☆ 4.7 Article

Dynamic recrystallization mechanism of Ti-6554 alloy during high-temperature deformation

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Chemistry, Physical

A review of microstructure and texture evolution during plastic deformation and heat treatment of β-Ti alloys

Aman Gupta et al.

Summary: This study reviews the microstructure and texture evolution of near beta, meta-stable beta, and stable beta-Ti alloys during plastic deformation and annealing treatment. Factors such as shear bands, martensite, dislocations, and precipitation significantly affect mechanical properties, while the deformation process influences microstructure and texture evolution. The activation of deformation mechanisms and presence of certain phases impact the ductility and strength of beta-Ti alloys, demonstrating the complexity of their mechanical behavior.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Characterization of hot deformation and microstructure evolution of a new metastable β titanium alloy

Zhao-qi Chen et al.

Summary: The hot deformation characteristics of Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe-0.1B-0.1C alloy were investigated by hot compression tests. The flow stress decreases with the increase of temperature and the decrease of strain rate. The microstructure is sensitive to deformation parameters, and dynamic recrystallization prefers to happen at high temperature and low strain rate.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dynamic recrystallization behavior of a Mo-2.0%ZrO2 alloy during hot deformation

Zhaoning Xu et al.

Summary: In this study, the high-temperature deformation process of molybdenum alloy reinforced by 2.0%ZrO2 was investigated, and the microstructure evolution was analyzed. The relationship between deformation temperature, strain rate, and flow stresses was established. The research found that the alloy mainly undergoes dynamic recrystallization at high temperatures and low strain rates, with partial dynamic recrystallization occurring at high strain rates and low temperatures. Additionally, the alloy has low activation energy, making it suitable for hot working, and exhibits two typical textures after high temperature deformation.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

High-temperature deformation behavior and recrystallization mechanism of a near beta titanium alloy Ti-55511 in ? phase region

Shuangxi Shi et al.

Summary: Isothermal compression tests, EBSD observations, and quantitative analysis were conducted to investigate the high-temperature deformation behavior and recrystallization mechanism of Ti55511 alloy in the beta phase region. The study revealed that dynamic recovery (DRV) and dynamic recrystallization (DRX) are the main soften mechanisms, with DRX becoming more significant with decreasing strain rate and increasing deformation temperature and true strain.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Chemistry, Physical

Study on microstructure evolution and deformation mechanism of Ti-6554 based on power dissipation efficiency at supertransus temperatures

Changmin Li et al.

Summary: This study investigates the microstructure evolution and deformation mechanism of a Ti-6Cr-5Mo-5 V-4Al (Ti-6554) alloy during high temperature compression based on the power dissipation efficiency (eta). The results show that increasing the temperature and decreasing the strain rate can promote the dynamic recrystallization (DRX) process. Two types of DRX, namely, discontinuous dynamic recrystallization (DDRX) and continuous dynamic recrystallization (CDRX), are found. Moreover, by analyzing the change of eta throughout the strain range, as well as the peak eta under different conditions, this study establishes a link between eta and the corresponding deformation mechanism of the Ti-6554 alloy.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Chemistry, Physical

Hot deformation behavior, processing map, microstructure evolution and dynamic recrystallization mechanism of Mg-5Al-0.6Sc alloy

Lei Zhang et al.

Summary: This study investigated the effect of deformation temperature and strain rate on the hot deformation mechanism of an as-cast Mg-5Al-0.6Sc alloy. The results showed that the flow stress decreased with increasing temperature and decreasing strain rate. A constitutive equation was established to accurately predict the hot deformation behavior of the alloy. The optimal processing area was determined based on processing maps, and the microstructure evolution and dynamic recrystallization mechanism of the alloy were analyzed.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Analyzing time series of serrated flow and the dependence on structural heterogeneity in Al-Mg-Sc alloy

J. Xie et al.

Summary: Friction stir processing improved the mechanical properties of Al-Mg-Sc alloy and caused serrated heterogeneity in the stirred zone. The dependence between structural heterogeneity and serrated heterogeneity was explored, and it was found that microstructure can dominate serrated behavior. The formation and transformation of Portevin-Le Chatelier types in serrated heterogeneity were explained using the time series of strain and strain rate.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dynamic recrystallization mechanism and near-isotropic mechanical properties of WE43 magnesium alloy sheets rolled at different temperatures

Qiankun Li et al.

