期刊
JOURNAL OF ALLOYS AND COMPOUNDS
卷 954, 期 -, 页码 -出版社
ELSEVIER SCIENCE SA
DOI: 10.1016/j.jallcom.2023.170224
关键词
Magnesium alloys; Rare earth elements; Hot deformation; Dynamic recrystallization (DRX); Electron backscattered diffraction; Crystallographic texture
The high strength Mg-4Zn-0.5Ca-0.5RE magnesium alloy was subjected to different hot deformation processes to refine its grain structure and enhance its mechanical properties. The extrusion process resulted in a dynamically recrystallized microstructure which improved the mechanical properties compared to the as-cast counterpart, while the forging process led to a partially recrystallized microstructure, indicating the need for high strains. The combination of extrusion and forging was found to be effective in achieving more intense grain refinement and improved strength without sacrificing ductility.
The high strength Mg-4Zn-0.5Ca-0.5RE magnesium alloy was subjected to different hot deformation processes of extrusion, forging, and their combination for grain refinement and improvement of mechanical performance. A fine dynamically recrystallized (DRX) microstructure was obtained by the extrusion process accompanied with the fragmentation and dispersion of the eutectics toward eliminating their deleterious effects, which led to a major improvement in the mechanical properties compared with the as-cast counterpart. However, the forging process led to the development of a partially recrystallized microstructure, indicating the necessity for the application of high strains. On the other hand, detailed electron backscatter diffraction (EBSD) analysis revealed that the combination of extrusion and forging is effective for more intense grain refinement (compared to the extrusion process), leading to the improved yield and ultimate tensile strength while maintaining high ductility (total elongation). A threshold value of grain orientation spread (GOS) was proposed for separating the DRX grains from the deformed ones (below 2 & DEG; for the DRX grains). Moreover, the DRX grain size was correlated with the Zener-Hollomon parameter. These findings can shed light on the industrial application of this wrought Mg alloy. & COPY; 2023 Elsevier B.V. All rights reserved.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据