相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article
Chemistry, Physical
Lingzhi Huang et al.
Summary: A Z-scheme LaFeO3/MoS2/graphene photocatalyst was synthesized and tested for the degradation of dye wastewater. The photocatalyst showed high efficiency and stable performance, attributed to the synergistic effect between LaFeO3 and MoS2/graphene co-catalyst and the optimized Z-scheme heterojunction interface.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Article
Chemistry, Physical
Jiahao Zu et al.
Summary: Lithium-sulfur (Li-S) batteries are promising energy storage devices with high energy density, specific capacity, low cost, and environmental friendliness. However, the shuttle effect of polysulfides and the growth of lithium dendrites hinder their practical application. In this study, a modified separator with alpha-MnO2 supported on carbon nanotubes was prepared to address these issues. The modified separator effectively inhibits the shuttle effect of polysulfides, enhances electrochemical activity, and promotes ion and electron transfer. The alpha-MnO2 @CNT-based Li-S battery exhibits excellent cycling performance and high discharge capacity.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Article
Chemistry, Physical
Meina Liu et al.
Summary: In this paper, a simple and reliable hydrothermal synthesis strategy was used to prepare high-performance energy storage materials. Spherical MoS2 composite wheat straw cellulose carbon material (MoS2 @WSCC-S) and 3D nanoflower-like MoS2 grown on wheat straw cellulose carbon (MoS2 @WSCC-F) were successfully obtained through the addition of polyvinylpyrrolidone (PVP) and ammonium persulfate (APS) under acidic conditions. The presence of oxygen-containing groups and the pH of the solution play key roles in the formation of flower-like structures.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Article
Chemistry, Physical
Fuling Li et al.
Summary: In this study, core-shell Co9S8 @MoS2 nanocubes anchored on reduced graphene oxide nanosheets were fabricated using a self-assembly method followed by pyrolysis, forming hierarchical heterostructures. The designed heterostructure exhibited excellent microwave absorption performance with low loading content.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Article
Environmental Sciences
Shuqi Li et al.
Summary: A novel direct Z-scheme photocatalyst was prepared by hybridizing 0D MoS2 quantum dots and 3D honeycomb-like conjugated triazine polymers. The 0D/3D hierarchical structure and p-n junction significantly improved the photocatalytic activity and durability.
JOURNAL OF ENVIRONMENTAL SCIENCES
(2023)
Article
Materials Science, Multidisciplinary
Wenxiang Zhu et al.
Summary: A multifunctional hydrogel composed of modified sericin and nanoparticles was developed, which exhibited photothermal activity to kill tumor cells and bacteria, as well as antioxidative properties and good biocompatibility. The hydrogel effectively repaired rabbit articular cartilage defects and promoted the regeneration of mouse skin burning wounds.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
(2023)
Article
Chemistry, Multidisciplinary
Pengfei Shen et al.
Summary: The catalytic activity of 2D materials has been studied and their unique structural and electronic properties contribute to their success in conventional heterogeneous catalysis. Piezocatalysis based on heterojunctions has attracted attention because of band-structure engineering and enhanced charge carrier separation. A reduced graphene oxide (rGO)-MoS2 heterostructure is designed to tackle challenges such as finite active sites, catalyst poisoning, and poor conductivity. The heterostructure exhibits a record-high piezocatalytic degradation rate, which is significantly higher than that of MoS2 nanosheets. The mechanism of this behavior opens up new possibilities for developing efficient catalysts for wastewater treatment and other applications.
ADVANCED MATERIALS
(2023)
Article
Environmental Sciences
Yansong Ma et al.
Summary: In this study, an O-doped MoS2 was synthesized and composited with LaCoO3, leading to improved performance and stability in peroxymonosulfate (PMS) based Fenton-like reactions. The leaching of cobalt in LaCoO3 was greatly reduced, resulting in better catalytic activity and longer lifespan of the reactive oxidation species (ROS).
Article
Chemistry, Physical
Shafaque Rahman et al.
Summary: The study investigates the impact of temperature on the performance of an opto-electrical device derived from semiconductor oxide and chalcogenides nanostructures. The optimized device shows enhanced photodetection performance and electrical measurements at elevated temperature ranges. The temperature dependent opto-electrical phenomenon is explained by the charge transfer and the interface between the electrode and nanostructures.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Article
Chemistry, Physical
Ick-Joon Park et al.
