☆ 4.7 Article

Thermomechanical treatments for a dual phase cast high entropy alloy

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Rapid solidification of AlCoCrFeNi2.1 High-entropy Alloy

A. Nassar et al.

Summary: The effect of cooling rate on the dual-phase AlCoCrFeNi2.1 Eutectic High-Entropy Alloy was investigated. The microstructure of AlCoCrFeNi2.1 gradually evolved with increasing cooling rate, and different crystal morphologies were observed.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Review Chemistry, Physical

A review of hot deformation behavior and constitutive models to predict flow stress of high-entropy alloys

Zeinab Savaedi et al.

Summary: This review article provides an overview of the hot deformation behavior and constitutive description of flow stress in high entropy alloys (HEAs). The potential of hot working for grain refinement, reduction of casting defects, and enhancement of mechanical properties of HEAs is explained. The effects of processing parameters, alloying elements, dynamic precipitation, and the presence of phases on the hot deformation behavior and restoration processes are discussed. The application of processing maps for characterizing flow instability, cracking, flow softening, and dynamic recrystallization during hot forming of HEAs is presented. Various constitutive models and methods for flow stress modeling and flow curve prediction are assessed. Suggestions for future research works are proposed.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Large-size high-strength and high-ductility AlCoCrFeNi2.1 eutectic high-entropy alloy produced by hot-rolling and subsequent aging

Zhe Liu et al.

Summary: The feasibility of thermomechanical processing for large-size AlCoCrFeNi2.1 eutectic high-entropy alloy has been evaluated. It is found that hot-rolling can achieve outstanding tensile properties comparable to cold-rolling, while cold-rolling and warm-rolling are not effective in deforming large-size AlCoCrFeNi2.1.

MATERIALS LETTERS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the short-time thermal phase-stability of as-cast AlCoCrFeNi2.1 eutectic high entropy alloy

J. Charkhchian et al.

Summary: This study investigates the short-time thermal phase-stability of the as-cast eutectic AlCoCrFeNi2.1 high entropy alloy. Microstructural characterization, thermodynamic calculations, and assessment of mechanical properties were conducted to explore the effect of different temperatures and soaking times on the stability of primary dendritic regions and the formation of ordered phases. The results show that the primary dendritic regions grow and destabilize with an increase in annealing temperature and soaking time, leading to the formation of needle shape B-2 ordered phases. Despite the unstable nature of the primary constituent phases, the material hardness increases significantly at a moderate soaking time.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Thermal stability, microstructure and texture evolution of thermomechanical processed AlCoCrFeNi2.1 eutectic high entropy alloy

M. H. Asoushe et al.

Summary: The microstructural and textural evolutions of as-cast high entropy alloy were investigated during thermomechanical processing at temperatures ranging from 25 to 500 degrees Celsius. The alloy exhibited significant strength-ductility ratio at room temperature and maintained mechanical stability at elevated temperatures. The volume fractions of constituent phases and the texture of the alloy were found to be consistent across different deformation temperatures.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hot deformation behavior and processing map of a Sn0.5CoCrFeMnNi high entropy alloy with dual phases

H. T. Jeong et al.

Summary: The hot compressive deformation behavior of a cast Sn0.5CoCrFeMnNi high-entropy alloy revealed that the MnNiSn-rich ordered FCC phase exhibited a significantly higher degree of dynamic recrystallization compared to the FCC solid solution phase. Continuous dynamic recrystallization was only pronounced in the FCC solid solution phase at the highest temperature of 1248 K.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Chemistry, Physical

Hot compression behaviors and microstructure evolutions of a cast dual-phase NiCoFeCrAl0.7 high-entropy alloy

Qiang Wang et al.

Summary: The hot compression behaviors and microstructure evolutions of a dual-phase high-entropy alloy were investigated, showing that dynamic recrystallization played a key role in flow softening. A constitutive equation describing the correlations between flow stress and hot compression parameters was constructed, and the activation energy of the alloy was significantly improved. Continuous dynamic recrystallization was found to govern flow softening, with the substructure within the deformed microstructure evolving from disordered dislocations to DRX grains.

INTERMETALLICS (2021)

添加到收藏夹

Article Chemistry, Physical

Unique hot deformation behavior and microstructure evolution of a dual FCC-phase CoCrCu1.2FeNi high entropy alloy

Jufu Jiang et al.

Summary: The hot deformation behavior and microstructure evolution of the CoCrCu1.2FeNi high entropy alloy composed of two FCC phases were investigated through hot compression tests and EBSD analysis. Two optimized hot working regions were found and asynchronous dynamic recrystallization was observed. The DRX mechanism shifted from DDRX to CDRX with increasing temperature, leading to the formation of hot working defects.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Chemistry, Physical

Dynamic recrystallization and hot deformation mechanisms of a eutectic Al0.7CoCrFeMnNi high-entropy alloy

H. T. Jeong et al.

Summary: The deformation mechanisms and microstructural evolution of an Al0.7CoCrFeMnNi high-entropy alloy composed of dual phases have been studied, with results indicating that the most effective grain refinement can be achieved from a eutectic microstructure under specific deformation conditions.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Chemistry, Physical

