☆ 4.6 Article

Effects of glass fiber reinforcing and thermal post-treatment on the mechanical properties and crystallization behaviors of polyoxymethylene

JOURNAL OF APPLIED POLYMER SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Effects of palygorskite on steroid-transformation in Mycobacterium neoaurum

Liqiu Su et al.

Summary: By incubating palygorskite (Pal) and modified Pal with Mycobacterium neoaurum TCCC 11979 (MNR), the effects of Pal on phytosterols (PS) biotransformation were investigated. The results showed that Pal or modified Pal as a carrier remarkably improved the production of the steroid medicine intermediate androst-4-ene-3, 17-dione (AD). This study expands the application of Pal in the pharmaceutical industry and enhances our understanding of the mechanism underlying the effect of Pal on the bioconversion of hydrophobic compounds.

APPLIED CLAY SCIENCE (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Rapid microwave fabrication of new nanocomposites based on Tb-Co-O nanostructures and their application as photocatalysts under UV/Visible light for removal of organic pollutants in water

Pourya Mehdizadeh et al.

Summary: A novel and stable Tb-Co-O nanocomposite photocatalyst was synthesized through a one-pot microwave route and exhibited excellent photocatalytic efficiency in wastewater treatment. The nanostructures possessed narrow size distribution, good optical properties, and unique crystal structures. Among various experimental conditions, TbCoO3/TbO1.81 nanocomposites with a molar ratio of 1:3 (Tb:Co) showed the best performance in dye degradation.

ARABIAN JOURNAL OF CHEMISTRY (2023)

添加到收藏夹

Article Engineering, Manufacturing

A comparative study of biocarbon reinforced polyoxymethylene and polyamide: Materials performance and durability

Jacek Andrzejewski et al.

Summary: The study evaluated the reinforcing efficiency of a biocarbon filler in POM- and PA6-based biocomposites. Significant differences were found between PA6- and POM-based composites in terms of mechanical properties and fracture mechanisms. Water uptake tests confirmed the strong hygrophytic character of PA6-based composites.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

添加到收藏夹

Article Construction & Building Technology

The effect of the modification of graphene oxide with γ-aminopropyltriethoxysilane (KH550) on the properties and hydration of cement

Xiaotao Zhang et al.

Summary: This study discusses the effect of incorporating graphene oxide (GO) and KH550 modified graphene oxide (MGO) on the microstructure, mechanical properties, and hydration process of cement-based composites. The results show that the surface of MGO is grafted with functional groups, which improves its dispersibility in cement paste. Furthermore, the addition of MGO promotes cement hydration even more than GO, resulting in a more uniform microstructure. The inclusion of MGO also refines the crystal size of hydrated calcium hydroxide (CH), reduces total porosity, and transforms harmful pores to harmless ones, thus enhancing the compactness and mechanical properties of cement-based materials.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Green synthesis of DyBa2Fe3O7.988/DyFeO3 nanocomposites using almond extract with dual eco-friendly applications: Photocatalytic and antibacterial activities

Makarim A. Mahdi et al.

Summary: In this study, photocatalytical and antibacterial activities of DyBa2Fe3O7.988/DyFeO3 (Dy-Ba-Fe-O) nanocomposites were investigated as eco-friendly applications. The synthesis method chosen was ultrasound technique to ensure low energy consumption and achieve a pure product with good crystallinity. Natural almond core extract was used as a green reagent. The nanocomposite exhibited a band gap of 2.6 eV, enabling visible-light photocatalysis. Significant degradation of Rhodamin-B dye and strong antibacterial activity against Gram-negative pathogens were observed. The properties of the nanocomposite were characterized by various analyses.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Materials Science, Characterization & Testing

A comparative study of the crystallinity of polyetheretherketone by using density, DSC, XRD, and Raman spectroscopy techniques

M. Doumeng et al.

Summary: A study on the crystallinity of Polyetheretherketone was conducted using different techniques including density measurement, Differential Scanning Calorimetry, X-ray Diffraction, and Raman spectroscopy. The density measurement gave the most accurate result for the degree of crystallinity, while DSC tended to overestimate and XRD tended to underestimate the crystallinity. Raman spectroscopy was found to be suitable for determining local crystallinity on the surface of the sample.

POLYMER TESTING (2021)

添加到收藏夹

Article Materials Science, Ceramics

Dy2BaCuO5/Ba4DyCu3O9.09 S-scheme heterojunction nanocomposite with enhanced photocatalytic and antibacterial activities

Seyede Raheleh Yousefi et al.

Summary: Semiconductor heterogeneous photocatalysis involving Dy2BaCuO5/Ba4DyCu3O9.09 nanocomposites shows great potential in enhancing photocatalytic performance and antimicrobial activity against various bacterial strains.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Chemistry, Physical

Synthesis, characterization and application of Co/Co3O4 nanocomposites as an effective photocatalyst for discoloration of organic dye contaminants in wastewater and antibacterial properties

Seyede Raheleh Yousefi et al.

Summary: The synthesis of Co/Co3O4 nanocomposites and their photocatalytic and antimicrobial activities were investigated in this study, confirming the synthesis through systematic characterization methods. The antibacterial activity and photocatalytic activity of the nano-catalysts were evaluated against clinical pathogens and organic colors, showing strong efficacy against gram-negative microorganisms.