Summary: In this study, the superior properties of two-dimensional van der Waals heterojunctions and their potential for enhanced optoelectronic devices are demonstrated. The band alignment at the MoS2/GO heterojunction is investigated, revealing a type II band alignment. It is found that the band alignment can be controlled by modifying the thickness of MoS2 and the degree of reduction in GO. This research provides valuable insights for the development of next-generation optoelectronic applications.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Article
Chemistry, Physical
Guofei Zhang et al.
Summary: Organic fuels have a significant impact on the morphology, pore structure, and catalytic active sites of metal oxides in solution combustion synthesis (SCS). A comparative study was conducted on the effects of five organic fuels on the thermocatalytic active sites of graded porous MgCo2O4 nanomaterials. Citric acid-fueled CA-MCO exhibited the largest specific surface area, richest pore structure, and the highest number of active sites. The porous CA-MCO demonstrated the best catalytic properties, leading to a decrease in the thermal decomposition temperature of ammonium perchlorate (AP) by 206.06 degrees C, a decrease in activation energy (Ea) by 104.58 kJ·mol-1, and an increase in reaction rate (k) by 2.49 s-1. Furthermore, CA-MCO was successfully applied in AP/HTPB-based composite solid propellants (CSPs), significantly reducing the ignition delay time from 29 ms to 8 ms.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Article
Chemistry, Physical
Jingfan Zhang et al.
Summary: This paper proposes a feasible strategy to optimize the electromagnetic properties of MoS2 absorbent by Fe-doping. Fe-doped 1T/2H-MoS2 nanosheets exhibit excellent electromagnetic wave absorbing properties due to improved permittivity and permeability properties.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Article
Engineering, Manufacturing
Pei Feng et al.
Summary: In this study, molybdenum disulphide nanosheets were synthesized on the surface of graphene oxide nanosheets to improve their dispersion in polylactic acid scaffolds. The resulting nanocomposite exhibited enhanced mechanical properties and showed promising cytocompatibility for bone defect repair.
VIRTUAL AND PHYSICAL PROTOTYPING
(2023)
Article
Chemistry, Physical
Magdeline Tze Leng Lai et al.
Summary: The construction of a p-n heterojunction photocatalyst successfully overcomes the low photo-catalytic activity caused by rapid charge recombination and limited photo-response range. In this study, an interlayer of expanded MoS2 coupled with Bi2WO6 (BW-IEM) photocatalyst was synthesized, achieving a Methylene Blue (MB) removal rate of up to 97% (5.18 x10-2 min-1) under the irradiation of low power 1W LED white light. The outstanding photocatalytic performance of the p-n heterojunctions BW-IEM photocatalyst is attributed to the enhancement of light harvesting, improvement in the separation of charge carriers, and coexistence of oxygen vacancy. The main reactive oxygen species (ROS) responsible for the photo-degradation of MB were center dot Oz radicals and center dot OH. This work provides a new strategy for the potential IEM photocatalyst as a matrix in a p-n heterojunction composite.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Article
Chemistry, Physical
Yu Zeng et al.
Summary: A method for fabricating Ti3C2Tx MXene-MoS2 hybrid fillers/Methyl vinyl silicone rubber (MVQ) composites with high dielectric permittivity was reported. The composites exhibited uniformly distributed Ti3C2Tx MXene-MoS2 hybrid fillers, and the composite with 2.2 wt% hybrid fillers showed a high dielectric permittivity of 7.35 at 103 Hz. The composites also displayed excellent mechanical properties.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Article
Environmental Sciences
Noor Tahir et al.
Summary: The present study investigates and compares the photocatalytic and antibacterial activity of in situ Manganese doped ternary nanocomposites. The Mn-doped Ag2WO4 coupled with MoS2-GO and Mn-doped MoS2 coupled with Ag2WO4-GO both show efficient plasmonic catalysts for wastewater treatment. The nanocomposites exhibit excellent sunlight harvesting ability for dye degradation and show good photocatalytic stability.
JOURNAL OF ENVIRONMENTAL MANAGEMENT
(2023)
Article
Chemistry, Physical
Silki Sardana et al.
Summary: This article presents a simple method to prepare an electrode for supercapacitors and demonstrates its high specific capacitance and cycling stability. The electrode exhibits excellent electrochemical performance and morphological characteristics, making it a potential solution for energy storage.
JOURNAL OF MATERIALS CHEMISTRY A
(2023)
Article
Chemistry, Physical
Mengjiao Shi et al.
