Microstructure and creep properties of cast hypereutectic Al-11Ce alloy with Si addition

This study systematically investigated the as-cast microstructure, heat and creep- resistance of Al-11Ce-xSi (x = 0, 0.9, 1.7 wt%) alloys. A tetragonal AlCeSi intermetallic compound was formed by adding Si. With the increase of Si content, the Chinese-script Al11Ce3/& alpha;-Al eutectics changed to rod-like structure and were gradually replaced by broad flaky AlCeSi/& alpha;-Al eutectics. The Al-11Ce alloy containing 0.9 wt% Si possessed the optimal tensile properties with an ultimate tensile strength of 129.2 MPa and an elongation of 4.3%, which were 8.4% and 65.4% higher than that of the based alloy, respectively. After aging at 400 & DEG;C for 1008 h, the microhardness of Si-containing alloys remained unchanged, indicating excellent coarsening resistance of the strengthening AlCeSi phases. Under tensile creep conditions at 300 & DEG;C, the creep deformation of three alloys was the dislocation creep mechanism. Nevertheless, with the addition of 1.7 wt% Si, the steady-state strain rate of Al-11Ce alloy was decreased to 1/3 of its original value. The enhanced creep resistance was mainly attributed to the relatively high volume fraction of intermetallic phase, the reduced volume fraction of coarse primary phase, and the presence of AlCeSi precipitates that effectively hinder dislocations motion.& COPY; 2023 Elsevier B.V. All rights reserved.

Automated summary

This study systematically investigated the microstructure, heat resistance, and creep resistance of Al-11Ce-xSi (x = 0, 0.9, 1.7 wt%) alloys. The addition of Si resulted in the formation of a tetragonal AlCeSi intermetallic compound. The Al11Ce3/α-Al eutectics transformed into rod-like structure and were gradually replaced by broad flaky AlCeSi/α-Al eutectics as the Si content increased. The Al-11Ce alloy containing 0.9 wt% Si exhibited the optimal tensile properties and excellent coarsening resistance.