JOURNAL OF MOLECULAR LIQUIDS (2021)

添加到收藏夹

Article Polymer Science

Durability of fiber-reinforced polyoxymethylene composites under the high hydrostatic pressure in the deep sea

Hao Liu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

添加到收藏夹

Article Materials Science, Composites

Mechanical and thermal properties of polyoxymethylene-matrix composites filled with multi-walled carbon nanotubes-coated milled glass fiber

Xu Xiangmin et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

添加到收藏夹

Article Materials Science, Characterization & Testing

Interfacial adhesion and shear behaviors of aramid fiber/polyamide 6 composites under different thermal treatments

Hongfu Li et al.

POLYMER TESTING (2020)

添加到收藏夹

Article Mechanics

Decrease in non-linear viscosity of a polylactide nanocomposite with regard to the clay volume fraction

Geoffrey Ginoux et al.

RHEOLOGICA ACTA (2020)

添加到收藏夹

Article Materials Science, Ceramics

Self-assembling silicon carbide@Kh550 onto carbon fiber for tribological applications

Le Zhou et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Polymer Science

Polyamide 6 composite with highly improved mechanical properties by PEI-CNT grafted glass fibers through interface wetting, infiltration and crystallization

Jianpeng Fang et al.

POLYMER (2019)

添加到收藏夹

Article Engineering, Industrial

Influence of the manufacturing technology on impact and flexural properties of GF/PP commingled twill fabric laminates

Antonio Formisano et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

添加到收藏夹

Article Polymer Science

Effect of different silane coupling agents on cryogenic properties of silica-reinforced epoxy composites

Hongyu Wang et al.

HIGH PERFORMANCE POLYMERS (2018)

添加到收藏夹

Article Chemistry, Physical

The effect of surface modification of glass fiber on the performance of poly(lactic acid) composites: Graphene oxide vs. silane coupling agents

Mengfan Jing et al.

APPLIED SURFACE SCIENCE (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Effects of bamboo cellulose nanowhisker content on the morphology, crystallization, mechanical, and thermal properties of PLA matrix biocomposites

Shaoping Qian et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Crystallization behaviors and properties of poly (arylene ether nitrile) nanocomposites induced by aluminum oxide and multi-walled carbon nanotubes

Xulin Yang et al.

JOURNAL OF MATERIALS SCIENCE (2018)

添加到收藏夹

Article Materials Science, Composites

Effects of Glass Fiber on the Properties of Polyoxymethylene/Thermoplastic Polyurethane/Multiwalled Carbon Nanotube Composites

Bo-Yuan Zhang et al.

POLYMER COMPOSITES (2017)

添加到收藏夹

Article Polymer Science

Probing the chain segment mobility at the interface of semi-crystalline polylactide/clay nanocomposites

A. Saiter et al.

EUROPEAN POLYMER JOURNAL (2016)

添加到收藏夹

Article Engineering, Industrial

Microstructures and mechanical properties of polylactic acid prepared by a cold rolling process

Lijun Wang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)

添加到收藏夹

Proceedings Paper Energy & Fuels

The effect of processing parameter on mechanical properties of short glass fiber reinforced polyoxymethylene composite by direct fiber feeding injection molding process

Suchalinee Mathurosemontri et al.

COE ON SUSTAINABLE ENERGY SYSTEM (THAI-JAPAN) (2016)

添加到收藏夹

Article Engineering, Manufacturing

The effect of silane coupling agent on iron sand for use in magnetorheological elastomers Part 1: Surface chemical modification and characterization

K. L. Pickering et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

添加到收藏夹

Article Polymer Science

Poly(lactic acid)/polyoxymethylene blends: Morphology, crystallization, rheology, and thermal mechanical properties

Xiaojie Guo et al.

POLYMER (2015)

添加到收藏夹

Article Polymer Science

Effect of shape morphology on mechanical, rheological and tribological properties of polyoxymethylene/aramid composites

Wei Luo et al.

POLYMER SCIENCE SERIES A (2015)

添加到收藏夹

Article Polymer Science

The mechanical and tribologicai properties of nitric acid-treated carbon fiber-reinforced polyoxymethylene composites

Yuanyuan Zhang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2015)

添加到收藏夹

Article Polymer Science

Mechanical and Thermal Properties of Polyoxymethylene Nanocomposites Filled with Different Nanofillers

Sirirat Wacharawichanant et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2014)

添加到收藏夹

Article Chemistry, Physical

Surface modification of filter medium particles with silane coupling agent KH550

Wei Bigui et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2013)

添加到收藏夹

Article Materials Science, Composites

Polyoxymethylene composites with natural and cellulose fibres: Toughness and heat deflection temperature

Andrzej K. Bledzki et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2012)

添加到收藏夹

Article Engineering, Multidisciplinary

Structure and mechanical properties of polyoxymethylene/multi-walled carbon nanotube composites

Xiaowen Zhao et al.

COMPOSITES PART B-ENGINEERING (2011)

添加到收藏夹

Article Polymer Science

Tensile Behavior of glass-fiber-filled polyacetal: Influence of the functional groups of polymer matrices

Kuniaki Kawaguchi et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2008)

添加到收藏夹

Article Engineering, Industrial

The influence of extrusion variables on the interfacial adhesion and mechanical properties of recycled PET composites

ALFD Giraldi et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)

添加到收藏夹

Article Polymer Science

Nucleation activity of glass fibers towards iPP evaluated by DSC and polarizing light microscopy

G Bogoeva-Gaceva et al.

POLYMER (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.