Dynamic recrystallization in AlxCoCrFeNi duplex high entropy alloys

N. Haghdadi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Chemistry, Physical

High temperature deformation behavior of dual-phase Al0.6CoCrFeNi high-entropy alloys

Tangqing Cao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Chemistry, Physical

Influence of lattice distortion on stacking fault energies of CoCrFeNi and Al-CoCrFeNi high entropy alloys

Shi Qiu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Dynamic recrystallization behaviour of AlxCoCrFeNi high entropy alloys during high-temperature plane strain compression

Murugesan Annasamy et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Engineering, Mechanical

The scratch behaviour of AlxCoCrFeNi (x=0.3 and 1.0) high entropy alloys

N. Haghdadi et al.

WEAR (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Enhanced strength-ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae

Peijian Shi et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Chemistry, Physical

Demystifying the sluggish diffusion effect in high entropy alloys

Juliusz Dabrowa et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Engineering, Mechanical

The sliding wear behaviour of CoCrFeMnNi and AlxCoCrFeNi high entropy alloys at elevated temperatures

Jithin Joseph et al.

WEAR (2019)

添加到收藏夹

Review Nanoscience & Nanotechnology

High-entropy alloys

Easo P. George et al.

NATURE REVIEWS MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

The effect of Al to high-temperature deformation mechanisms and processing maps of Al0.5CoCrFeMnNi high entropy alloy

W. J. Kim et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Chemistry, Physical

Experimental and finite element simulation studies on hot deformation behaviour of AlCoCrFeNi2.1 eutectic high entropy alloy

M. R. Rahul et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Review Chemistry, Physical

A review on fundamental of high entropy alloys with promising high-temperature properties

Jian Chen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of low temperature on tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy

Tilak Bhattacharjee et al.

MATERIALS CHEMISTRY AND PHYSICS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Deformation mechanism during high-temperature tensile test in an eutectic high-entropy alloy AlCoCrFeNi2.1

Yaoli Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dislocation creep behavior of CoCrFeMnNi high entropy alloy at intermediate temperatures

You Bin Kang et al.

MATERIALS RESEARCH LETTERS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of coherent L12 nanoprecipitates on the tensile behavior of a fcc-based high-entropy alloy

Z. G. Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

The Microstructure Stability of Precipitation Strengthened Medium to High Entropy Superalloys

Te-Kang Tsao et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

A critical review of high entropy alloys and related concepts

D. B. Miracle et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

Fundamental deformation behavior in high-entropy alloys: An overview

H. Y. Diao et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

Corrosion of high entropy alloys

Yao Qiu et al.

NPJ MATERIALS DEGRADATION (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

A precipitation-hardened high-entropy alloy with outstanding tensile properties

J. Y. He et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Chemistry, Physical

The ultrahigh charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures

DongYue Li et al.

INTERMETALLICS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evolution of microstructure and texture during thermo-mechanical processing of a two phase Al0.5CoCrFeMnNi high entropy alloy

I. S. Wani et al.

MATERIALS CHARACTERIZATION (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Tailoring nanostructures and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy using thermo-mechanical processing

I. S. Wani et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-entropy alloy: challenges and prospects

Y. F. Ye et al.

MATERIALS TODAY (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off

Zhiming Li et al.

NATURE (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Stability of ordered L12 and B2 precipitates in face centered cubic based high entropy alloys - Al0.3CoFeCrNi and Al0.3CuFeCrNi2

B. Gwalani et al.

SCRIPTA MATERIALIA (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanism of magnetic transition in FeCrCoNi-based high entropy alloys

Shuo Huang et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Size effect, critical resolved shear stress, stacking fault energy, and solid solution strengthening in the CrMnFeCoNi high-entropy alloy

Norihiko L. Okamoto et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-Temperature Tensile Strength of Al10Co25Cr8Fe15Ni36Ti6 Compositionally Complex Alloy (High-Entropy Alloy)

H. M. Daoud et al.

JOM (2015)

添加到收藏夹

Article Chemistry, Physical

Temperature dependencies of the elastic moduli and thermal expansion coefficient of an equiatomic, single-phase CoCrFeMnNi high-entropy alloy

G. Laplanche et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Formation of a Huesler-like L21 phase in a CoCrCuFeNiAlTi high-entropy alloy

D. Choudhuri et al.

SCRIPTA MATERIALIA (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Temperature dependent stacking fault energy of FeCrCoNiMn high entropy alloy

Shuo Huang et al.

SCRIPTA MATERIALIA (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Early high-temperature oxidation behavior of Ti(C,N)-based cermets with multi-component AlCoCrFeNi high-entropy alloy binder

Gang Zhu et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)

添加到收藏夹

Article Multidisciplinary Sciences

A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys

Yiping Lu et al.

SCIENTIFIC REPORTS (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

High-Entropy Alloys: A Critical Review

Ming-Hung Tsai et al.

MATERIALS RESEARCH LETTERS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys

K. -Y. Tsai et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy

A. J. Zaddach et al.

JOM (2013)

添加到收藏夹

Article Chemistry, Physical

Microstructure and mechanical property of as-cast, -homogenized, and -deformed AlxCoCrFeNi (0 ≤ x ≤ 2) high-entropy alloys

Yih-Farn Kao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical performance of the AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements

CJ Tong et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.