☆ 4.7 Article

High-performance Cu-Al shape memory alloy in ternary combination with graphene fabricated by powder bed fusion process

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Metallurgy & Metallurgical Engineering

Shape Memory Characteristics of Silver-Added Fe-30Mn-6Si Alloy

N. Babacan

Summary: This study investigates the effects of silver addition on the martensitic transformation temperatures, mechanical properties, and shape recovery performance of solution-treated Fe-30Mn-6Si alloy. The results show that silver addition decreases the martensite volume fraction, improves the mechanical properties and shape recovery performance, and the Ag-rich precipitates strengthen the austenite phase.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D and 4D Printing of Complex Structures of FeMnSi‐Based Shape Memory Alloy Using Laser Powder Bed Fusion (Adv. Mater. Interfaces 13/2022)

Dohyung Kim et al.

Advanced Materials Interfaces (2022)

添加到收藏夹

Article Engineering, Chemical

Biocompatibility Study of a Cu-Al-Ni Rod Obtained by Continuous Casting

Marko Lazic et al.

Summary: This study evaluated the biofunctional performances of Cu-Al-Ni alloy produced by continuous casting, and found that the alloy has a good shape memory effect. In neutral pH environment, the released ion amounts were small, while in acidic environment, a large amount of ions were released, indicating the corrosion resistance of the alloy in acidic environment. However, small doses of copper ions can promote cell proliferation.

PROCESSES (2022)

添加到收藏夹

Article Chemistry, Physical

Powder bed fusion of two-functional Cu-Al-Ni shape memory alloys utilized for 4D printing

Daniyal Abolhasani et al.

Summary: This study investigates the use of a novel two-functional Cu-Al-Ni shape memory alloy (SMA) consisting of two separate structures to enhance the recovery in SMAs. The first structure recovers at a lower temperature, while the second structure recovers at a higher temperature. Additionally, the formation of secondary martensite plates in the second structure enhances the overall recovery.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Chemistry, Physical

Effect of Nd addition on the microstructure, mechanical properties, shape memory effect and corrosion behaviour of Cu-Al-Ni high-temperature shape memory alloys

Xin Zhang et al.

Summary: The addition of rare earth element Nd can refine the grains, improve the mechanical properties, enhance the shape memory effect of Cu-13.0Al-4.0Ni-xNd high-temperature shape memory alloys. However, it slightly reduces the corrosion resistance of the alloys, which is mainly controlled by the Cu element.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

The Grain Boundary Wetting Phenomena in the Ti-Containing High-Entropy Alloys: A Review

Boris B. Straumal et al.

Summary: This review analyzes the wetting phenomenon of grain boundaries (GB) by melt in multicomponent alloys without principal components (high-entropy alloys or HEAs) containing titanium. The study discusses complete and partial wetting, as well as the potential use of wetting in grain-boundary engineering to improve HEAs' properties.

METALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhancing the shape memory effect of Cu-Al-Ni alloys via partial reinforcement by alumina through selective laser melting

Daniyal Abolhasani et al.

Summary: The study introduced a new method to enhance the shape memory effect and stability in Cu-Al-Ni shape memory alloys by partially reinforcing with alumina through selective laser melting. Partial reinforcement accumulates localized residual compressive stresses, increasing the shape memory effect, and a waistband effect is observed during cyclic compressive operation, facilitating higher strain recovery. These results confirm that partial reinforcement with alumina significantly enhances the shape memory effect of Cu-Al-Ni shape memory alloys.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Chemistry, Physical

Structural evolution of a CuZr-based bulk metallic glass composite during cryogenic treatment observed by in-situ high-energy X-ray diffraction

Peng Xue et al.