Summary: This study reports a modified separator for commercial-sulfur-based lithium-sulfur batteries to improve their cycling stability and sulfur utilization.
ADVANCED ENERGY MATERIALS
(2022)
Article
Engineering, Environmental
Keding Li et al.
Summary: With the rapid development of nuclear energy, the pollution of uranium to water has become a major threat to human health. A study found that MXene/graphene oxide nanocomposite (MGN) can effectively remove uranium from water. MGN-2 showed excellent adsorption capacity and stability, making it a potential adsorbent for uranium removal.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Thermodynamics
Beilin Zuo et al.
Summary: Si@NC/AP and Si@PVDF/CL-20 composites with different Si contents were fabricated by spray-drying technique. Their flame structure, ignition delay time, and combustion process were investigated. The results showed that the Si-based fuel with 40 wt% of Si had the shortest ignition delay time. The core-shell structured composites exhibited better combustion performance with lower burn rate and slightly lower pressure exponent, as well as more fluffy combustion products.
COMBUSTION AND FLAME
(2022)
Article
Thermodynamics
Lu Liu et al.
Summary: The addition of Al-Mg alloys as fuel additives can enhance the combustion and agglomeration characteristics of composite propellants, with (Al/Mg)(0.5) offering the optimal balance of ignition, combustion, and agglomeration properties.
COMBUSTION AND FLAME
(2022)
Article
Chemistry, Multidisciplinary
Ruidong Song et al.
Summary: In this study, a two-dimensional metal clusters catalyst was successfully prepared to improve the thermal decomposition performance of AP. The catalyst showed good conductivity and strong gain-loss electron ability, which contributed to the enhanced thermal decomposition of AP and improved stability.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS
(2022)
Article
Energy & Fuels
Hadi Heydari et al.
Summary: In this study, two new nanocomposites of MoS2/MnO2 and POAP/MoS2/MnO2 were synthesized and characterized for their structure and performance. The POAP/MoS2/MnO2 composite exhibited excellent electrochemical performance and cycling stability, indicating its potential for higher energy storage devices.
JOURNAL OF ENERGY STORAGE
(2022)
Article
Chemistry, Physical
Yong Chen et al.
Summary: The effects of Sn-Cu, Sn-Co, and Sn-Ni intermetallic compounds on the thermal decomposition and ignition properties of RDX and TKX-50 were studied. The results show that these compounds can promote the thermal decomposition of RDX and reduce the exothermic peak temperature of TKX-50. Additionally, the compounds can reduce the ignition delay time and enhance the flame combustion intensity and propagation rate of both RDX and TKX-50.
JOURNAL OF ALLOYS AND COMPOUNDS
(2022)
Article
Chemistry, Physical
Haichao Fang et al.
Summary: This study successfully improved the aggregation issue and catalytic activities of metal salts in composite solid propellants by encapsulating cobalt and nickel compounds into oxidized carbon nanotubes channels. The nanocomposites showed significant effects on the thermal decomposition of ammonium perchlorate and hexogen, with enhanced catalytic efficiency.
JOURNAL OF ALLOYS AND COMPOUNDS
(2022)
Article
Materials Science, Ceramics
Jingjing Wang et al.
Summary: In this study, new MCo2O4/GO/Al nanothermites were prepared with high energy release and more violent combustion reaction. The introduction of GO significantly improved safety and enhanced electrostatic discharge sensitivity. MCo2O4/GO/Al nanothermites showed different catalytic performances on various energetic components, indicating the presence of selective catalyst.
CERAMICS INTERNATIONAL
(2022)
Article
Chemistry, Physical
Xuechun Xiao et al.
Summary: In this study, MCo2O4 catalysts with different Co species substituted with transition metal ion were prepared. These porous catalysts exhibited better catalytic performance for the thermal decomposition of ammonium perchlorate.
JOURNAL OF ALLOYS AND COMPOUNDS
(2022)
Article
Chemistry, Inorganic & Nuclear
T. C. Anusree et al.
Summary: This study investigates the catalytic effects of different nano catalysts, including cobalt-doped CuCr2O4, on the thermal decomposition of ammonium perchlorate (AP). The results show that cobalt-doped CuCr2O4 exhibits the highest catalytic efficiency and can significantly reduce the decomposition temperature of AP.
JOURNAL OF SOLID STATE CHEMISTRY
(2022)
Article
Chemistry, Applied
Bingwang Gou et al.
