4.7 Article

Room-temperature sensing of NH3 gas using CsPbBr3 thin films grown via dual-source evaporation

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Fabrication of Rb2TeI6 thin films for stable, lead-free perovskite photodetector via dry-processed approach

Phung Dinh Hoat et al.

Summary: This paper reports a dry-processed approach for fabricating Rb2TeI6 thin film, a rarely studied material in the vacancy-ordered double perovskite group. The film exhibits a tetragonal structure with good morphology, high absorption coefficient, and good stability in ambient air. A photodetector based on the Rb2TeI6 thin film shows excellent photoresponsivity, photodetectivity, and response times, along with operational stability, indicating its potential for photodetector applications.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Review Chemistry, Physical

Pure Tin Halide Perovskite Solar Cells: Focusing on Preparation and Strategies

Hairui Liu et al.

Summary: Metal halide perovskite solar cells (PSCs) have become an important field of research in photovoltaics. However, the toxicity of lead (Pb) hinders its commercial adoption, leading researchers to investigate lead-free perovskites. Tin-based perovskites have emerged as potential alternatives, but their instability and low efficiency due to rapid oxidation remain challenges. This study introduces strategies to improve the stability and efficiency of pure tin-based PSCs, including optimization of crystal structure, processing and interfaces, as well as the implementation of low-dimensional structures. Finally, new perspectives for further developing tin-based PSCs are provided.

ADVANCED ENERGY MATERIALS (2023)

Article Nanoscience & Nanotechnology

Lead-free defective halide perovskites Cs2SnX6 (X = Cl, Br, I) for highly robust formaldehyde sensing at room temperature

Yan-Yan Yin et al.

Summary: In this study, all-inorganic lead-free halide perovskites Cs2SnX6 (X = Cl, Br, I) were synthesized using a simple room-temperature precipitation method. Material characterization revealed the presence of halogen vacancies, which contribute to their sensing capabilities. As room-temperature formaldehyde (HCHO) sensing materials, Cs2SnX6 showed varying sensitivities, with Cs2SnI6 exhibiting excellent selectivity, high response, short response/recovery time, good repeatability, and long-term stability. The sensing mechanism for HCHO was investigated, and it was found that the rich iodine vacancies on the Cs2SnI6 surface facilitated the oxidation of HCHO molecules. This work provides a promising candidate for practical HCHO detection at room temperature and offers insights for designing halide perovskites for future sensory devices.

SCRIPTA MATERIALIA (2023)

Article Chemistry, Physical

Fabrication and investigation of a new all-inorganic lead free perovskite Cs3Bi2I6 Br3 for ammonia detection at room temperature

Wanli Jiao et al.

Summary: A new all-inorganic Cs3Bi2I6Br3 perovskite synthesized by a liquid spin-coating method shows high responses to ammonia at room temperature, with good recovery process and stability. This new material offers a potential green gas sensor design strategy for room temperature detection.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Engineering, Environmental

UV illumination-enhanced ultrasensitive ammonia gas sensor based on (001)TiO2/MXene heterostructure for food spoilage detection

Dongzhi Zhang et al.

Summary: The study introduces a method to design sensing materials by growing TiO2 on two-dimensional transition metal carbide to enhance the performance of ammonia sensors. With this design, the sensor shows 34 times higher sensitivity to ammonia, and the composite structure exhibits the highest affinity for adsorbing ammonia.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Engineering, Electrical & Electronic

Performance of NiO intercalated rGO nanocomposites for NH3 sensing at room temperature

Sasithorn Srirattanapibul et al.

Summary: NiO intercalated reduced graphene oxide nanocomposites with various amounts of NiO nanoparticles were prepared and showed excellent NH3 gas sensing performance. Increasing the amount of NiO nanoparticles enhanced gas response ability and response/recovery time. The nanocomposites demonstrated promising potential for room temperature NH3 detection by combining NiO nanoparticles with reduced graphene oxide.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2022)

Article Nanoscience & Nanotechnology

Synthesis of Cs2TeI6 thin film and its NO2 gas-sensing properties under blue-light illumination

Phung Dinh Hoat et al.

Summary: A thin film of Cs2TeI6 perovskite was prepared on a glass substrate via a non-solution process, and its gas-sensing properties, especially the high selectivity and low detection limit for NO2 gas, were studied. The results show the potential application of this sensor for NO2 gas sensing at room temperature.