Summary: In this study, in-situ high-energy X-ray diffraction and molecular dynamic simulation were used to investigate the structural evolution of CuZr-based bulk metallic glass composites during cryogenic treatment. The pre-strained sample underwent martensitic transformation and reverse martensitic transformation, which were influenced by environmental factors and stress. The results provide insights into the mechanism of martensitic transformation in the B2 CuZr phase and offer guidance for fine-tuning the structure and mechanical behaviors of these composites.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Effects of alloying, heat treatment and nanoreinforcement on mechanical properties and damping performances of Cu-Al-based alloys: A review

Liu Yang et al.

Summary: Cu-Al based alloys are a new type of functional material with excellent damping performance due to their unique thermoelastic martensite structure. However, issues such as elastic anisotropy and large grain size can lead to a brittle fracture. Researchers focus on refining the grain size to design Cu-Al alloys with excellent mechanical properties and damping performance.

NANOTECHNOLOGY REVIEWS (2021)

添加到收藏夹

Article Materials Science, Composites

Microstructure and mechanical characterizations of graphene nanoplatelets-reinforced Mg-Sr-Ca alloy as a novel composite in structural and biomedical applications

S. Ramezanzade et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

添加到收藏夹

Article Physics, Multidisciplinary

The Formation of the ω Phase in the Titanium-iron System under Shear Deformation

B. B. Straumal et al.

JETP LETTERS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-temperature shape memory alloys based on the Cu-Al-Ni system: design and thermomechanical characterization

I. Lopez-Ferreno et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Review Nanoscience & Nanotechnology

Graphene-Reinforced Bulk Metal Matrix Composites: Synthesis, Microstructure, and Properties

Sara Ahmad et al.

REVIEWS ON ADVANCED MATERIALS SCIENCE (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Carbonitriding of Ti-6Al-4V alloy via laser irradiation of pure graphite powder in nitrogen environment

Dong Myeong Seo et al.

SURFACE & COATINGS TECHNOLOGY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Selective laser melting of AISI 304 stainless steel composites reinforced by Al2O3 and eutectic mixture of Al2O3-ZrO2 powders

Daniyal Abolhasani et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Analysis of Melt-Pool Behaviors during Selective Laser Melting of AISI 304 Stainless-Steel Composites

Daniyal Abolhasani et al.

METALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental and molecular dynamics simulation study on the glass formation of Cu-Zr-Al alloys

Luis Cesar R. Aliaga et al.

MATERIALS RESEARCH EXPRESS (2019)

添加到收藏夹

Article Chemistry, Physical

Fabrication, characterization and potential application of larger bulk Ti-Ni-Hf high temperature shape memory alloy composite reinforced by hybrid particles

Xiaoyang Yi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Selective laser remelting of an additively manufactured Cu-Al-Ni-Mn shape-memory alloy

Tobias Gustmann et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Graphene reinforced metal and ceramic matrix composites: a review

Andy Nieto et al.

INTERNATIONAL MATERIALS REVIEWS (2017)

添加到收藏夹

Article Physics, Applied

Shocking of metallic glass to induce microstructure heterogeneity: A molecular dynamics study

Chi Ma et al.

JOURNAL OF APPLIED PHYSICS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and mechanical behaviour of aluminium matrix composites reinforced with graphene oxide and carbon nanotubes

Paloma Hidalgo-Manrique et al.

JOURNAL OF MATERIALS SCIENCE (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

In-situ synthesis of graphene decorated with nickel nanoparticles for fabricating reinforced 6061Al matrix composites

Guang Liu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Chemistry, Physical

Laser-assisted synthesis in Cu-Al-Ni system and some of its properties

I. Shishkovsky et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

添加到收藏夹

Article Chemistry, Physical

Compressive behavior of NiTi-based composites reinforced with alumina nanoparticles

Mohammad Farvizi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

In situ and post-mortem TEM study of the super-elastic effect in Cu-Al-Ni shape memory alloys

A. Ibarra et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

添加到收藏夹

Article Physics, Applied

Determination of the next-nearest neighbor order in β phase in Cu-Al-Ni shape memory alloys

JI Pérez-Landazábal et al.

APPLIED PHYSICS LETTERS (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.