☆ 4.7 Article

Study on the wear resistance and mechanism of AlCrCuFe2NiTix high-entropy surfacing alloys

JOURNAL OF ALLOYS AND COMPOUNDS (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Microstructure evolution and mechanical response of Co-free Ni2CrFeAl0.3Tix high-entropy alloys

X. X. Liu et al.

Summary: This study investigates the microstructure and mechanical behavior of Co-free Ni2CrFeAl0.3Tix high-entropy alloys. It is found that with an increase in Ti content, the yield and tensile strength of the alloys increase while the ductility decreases. A good balance between strength and ductility is achieved in Ni2CrFeAl0.3Ti0.3 alloy. The findings of this work provide insight into the design of low-cost Ti-containing alloys in the future.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

添加到收藏夹

Article Chemistry, Physical

High-strength and energetic Al2Ti6Zr2Nb3Ta3 high entropy alloy containing a cuboidal BCC/B2 coherent microstructure

Dongming Jin et al.

Summary: The present work developed a novel high-strength and energetic high entropy alloy with a BCC/B2 coherent microstructure. This alloy exhibits excellent thermal stability and mechanical properties, showing great potential as high-performance energetic structural materials.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

添加到收藏夹

Article Chemistry, Physical

L21-strengthened body-centered-cubic high-entropy alloy with excellent mechanical properties

Yake Xiao et al.

Summary: Introducing the second phase into high-entropy alloy through composition design is an effective strategy to improve its mechanical properties. In this study, a novel Fe35Cr35Ni15Al12Ti3 HEA was successfully designed and prepared. The HEA exhibited outstanding mechanical properties, attributed to the precipitation strengthening and solid-solution strengthening.

INTERMETALLICS (2022)

添加到收藏夹

Article Chemistry, Physical

Novel Ti-Zr-Hf-Nb-Fe refractory high-entropy alloys for potential biomedical applications

Wenjie Wang et al.

Summary: In this study, TiZrHfNbFex refractory high-entropy alloys (HEAs) were developed and their microstructure, mechanical properties, corrosion resistance, and wear resistance were investigated. The TiZrHfNbFe0.5 alloy exhibited excellent overall mechanical properties and superior corrosion resistance. Additionally, the wear resistance of the alloy increased with the increase in Fe content.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Excellent tensile properties induced by heterogeneous grain structure and dual nanoprecipitates in high entropy alloys

Shuang Qin et al.

Summary: The high entropy alloy Al0.5Cr0.9FeNi2.5V0.2 has been designed with heterogeneous grain structure and dual nanoprecipitates, resulting in improved strength and ductility after aging. The aged samples exhibit better synergy of strength and ductility, with a higher hardening rate.

MATERIALS CHARACTERIZATION (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

The B2 phase-driven microstructural heterogeneities and twinning enable ultrahigh cryogenic strength and large ductility in NiCoCr-based medium-entropy alloy

D. D. Zhang et al.

Summary: This study designed a duplex medium-entropy alloy with outstanding mechanical responses at low temperatures, showing that its strength and ductility vary with temperature. The alloy exhibits excellent strength-ductility synergy, especially with unique B2 cracking behavior observed at low temperatures.

ACTA MATERIALIA (2022)

添加到收藏夹

Article Chemistry, Physical

Investigation on the relationship between reinforcing behavior of TiN and wear resistance of AlCoCrCuNiTi high-entropy alloy coating

Gang Liang et al.

Summary: TiN-reinforced high-entropy alloy coating demonstrates excellent performance in improving wear resistance and service life of the coating.

APPLIED SURFACE SCIENCE (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Refinement strengthening, second phase strengthening and spinodal microstructure-induced strength-ductility trade-off in a high-entropy alloy

Wei Zhang et al.

Summary: This study investigated the mechanical properties and deformation mechanisms of as-cast and cold rolled-annealed high-entropy alloy samples. The cold-rolled and annealed sample showed higher yield strength, ultimate strength, and good ductility compared to the as-cast sample. The RA sample exhibited significant changes in grain size, phase volume fraction, and dislocation walls.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Chemistry, Physical

Atomistic understanding of incipient plasticity in BCC refractory high entropy alloys

Xiaorong Liu et al.