SCRIPTA MATERIALIA (2022)

Article Chemistry, Analytical

P-Type Metal Oxide Semiconductor Thin Films: Synthesis and Chemical Sensor Applications

Abderrahim Moumen et al.

Summary: This review discusses the synthesis of p-type metal-oxide (p-type MOX) semiconductor thin films for chemical-sensing applications, focusing on CuO, NiO, Co3O4, and Cr2O3. Various techniques for growing p-MOX thin films are reviewed, including physical vapor deposition (PVD) and chemical vapor deposition (CVD). The physicochemical properties, sensing mechanism, and sensing characteristics of the mentioned thin films are discussed. Strategies for improving the sensing capabilities of p-type MOX thin films are also presented.

SENSORS (2022)

Article Chemistry, Multidisciplinary

Fast-Response Oxygen Optical Fiber Sensor based on PEA2SnI4 Perovskite with Extremely Low Limit of Detection

Shunshuo Cai et al.

Summary: In this study, a novel oxygen optical fiber sensor based on halide perovskites and tilted fiber Bragg grating (TFBG) was demonstrated. The sensor showed fast response time and low limit of detection, making it suitable for accurate oxygen detection at low concentrations.

ADVANCED SCIENCE (2022)

Article Materials Science, Ceramics

Fabrication of Ti3C2Tx/In2O3 nanocomposites for enhanced ammonia sensing at room temperature

Ming Zhou et al.

Summary: Ti3C2Tx/In2O3 nanocomposites exhibit excellent NH3 sensing performance at room temperature, with high response, stable repeatability, and selectivity, showing great potential for NH3 detection at room temperature.

CERAMICS INTERNATIONAL (2022)

Article Physics, Multidisciplinary

Enhancement in room temperature ammonia sensing performance of the La substituted SnO2 (La:SnO2) thin films developed using spray pyrolysis technique

M. Boomashri et al.

Summary: Pristine SnO2 and La-doped SnO2 thin films were synthesized using spray pyrolysis, with different La concentrations tested for their gas sensing performance towards ammonia. The XRD analysis confirmed tetragonal structures, while SEM and EDX results showed the presence of Sn, O, and La elements in the films. Optical studies indicated increased transparency and shifted bandgaps with La doping, with 1% La:SnO2 exhibiting the highest response and stability for ammonia gas sensing at room temperature.

PHYSICA SCRIPTA (2022)

Article Chemistry, Analytical

Chemoresistive NH3 gas sensor at room temperature based on the carbon gel-TiO2 nanocomposites

M. D. Fernandez-Ramos et al.

Summary: A resistive sensor based on carbon gel-TiO2 nanocomposites has been developed to detect ammonia gas, showing good sensitivity, selectivity, stability, and resistance to humidity.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Article Chemistry, Analytical

P-type Sb doping hierarchical WO3 microspheres for superior close to room temperature ammonia sensor

Guanyu Yao et al.

Summary: Antimony-doped tungsten oxide nanosheet-assembled microspheres were synthesized via hydrothermal method, showing excellent sensitivity, fast response, and low detection limit for ammonia at near room temperature.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Article Engineering, Electrical & Electronic

Dispersed and spherically assembled porous NiO nanosheets for low concentration ammonia gas sensing applications

Feng-Renn Juang et al.

Summary: This study comprehensively investigates and demonstrates the sensing characteristics of resistor-type ammonia gas sensors with different architectures of porous NiO nanosheets. The morphology of the NiO nanostructure can be varied by adjusting the amount of nickel nitrate hexahydrate during synthesis. The presence of holes on the NiO nanosheets increases the material's surface area and enhances the sensor's sensing performances. Among the different sensors, the dispersed distribution exhibits a higher sensing response ratio and faster response time to low concentration ammonia gas, making it suitable for accurate ammonia sensing applications.

SOLID-STATE ELECTRONICS (2022)

Article Materials Science, Multidisciplinary

Boron induced c-axis growth and ammonia sensing signatures of spray pyrolysis deposited ZnO thin films - Relation between crystallinity and sensing

Prabakaran Shankar et al.

Summary: Optimized spray pyrolysis deposition parameters are reported for the development of c-axis oriented boron-doped zinc oxide thin films. 2% boron dopants promote the growth of specific crystal planes and increase the crystallite size. 10% boron dopants result in stress and band gap changes in the zinc oxide films, as well as enhanced ammonia sensing performance.

THIN SOLID FILMS (2022)

Article Materials Science, Multidisciplinary

High sensitivity H2S gas sensors using lead halide perovskite nanoparticles

Ahmad Ayesh et al.