Summary: This investigation explores the application performance of nano-combustion catalyst CuCr2O4 in solid propellants. The results show that nano-CuCr2O4 can improve the surface defects of the propellant and significantly increase its density and burning rate. This catalyst is expected to be widely used in solid propellants.
PROPELLANTS EXPLOSIVES PYROTECHNICS
(2022)
Article
Chemistry, Physical
Dimitris Tsikritzis et al.
Summary: Hybrids of transition metal dichalcogenides (TMDs) nanoparticles on carbon-based materials have attracted attention due to their remarkable properties, and this study investigates the chemical interaction and morphology of Pd on MoS2 and MoS2-rGO substrates, as well as MoSx and MoSx-rGO hybrids. Characterization with synchrotron radiation and X-ray photoelectron spectroscopies reveals important insights into the interaction of Pd with these materials.
APPLIED SURFACE SCIENCE
(2022)
Article
Engineering, Environmental
Xue-Xue Zhang et al.
Summary: In this paper, high-energy solid propellant crystals coated with nanosized metal oxide catalysts were successfully prepared, which exhibited lower pressure exponent and higher combustion efficiency.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Materials Science, Multidisciplinary
Peng Deng et al.
Summary: In this study, flower-like MnO2 nanostructure was successfully fabricated and its application in the thermal-induced pyrolysis of energetic molecular perovskite DAP-4 was investigated. The results showed that the flower-like MnO2 nanostructure could effectively reduce the pyrolysis peak temperature of DAP-4 and increase its heat release.
Article
Chemistry, Multidisciplinary
Shengnan Li et al.
Summary: Cu/GO nanocomposites with different morphologies were synthesized and their catalytic performance for thermal decomposition of AP was investigated. The teardrop-shaped Cu/GO nanocomposites showed the highest specific surface area and the best catalytic performance. The addition of Cu/GO nanocomposites decreased the decomposition temperature and increased the exothermic heat released from AP. All four Cu/GO nanocomposites exhibited good stability.
Article
Materials Science, Ceramics
Keding Li et al.
Summary: A series of MXene/MnCo2O4.5 nanocomposites with different preparation methods were successfully synthesized. The hydrothermal method could load MnCo2O4.5 nanoparticles on MXene nanosheets to obtain MMC-W with 3D flower-like structure, showing excellent catalytic performance in AP decomposition.
CERAMICS INTERNATIONAL
(2021)
Article
Energy & Fuels
Ming Zhang et al.
Summary: The novel graphene-ferrocene nanocomposite showed improved combustion, anti-migration, safety, and mechanical properties in the AP-HTPB propellant, attributed to its positive effects on AP decomposition and gasphase products generation. The material also reduced electrostatic sensitivity and increased tensile strength of the propellant, showcasing the multifunctional capabilities of the composite.
Article
Chemistry, Physical
Xinlu Zhang et al.
Summary: The rational construction of hybrid materials has led to significant interest in energy storage electrode materials. The smart hybrid material in this study demonstrated exceptional cycling stability and high storage capacity, paving the way for the application of MXene-based hybrid materials in energy storage fields.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2021)
Article
Chemistry, Multidisciplinary
Yongfen Zhang et al.
Summary: The study investigated the catalytic decomposition of ammonium perchlorate by magnesium oxide nanoflakes. It was found that the addition of 2% by weight of MgO nanoflakes significantly increased the decomposition temperature of AP and reduced it in the second exothermic stage.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS
(2021)
Article
Chemistry, Physical
Teng Zhang et al.
Summary: In this study, hollow flower-like nickel particles were prepared using a facile polyol method and applied as combustion promoter in solid propellant. The diameter of the hollow particles could be accurately controlled by adjusting the concentration of the complex in the reaction solution. The addition of nickel powders promoted the exothermic decomposition of ammonium perchlorate, reducing the decomposition temperature and shifting the exothermic peak to a lower temperature range.
APPLIED SURFACE SCIENCE
(2021)
Article
Engineering, Environmental
Tao Chen et al.
Summary: Integration of schottky junction and defect engineering on adsorbent-semiconductors offers a promising strategy for photocatalytic reduction of U(VI). The BC-MoS2-x heterojunction exhibited high removal efficiency, cycle stability, and selective U(VI) removal in the presence of competing metal cations. The use of organic matter as a hole trapping agent to enhance U(VI) removal efficiency may pave the way for the development of rationally designed heterojunction photocatalysts.