Summary: This study investigated the initial dislocation nucleation and motion mechanisms in TaTiZrV high-entropy alloys (RHEAs) and their dependence on temperature through molecular dynamics simulations. The short-range orders in the RHEA facilitate preferential inhomogeneous nucleation at low stress, while compositional fluctuation affects the slipping and moving rate of dislocations. Moreover, the difficulty of initial dislocation nucleation increases with temperature.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strengthening behavior of AlCoCrFeNi(TiN)x high-entropy alloy coatings fabricated by plasma spraying and laser remelting

Bingqian Jin et al.

Summary: In this study, HEA coatings with improved wear resistance were fabricated by plasma spray and subsequent laser remelting. The dispersion of hard phase and nano-particles resulting from the second heating significantly increased the microhardness and wear resistance performance of the coatings.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure evolution and mechanical properties of diffusion bonding Al5(TiZrHfNb)95 refractory high entropy alloy to Ti2AlNb alloy

Y. J. Du et al.

Summary: In this study, diffusion bonding of refractory high entropy alloy Al-5(TiZrHfNb)(95) with intermetallic compound Ti2AlNb was conducted under different temperatures, revealing the microstructure evolution and mechanical properties. The presence of Al3Zr5 phase in the joint interface was found to impact the shear strength, with higher bonding temperatures resulting in higher strength but lower Al3Zr5 content. Increasing bonding temperature led to a transition from intergranular brittle to ductile fracture in the joints.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Chemistry, Physical

In-situ Ti(C, N) reinforced AlCoCrFeNiSi-based high entropy alloy coating with functional gradient double-layer structure fabricated by laser cladding

Guanghua Yan et al.

Summary: A functional gradient double-layer structure coating of AlCoCrFeNiSi-based high entropy alloy with in-situ Ti(C, N) reinforcement was successfully fabricated using laser cladding. The presence of Ti(C, N) ceramic particles contributed to the high surface hardness and wear resistance of the coating, improving the wear resistance of the H13 substrate significantly.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Novel Soft-Magnetic B2-Based Multiprincipal-Element Alloy with a Uniform Distribution of Coherent Body-Centered-Cubic Nanoprecipitates

Yue Ma et al.

Summary: The novel soft-magnetic alloy Al1.5Co4Fe2Cr exhibits high saturation magnetization, low coercivity, high Curie temperature, and high electrical resistivity, making it promising for soft magnets. The excellent stability of the coherent microstructure enables the retention of these prominent soft-magnetic properties even after thermal exposure at high temperatures.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Engineering, Mechanical

Correction of Archard equation for wear behavior of modified pure titanium

Arvin Taghizadeh Tabrizi et al.

Summary: This paper investigates a correction to the Archard equation by considering the influence of surface conditions and parameters like hardness, roughness, and slope after surface modification. Experimental results validate the proposed correction, showing the importance of these factors in predicting wear behavior.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Engineering, Mechanical

Mechanical and dry sliding tribological properties of CoCrNiNbx medium-entropy alloys at room temperature

Yulin Liu et al.

Summary: The CoCrNiNbx medium-entropy alloys were successfully prepared via arc-melting and casting injection technique, displaying different categories and properties. Among them, the CoCrNiNb0.385 MEA is attracting attention for its full lamellar eutectic structure and excellent mechanical properties. In terms of tribological properties, this material exhibits the lowest friction coefficient and wear rate, attributed to uniform co-deformation between FCC and Laves phases in the eutectic MEA.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Chemistry, Physical

Microstructure and properties of laser cladding and CoCr2.5FeNi2Tix high-entropy alloy composite coatings

Zhen Gu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase inversion in a two-phase, BCC+B2, refractory high entropy alloy

V. Soni et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

In-situ TiC reinforced CoCrCuFeNiSi0.2 high-entropy alloy coatings designed for enhanced wear performance by laser cladding

Yajun Guo et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

A new strategy of tailoring strength and ductility of CoCrFeNi based high-entropy alloy

Fukai Zheng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Laser-coated CoFeNiCrAlTi high entropy alloy onto a H13 steel die head

Michael T. Wall et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of Ti Addition on the Microstructure and Property of FeAlCuCrNiMo0.6 High-Entropy Alloy

Yunhai Su et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Hierarchical Eutectoid Nano-lamellar Decomposition in an Al0.3CoFeNi Complex Concentrated Alloy

Sriswaroop Dasari et al.