Summary: In this study, a high sensitivity H2S gas sensor based on perovskite nanoparticles was developed. The sensor was synthesized using a relatively simple solution-growth method and exhibited a high sensitivity to H2S gas, with a fast response time.

RESULTS IN PHYSICS (2022)

Review Engineering, Electrical & Electronic

Perovskite light-emitting diodes

Azhar Fakharuddin et al.

Summary: Light-emitting diodes based on halide perovskites have achieved significant progress in recent years, with external quantum efficiencies surpassing 23%. However, their practical application is still limited due to factors such as low efficiency in blue-emitting devices, inability to access emission wavelengths above 800 nm, decreased external quantum efficiency at high current density, lack of understanding of the electric field's effect on mobile ions in perovskite materials, and short device lifetimes. This review explores the development of perovskite light-emitting diodes, examining the key challenges in creating efficient and stable devices.

NATURE ELECTRONICS (2022)

Article Materials Science, Multidisciplinary

The ammonia detection of cesium lead halide perovskite quantum dots in different halogen ratios at room temperature

Yuanhao Huang et al.

Summary: This paper discusses the rapid development of all-inorganic perovskite structured nanomaterials CsPbX3 quantum dots (QDs) in various applications, such as photovoltaics, light-emitting diodes, and photoelectric detectors. It also highlights the potential of these materials in sensing applications, particularly in gas sensing. The paper proposes a series of fluorescence turn-on ammonia gas sensors based on CsPbX3 films, and explores the mechanism behind the sensing process. The sensors exhibit impressive performance in sensitivity, response time, and reversibility, making them a promising option for low cost, high precision gas detection based on optical signals.

OPTICAL MATERIALS (2022)

Article Chemistry, Multidisciplinary

Unraveling the Gas-Sensing Mechanisms of Lead-Free Perovskites Supported on Graphene

Juan Casanova-Chafer et al.

Summary: This study reports gas sensors based on lead-free perovskite nanocrystals supported on graphene, which exhibit excellent sensitivity and performance for detecting various harmful pollutants.

ACS SENSORS (2022)

Article Chemistry, Analytical

Layered MXene heterostructured with In2O3 nanoparticles for ammonia sensors at room temperature

Zhi Liu et al.

Summary: The MXene/In2O3 heterostructure was formed through a facile hybridization process, allowing In2O3 nanoparticles to be evenly distributed on the MXene surface and partially inserted between its layers. The chemiresistive-type gas sensor based on MXene/In2O3 hybrids exhibited good sensitivity and selectivity towards NH3 at room temperature. In addition, the wireless-type response of the MXene/In2O3 based sensors, coupled with a LC antenna fabricated using LTCC technology, showed excellent performance.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Article Chemistry, Physical

Fabrication and properties of room temperature ammonia gas sensor based on SnO2 modified WSe2 nanosheets heterojunctions

Tian Wang et al.

Summary: In this work, a room-temperature ammonia sensor based on hydrothermally synthesized tin dioxide/tungsten selenide (SnO2/WSe2) nanostructure was demonstrated. The sensor showed high response rate, low detection limit, and excellent stability and repeatability, which was mainly attributed to the special heterojunction structure between SnO2 nanorod and WSe2 hexagonal nanosheets.

APPLIED SURFACE SCIENCE (2022)

Article Engineering, Environmental

Room temperature gas sensors based on Ce doped TiO2 nanocrystals for highly sensitive NH3 detection

Kaidi Wu et al.

Summary: This study developed a series of Ce doped TiO2 nanocrystals for ammonia detection at room temperature, showing high performance in terms of response, detection limit, selectivity, repeatability, and stability. The enhanced sensing mechanism was explained by the synergetic effects of re-orientated high energy facets, oxygen vacancy, and large specific surface area. Furthermore, the practical application potential in fish freshness detection was also evaluated.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

UV-enhanced highly sensitive ammonia sensing properties based on 2DPI/In2O3 heterostructure at room temperature

Yan Yang et al.

Summary: The UV-enhanced sensing performance of a 2DPI/In2O3 based sensor for NH3 at room temperature was investigated. The composite material was synthesized using a hydrothermal method and showed sensitivity to NH3 with or without UV illumination. Characterization techniques confirmed the superior performance of the 2DPI/In2O3 sensor compared to pure 2DPI or In2O3 sensors. The presence of the 2DPI-In2O3 heterojunction and the photocatalytic promotion of 2DPI contribute to the enhanced sensing performance.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Review Materials Science, Multidisciplinary

A review on the sensing mechanisms and recent developments on metal halide-based perovskite gas sensors

Pratik V. Shinde et al.