CHEMICAL ENGINEERING JOURNAL
(2021)
Article
Engineering, Chemical
Xiangrui Zou et al.
Summary: A three-dimensional model was developed for capturing the burning properties of AP/HTPB composite propellant, and was verified and validated by comparing with analytical and experimental results. The influences of ellipsoidal AP's orientation and aspect ratio on the burning rate were investigated, flame structure of propellant with ellipsoidal AP particle was examined, and flame properties of propellant with spherical/ellipsoidal AP particle and different AP topologies were analyzed, showing reasonable matching with experimental results in calculating temperature sensitivity coefficients.
Article
Engineering, Environmental
Xu Zhao et al.
Summary: By utilizing a chemical method to transform high-active 1T phase molybdenum disulfide (1T-MoS2), significant improvements were achieved in the safety and decomposition performance of energetic materials in solid propellants, potentially influencing the design of solid propellants.
CHEMICAL ENGINEERING JOURNAL
(2021)
Article
Chemistry, Multidisciplinary
Jiayun Pei et al.
Summary: The GO/Fe2O3 nanocomposites synthesized via vacuum-freeze-drying method exhibit excellent catalytic performance in the thermal decomposition of ammonium perchlorate, showing potential for application in catalysis.
Article
Chemistry, Physical
Jing Lv et al.
Summary: A fast and mild solution-phase method was developed to synthesize d-Ti3C2Tx/ZnO composites. The composites showed superior catalytic performance and could be prepared easily without heating. Utilizing electrostatic interactions and hydrolysis processes, ZnO nanoparticles were rapidly generated on the delaminated Ti3C2Tx surface, offering great potential for large-scale batch preparation of other metal oxide and MXene composites.
APPLIED SURFACE SCIENCE
(2021)
Article
Chemistry, Physical
Keding Li et al.
Summary: The novel Co3O4@MXene nanocomposites (CMNs) were successfully fabricated by a facile, green method, exhibiting excellent catalytic performance and potential as a catalyst to promote the decomposition of ammonium perchlorate. The synthesis strategy of CMNs-3 could provide a new idea for the preparation of other metal oxide nanomaterials with high catalytic activity.
APPLIED SURFACE SCIENCE
(2021)
Article
Chemistry, Multidisciplinary
Yao Huang et al.
Summary: A new strontium 2D-MOF, {[Sr(AFCA)(2)(H2O)(2)]·2H(2)O}(n), was prepared and found to significantly affect the LTD stage of AP thermal decomposition, with a slight impact on the HTD stage. It acts as an efficient combustion inhibitor for AP thermal decomposition.
NEW JOURNAL OF CHEMISTRY
(2021)
Article
Chemistry, Applied
Xuezhen Zhou et al.
JOURNAL OF RARE EARTHS
(2020)
Article
Chemistry, Applied
Xiaoxia Li et al.
JOURNAL OF ENERGETIC MATERIALS
(2020)
Article
Chemistry, Physical
Haribandhu Chaudhuri et al.
Article
Chemistry, Multidisciplinary
Jingjing Wang et al.
Article
Chemistry, Analytical
Katerina Ioannou et al.
JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY
(2019)
Article
Chemistry, Applied
Yinghui Hu et al.
APPLIED ORGANOMETALLIC CHEMISTRY
(2019)
Review
Energy & Fuels
Claresta Dennis et al.
Article
Chemistry, Multidisciplinary
Lishuang Hu et al.
NEW JOURNAL OF CHEMISTRY
(2019)
Article
Engineering, Environmental
Qingxiang Yang et al.
CHEMICAL ENGINEERING JOURNAL
(2018)
Article
Materials Science, Multidisciplinary
Ying Chen et al.
MATERIALS RESEARCH BULLETIN
(2018)
Article
Materials Science, Multidisciplinary
Zongying Han et al.
MATERIALS & DESIGN
(2018)
Article
Chemistry, Multidisciplinary
Jianhua Xu et al.
Article
Multidisciplinary Sciences
Pawin Iamprasertkun et al.
SCIENTIFIC REPORTS
(2016)
Article
Materials Science, Ceramics
Lijuan Chen et al.
CERAMICS INTERNATIONAL
(2015)
Article
Materials Science, Ceramics
Yifu Zhang et al.
CERAMICS INTERNATIONAL
(2014)
Article
Engineering, Chemical
Haochun Shi et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
(2014)
Article
Chemistry, Multidisciplinary
Wufeng Chen et al.
ADVANCED MATERIALS
(2011)