SCIENTIFIC REPORTS (2020)

添加到收藏夹

Article Chemistry, Physical

Microstructural characteristics and properties of CoCrFeNiNbx high-entropy alloy coatings on pure titanium substrate by pulsed laser cladding

Kang Xiang et al.

APPLIED SURFACE SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermal stability of (CoCrFeNi)94Ti2Al4 alloy containing coherent nanoprecipitates at intermediate temperatures

Y. Zheng et al.

MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructural characterization and corrosion behaviour of AlCoCrFeNiTix high-entropy alloy coatings fabricated by laser cladding

Jian Liu et al.

SURFACE & COATINGS TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Physical

Influence of NbC particles on microstructure and mechanical properties of AlCoCrFeNi high-entropy alloy coatings prepared by laser cladding

Xiaofeng Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of FexCoCrNiMn high-entropy alloys

Tao Zhang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of temperature on the tribological behavior of Al0.25CoCrFeNi high-entropy alloy

L. M. Du et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

A New Design of In Situ Ti(C,N) Reinforced Composite Coatings and Their Microstructures, Interfaces, and Wear Resistances

Mingliang Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Chemistry, Physical

High temperature wear performance of laser-cladded FeNiCoAlCu high-entropy alloy coating

Guo Jin et al.

APPLIED SURFACE SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and wear properties of nitrided AlCoCrFeNi high-entropy alloy

Yongxiang Wang et al.

MATERIALS CHEMISTRY AND PHYSICS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

The microstructures and properties changes induced by Al:Co ratios of the AlXCrCo2-XFeNi high entropy alloys

Yuqiao Zhao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Materials Science, Coatings & Films

Hot wire-assisted gas metal arc welding of hypereutectic FeCrC hardfacing alloys: Microstructure and wear properties

Karsten Guenther et al.

SURFACE & COATINGS TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Wear behavior of Al0.6CoCrFeNi high-entropy alloys: Effect of environments

Ming Chen et al.

JOURNAL OF MATERIALS RESEARCH (2018)

添加到收藏夹

Article Materials Science, Coatings & Films

Effect of nitrogen alloying on the microstructure and abrasive impact wear resistance of Fe-Cr-C-Ti-Nb hardfacing alloy

Jibo Wang et al.

SURFACE & COATINGS TECHNOLOGY (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

A cuboidal B2 nanoprecipitation-enhanced body-centered-cubic alloy Al0.7CoCrFe2Ni with prominent tensile properties

Qing Wang et al.

SCRIPTA MATERIALIA (2016)

添加到收藏夹

Article Physics, Multidisciplinary

A Criterion for Topological Close-Packed Phase Formation in High Entropy Alloys

Yiping Lu et al.

ENTROPY (2015)

添加到收藏夹

Article Chemistry, Physical

Effects of electro-negativity on the stability of topologically close-packed phase in high entropy alloys

Yong Dong et al.

INTERMETALLICS (2014)

添加到收藏夹

Article Chemistry, Physical

Effect of Ti content on structure and properties of Al2CrFeNiCoCuTix high-entropy alloy coatings

X. W. Qiu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

添加到收藏夹

Article Chemistry, Physical

Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys

Woei-Ren Wang et al.

INTERMETALLICS (2012)

添加到收藏夹

Article Physics, Applied

Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys

Sheng Guo et al.

JOURNAL OF APPLIED PHYSICS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes

JW Yeh et al.

ADVANCED ENGINEERING MATERIALS (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.