Summary: This article provides a brief overview of the research progress, current status, and future development of metal halide perovskite-based gas sensors, including the material properties, synthesis methods, sensing mechanisms, and recent advancements.

JOURNAL OF MATERIALS CHEMISTRY C (2022)

Article Chemistry, Physical

Understanding the stability origins of ambient stable CsPbI2Br inorganic halide perovskites

Congtan Zhu et al.

Summary: Research has shown that the presence of oxygen and moisture during the preparation of CsPbI2Br halide perovskite in dry and humid air can affect its phase stability, leading to the development of more robust IHPs.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Materials Science, Multidisciplinary

Mixed-dimensional organic-inorganic metal halide perovskite (OIMHP) based gas sensors with superior stability for NO2 detection

The Duong et al.

Summary: The study demonstrates that dimensional engineering of organic-inorganic metal halide perovskite (OIMHP) materials can significantly improve the performance and ambient stability of gas sensors, showing excellent sensitivity and selectivity for detecting NO2 gas.

MATERIALS ADVANCES (2022)

Article Chemistry, Physical

UV-enhanced highly sensitive ammonia sensing properties based on 2DPI/In2O3 heterostructure at room temperature

Yan Yang et al.

Summary: The 2DPI/In2O3 composite material synthesized by hydrothermal method shows sensitivity to NH3 and exhibits significant enhancement under UV illumination, making it a promising sensor for UV-assisted NH3 detection at room temperature.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Chemistry, Multidisciplinary

Visual colorimetric detection of ammonia under gaseous and aqueous state: Approach on cesium lead bromide perovskite-loaded porous electrospun nanofibers

Bumjun Park et al.

Summary: Porous cesium lead bromide nanofibers were fabricated via electrospinning and utilized in a sensor to detect gaseous and aqueous ammonia effectively. The stability of the nanofibers under different environmental conditions was verified, showing significant promise in assessing food decay for safe purchase of fresh agricultural products.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2021)

Article Chemistry, Physical

Highly efficient and stable inorganic CsPbBr3 perovskite solar cells via vacuum co-evaporation

Yanyan Duan et al.

Summary: High PCE and long-term stability are important for perovskite solar cells. By depositing CsPbBr3 perovskite film through vacuum co-evaporation and optimizing the preparation conditions, films with large grains and high crystallinity can be obtained to achieve high PCE. Controlling spinning speed of TiO2 precursor solution and thickness of CsPbBr3 film can enhance the PCE of solar cells under illumination conditions.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Electrochemical p-Doping of CsPbBr3 Perovskite Nanocrystals

Jence T. Mulder et al.

Summary: Lead halide perovskite nanocrystals can be successfully p-doped via electrochemical hole injection, allowing for control over electronic doping of these materials.

ACS ENERGY LETTERS (2021)

Article Nanoscience & Nanotechnology

Growth and gas sensing properties of methylammonium tin iodide thin film

Vu Xuan Hien et al.

SCRIPTA MATERIALIA (2020)

Article Chemistry, Analytical

Synthesis and high ammonia gas sensitivity of (CH3NH3)PbBr3-xIx perovskite thin film at room temperature

Wanli Jiao et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Article Chemistry, Analytical

Rb2CO3-decorated In2O3 nanoparticles for the room-temperature detection of sub-ppm level NO2

Nguyen Manh Hung et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Article Engineering, Electrical & Electronic

Improving the performances of CsPbBr3solar cells fabricated in ambient condition

Beilei Yuan et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Article

Metal-Oxide Based Ammonia Gas Sensors: A Review

Priya Gupta et al.

Nanoscience and Nanotechnology - Asia (2020)

Article Materials Science, Multidisciplinary

P-type Charge Transport and Selective Gas Sensing of All-Inorganic Perovskite Nanocrystals

Jiyun Kim et al.

ACS MATERIALS LETTERS (2020)

Article Materials Science, Multidisciplinary

Low defects density CsPbBr3 single crystals grown by an additive assisted method for gamma-ray detection

Yuanxiang Feng et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Review Materials Science, Multidisciplinary

Perovskite CsPbBr3 crystals: growth and applications

Jiaoxian Yu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Article Chemistry, Multidisciplinary

High-Sensitive Ammonia Sensors Based on Tin Monoxide Nanoshells

Han Wu et al.

