Supertoughened Polylactide-Based Thermoplastic Vulcanizates without Sacrificing the Stiffness Based on the Selective Distribution of Silica

Jiarong Huang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

添加到收藏夹

Article Materials Science, Characterization & Testing

Bio-based ethylene-co-vinyl acetate/poly (lactic acid) thermoplastic vulcanizates with enhanced mechanical strength and shape memory behavior

Hai-Chen Zhang et al.

POLYMER TESTING (2020)

添加到收藏夹

Article Polymer Science

Crystallization Morphology Regulation on Enhancing Heat Resistance of Polylactic Acid

Yufei Liu et al.

POLYMERS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tailored PCL/Macaiba fiber to reach sustainable biocomposites

D. D. Siqueira et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Engineering, Chemical

Improvement of Compatibility and Mechanical Performances of PLA/PBAT Composites with Epoxidized Soybean Oil as Compatibilizer

Yi Han et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

添加到收藏夹

Article Materials Science, Characterization & Testing

Highly toughened poly(lactic acid) (PLA) prepared through melt blending with ethylene-co-vinyl acetate (EVA) copolymer and simultaneous addition of hydrophilic silica nanoparticles and block copolymer compatibilizer

Salar Moradi et al.

POLYMER TESTING (2020)

添加到收藏夹

Article Polymer Science

Influence of DCP content on the toughness and morphology of fully biobased ternary PLA/NR-PMMA/NR TPVs with co-continuous phase structure

Jiamei Huang et al.

POLYMER-PLASTICS TECHNOLOGY AND MATERIALS (2020)

添加到收藏夹

Article Polymer Science

Synergistic effect of adding lignin and carbon black in poly(lactic acid)

Thais Ferreira da Silva et al.

POLIMEROS-CIENCIA E TECNOLOGIA (2020)

添加到收藏夹

Article Engineering, Environmental

Rheology, Mechanical Properties and Morphology of Poly(lactic acid)/Ethylene Vinyl Acetate Blends

Pankaj Agrawal et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2019)

添加到收藏夹

Article Polymer Science

Rubber Toughening of Polylactic Acid (PLA) with Poly(butylene adipate-co-terephthalate) (PBAT): Mechanical Properties, Fracture Mechanics and Analysis of Ductile-to-Brittle Behavior while Varying Temperature and Test Speed

Vito Gigante et al.

EUROPEAN POLYMER JOURNAL (2019)

添加到收藏夹

Article Polymer Science

Toward Fully Bio-based and Supertough PLA Blends via in Situ Formation of Cross-Linked Biopolyamide Continuity Network

Hongzhi Liu et al.

MACROMOLECULES (2019)

添加到收藏夹

Article Polymer Science

Development of PLA/EVA Reactive Blends for Heat-Shrinkable Film

Rattikarn Khankrua et al.

POLYMERS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Super Toughened Poly(lactic acid)-Based Ternary Blends via Enhancing Interfacial Compatibility

Feng Wu et al.

ACS OMEGA (2019)

添加到收藏夹

Article Engineering, Chemical

Effect of annealing on the properties of polylactide/poly(butylene carbonate) blend

Feng Ge et al.

ADVANCES IN POLYMER TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Environmental

Investigation on the Influence of EVA Content on the Mechanical and Thermal Characteristics of Poly(lactic acid) Blends

V. H. Sangeetha et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2018)

添加到收藏夹

Article Chemistry, Applied

Coir pith/nylon/epoxy hybrid composites and their thermal properties: Thermogravimetric analysis, thermal ageing, and heat deflection temperature

Raguramsingh Narendar et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Chemical

Heat resistance of biobased materials, evaluation and effect of processing techniques and additives

Nanou Peelman et al.

POLYMER ENGINEERING AND SCIENCE (2018)

添加到收藏夹

Review Polymer Science

Preparation, microstructure, and microstructure-properties relationship of thermoplastic vulcanizates (TPVs): A review

Nanying Ning et al.

PROGRESS IN POLYMER SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Poly(Lactic Acid)-Based Nanobiocomposites with Modulated Degradation Rates

Iozzino Valentina et al.

MATERIALS (2018)

添加到收藏夹

Review Pharmacology & Pharmacy

Poly(lactic acid) blends in biomedical applications

P. Saini et al.

ADVANCED DRUG DELIVERY REVIEWS (2016)

添加到收藏夹

Article Engineering, Electrical & Electronic

Effect of TiO2-Crystal Forms on the Photo-Degradation of EVA/PLA Blend Under Accelerated Weather Testing

Do Van Cong et al.

JOURNAL OF ELECTRONIC MATERIALS (2016)

添加到收藏夹

Article Materials Science, Composites

Influences of three different ethylene copolymers on the toughness and other properties of polylactide

Y. Meyva et al.

PLASTICS RUBBER AND COMPOSITES (2016)

添加到收藏夹

Article Materials Science, Characterization & Testing

Morphology and properties of super-toughened bio-based poly(lactic acid)/poly(ethylene-co-vinyl acetate) blends by peroxide-induced dynamic vulcanization and interfacial compatibilization

Ning Zhang et al.