NANOMATERIALS (2019)

Article Chemistry, Analytical

Gas Sensing Properties of Perovskite Decorated Graphene at Room Temperature

Juan Casanova-Chafer et al.

SENSORS (2019)

Article Chemistry, Multidisciplinary

Stable CsPbBr3 perovskite quantum dots with high fluorescence quantum yields

Min Zhang et al.

NEW JOURNAL OF CHEMISTRY (2018)

Article Materials Science, Multidisciplinary

A new inorganic-organic hybrid halide perovskite thin film based ammonia sensor

Nidhi Gupta et al.

ORGANIC ELECTRONICS (2018)

Article Chemistry, Physical

Fused-Ring Electron Acceptor ITIC-Th: A Novel Stabilizer for Halide Perovskite Precursor Solution

Minchao Qin et al.

ADVANCED ENERGY MATERIALS (2018)

Article Materials Science, Multidisciplinary

An optical fibre-based sensor for the detection of gaseous ammonia with methylammonium lead halide perovskite

Shuai Ruan et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Article Materials Science, Multidisciplinary

Highly sensitive optical ammonia gas sensor based on Sn Doped V2O5 Nanoparticles

Nitu Singh et al.

MATERIALS RESEARCH BULLETIN (2018)

Review Materials Science, Multidisciplinary

Metal halide perovskites: stability and sensing-ability

Zhaohua Zhu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Article Engineering, Electrical & Electronic

High Performance CuO Nanorectangles-Based Room Temperature Flexible NH3 Sensor

Bhuvaneshwari Sakthivel et al.

IEEE SENSORS JOURNAL (2017)

Article Materials Science, Multidisciplinary

Properties of cesium tin iodide (Cs-Sn-I) systems after annealing under different atmospheres

Lucangelo Dimesso et al.

MATERIALS CHEMISTRY AND PHYSICS (2017)

Article Chemistry, Multidisciplinary

SnO2/SnS2 nanotubes for flexible room-temperature NH3 gas sensors

Rui Li et al.

RSC ADVANCES (2017)

Article Chemistry, Physical

Room temperature ammonia sensing properties of ZnO thin films grown by spray pyrolysis: Effect of Mg doping

Arockia Jayalatha Kulandaisamy et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Article Chemistry, Physical

Direct Observation of Reversible Transformation of CH3NH3PbI3 and NH4PbI3 Induced by Polar Gaseous Molecules

Weixin Huang et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2016)

Article Chemistry, Multidisciplinary

A resistance change effect in perovskite CH3NH3PbI3 films induced by ammonia

Chunxiong Bao et al.

CHEMICAL COMMUNICATIONS (2015)

Article Chemistry, Multidisciplinary

Optical bleaching of perovskite (CH3NH3) PbI3 through room-temperature phase transformation induced by ammonia

Yixin Zhao et al.

CHEMICAL COMMUNICATIONS (2014)

Article Chemistry, Analytical

High sensing response of β-Ga2O3 thin film towards ammonia vapours: Influencing factors at room temperature

R. Pandeeswari et al.

SENSORS AND ACTUATORS B-CHEMICAL (2014)

Article Materials Science, Multidisciplinary

Highly selective and sensitive room temperature NO2 gas sensor based on polypyrrole thin films

S. T. Navale et al.

SYNTHETIC METALS (2014)

Article Chemistry, Multidisciplinary

Role(s) of adsorbed water in the surface chemistry of environmental interfaces

Gayan Rubasinghege et al.

CHEMICAL COMMUNICATIONS (2013)

Article Engineering, Electrical & Electronic

Room Temperature Ammonia Gas Sensor Based on Polyaniline-TiO2 Nanocomposite

S. G. Pawar et al.

IEEE SENSORS JOURNAL (2011)

Article Chemistry, Analytical

Cr2O3-activated ZnO thick film resistors for ammonia gas sensing operable at room temperature

D. R. Patil et al.

SENSORS AND ACTUATORS B-CHEMICAL (2007)

Article Chemistry, Analytical

Electrospun biocomposite nanofibers for urea biosensing

K Sawicka et al.

SENSORS AND ACTUATORS B-CHEMICAL (2005)

Review Chemistry, Analytical

Ammonia sensors and their applications - a review

B Timmer et al.

SENSORS AND ACTUATORS B-CHEMICAL (2005)