POLYMER TESTING (2016)

添加到收藏夹

Article Materials Science, Characterization & Testing

Process simulation of laboratory internal mixers

Tatianny S. Alves et al.

POLYMER TESTING (2016)

添加到收藏夹

Article Polymer Science

Melt processed PLA/PCL blends: Effect of processing method on phase structure, morphology, and mechanical properties

Jon Urquijo et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Biobased Poly(lactide)/ethylene-co-vinyl Acetate Thermoplastic Vulcanizates: Morphology Evolution, Superior Properties, and Partial Degradability

Piming Ma et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2015)

添加到收藏夹

Article Materials Science, Composites

Preparation and Properties of Wood Plastic Composites Based on Tea Residue

Shuai He et al.

POLYMER COMPOSITES (2015)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Effect of peroxide and chain extender on mechanical properties and morphology of poly (butylene succinate)/poly (lactic acid) blends

W. Cherykhunthod et al.

2015 GLOBAL CONFERENCE ON POLYMER AND COMPOSITE MATERIALS (PCM2015) (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Bio-based poly(lactide)/ethylene-co-vinyl acetate thermoplastic vulcanizates by dynamic crosslinking: structure vs. property

Piming Ma et al.

RSC ADVANCES (2015)

添加到收藏夹

Article Biochemistry & Molecular Biology

Fully Biobased and Supertough Polylactide-Based Thermoplastic Vulcanizates Fabricated by Peroxide-Induced Dynamic Vulcanization and Interfacial Compatibilization

Guang-Chen Liu et al.

BIOMACROMOLECULES (2014)

添加到收藏夹

Article Chemistry, Applied

Crosslinked bicontinuous biobased PLA/NR blends via dynamic vulcanization using different curing systems

Daosheng Yuan et al.

CARBOHYDRATE POLYMERS (2014)

添加到收藏夹

Article Polymer Science

Morphology, Rheology, Crystallization Behavior, and Mechanical Properties of Poly(lactic acid)/Poly(butylene succinate)/Dicumyl Peroxide Reactive Blends

Deyun Ji et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2014)

添加到收藏夹

Article Polymer Science

Plasticization of poly(lactic acid) (PLA) through chemical grafting of poly(ethylene glycol) (PEG) via in situ reactive blending

Kyung-man Choi et al.

EUROPEAN POLYMER JOURNAL (2013)

添加到收藏夹

Article Polymer Science

The preparation and crystallization of long chain branching polylactide made by melt radicals reaction

Jinxiu You et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

添加到收藏夹

Article Engineering, Environmental

Study on the Effect of Dicumyl Peroxide on Structure and Properties of Poly(Lactic Acid)/Natural Rubber Blend

Yun Huang et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2013)

添加到收藏夹

Article Polymer Science

Effect of partial crosslinking on morphology and properties of the poly(β-hydroxybutyrate)/poly(D,L-lactic acid) blends

Weifu Dong et al.

POLYMER DEGRADATION AND STABILITY (2013)

添加到收藏夹

Article Polymer Science

Toughening of poly(lactic acid) by ethylene-co-vinyl acetate copolymer with different vinyl acetate contents

P. Ma et al.

EUROPEAN POLYMER JOURNAL (2012)

添加到收藏夹

Article Materials Science, Characterization & Testing

Changes in activation energy and kinetic mechanism during EVA crosslinking

O. Bianchi et al.

POLYMER TESTING (2011)

添加到收藏夹

Article Polymer Science

The Effect of a Crosslinking Agent on the Morphology and Physical and Mechanical Properties of Polymer Foams Based on EVA and EPDM

Joyce B. Azevedo et al.

POLIMEROS-CIENCIA E TECNOLOGIA (2010)

添加到收藏夹

Article Polymer Science

UV aging behaviour of ethylene-vinyl acetate copolymers (EVA) with different vinyl acetate contents

Jing Jin et al.

POLYMER DEGRADATION AND STABILITY (2010)

添加到收藏夹

Article Polymer Science

The effect of free radical reactions on structure and properties of poly(lactic acid) (PLA) based blends

Maria-Beatrice Coltelli et al.

POLYMER DEGRADATION AND STABILITY (2010)

添加到收藏夹

Article Polymer Science

Effects of crystallinity and crosslinking on the thermal and rheological properties of ethylene vinyl acetate copolymer

YT Sung et al.

POLYMER (2005)

添加到收藏夹

Article Polymer Science

Thermal degradation and rheological behaviour of EVA/montmorillonite nanocomposites

A Riva et al.

POLYMER DEGRADATION AND STABILITY (2002)

添加到收藏夹

Article Thermodynamics

Thermogravimetric analysis and thermal ageing of crosslinked nitrile rubber/poly(ethylene-co-vinyl acetate) blends

H Varghese et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2001)

添加到收藏夹

Article Polymer Science

Aspects of the thermal oxidation of ethylene vinyl acetate copolymer

NS Allen et al.

POLYMER DEGRADATION AND STABILITY (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.