Summary: The dynamic recrystallization behavior and mechanical properties of WE43 magnesium alloy during hot rolling were studied. It was found that at lower temperatures, the sheets cracked and no dynamic recrystallization grains were observed, with twinning contributing more to plastic deformation. However, at higher rolling temperatures, the alloy exhibited good rolling ability and slip dominated plastic deformation. The recrystallization mechanism involved continuous dynamic recrystallization, with grains nucleating along the original grain boundaries and geometrically necessary dislocations occurring within parent grains. Twin-induced recrystallization grains were also observed at the early stage of the rolling process at a specific temperature. Rolled sheets at suitable temperatures showed similar strength and fracture elongation, without obvious anisotropy.

MATERIALS CHARACTERIZATION (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dynamic recrystallization behavior and numerical simulation of S280 ultra-high strength stainless steel

Kaiming Zhang et al.

Summary: The S280 ultra-high strength stainless steel was subjected to isothermal constant strain rate compression experiments to analyze its flow behavior and establish models for dynamic recrystallization. The results showed that the flow stress of the steel increased with increasing strain rate and decreasing deformation temperature. The distribution of dynamic recrystallization volume fraction and average grain size was non-uniform after thermal compression, and increased with increasing deformation temperature and decreasing strain rate. The numerical simulation results were in good agreement with the experimental results, providing a theoretical basis for microstructure control during thermal deformation.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of strain rates on high temperature deformation behaviors and mechanisms of Ti-5Al-5Mo-5V-3Cr-1Zr alloy

Hui Zhang et al.

Summary: The isothermal compression tests of Ti-5Al-5Mo-5V-3Cr-1Zr alloy at 900 degrees C showed a significant increase in flow stress and a decrease in central deformation band thickness with increasing strain rate. Discontinuous yielding behavior was observed at strain rates of 0.1 s(-1) and 1 s(-1). Continuous and discontinuous recrystallization occurred at different strain rates. With a strain rate of 1 s(-1), dynamic recovery and continuous dynamic recrystallization were observed.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

The interplay relationship between phase transformation and deformation behavior during hot compression in a metastable β titanium alloy

Ke Hua et al.

Summary: The hot compression behavior of a metastable beta titanium alloy at 600 degrees C was investigated to analyze the correlation between phase transformation and deformation behavior. The study revealed the presence of four distinct stages in the deformation behavior: near linear hardening, discontinuous yielding, hardening after discontinuous yielding, and final softening. The phase transformation and movement of dislocations play crucial roles in the hardening and softening behavior at different stages of deformation.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dynamic recrystallization behavior and microstructure evolution of a new Mg-6Zn-1Gd-1Er alloy with and without pre-aging treatment

Bo Che et al.

Summary: The study compared the DRX behavior and microstructure evolution of a new Mg-6Zn-1Gd-1Er alloy with and without pre-aging treatment. The pre-aging treatment sample was found to be more conducive to DRX, with lower deformation activation energy.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hot deformation and dynamic recrystallization in Al-Mg-Si alloy

Jiachen Li et al.

Summary: The hot deformation behavior of Al-Mg-Si alloys was studied through isothermal compression tests, revealing that the dynamic recrystallization mechanism depends on the Zener-Hollomon values. Three different DRX mechanisms were observed during the experimental process.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Negative strain rate sensitivity of a Ti-8Al-1Mo-1V alloy with bimodal microstructure under quasi-static compression

X. H. Shi et al.

Summary: The compression behavior of a Ti-8Al-1Mo-1V alloy with bimodal microstructure was studied in various strain rates, showing a positive-negative-positive changing tendency in strain rate sensitivity and serrated flow behavior. It was found that dynamic strain aging caused by solute atom dislocation interaction plays a role in the appearance of serrations and negative strain rate sensitivity, with the reasons for positive strain rate sensitivity also being analyzed.

MATERIALS LETTERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and texture evolution of TB8 titanium alloys during hot compression

Qiu-Yue Yang et al.

Summary: The study found that the dynamic recrystallization behavior of TB8 titanium alloys is sensitive to strain, with DRX increasing as true strain increases. Recrystallization mechanisms include discontinuous dynamic recrystallization and continuous dynamic recrystallization. Texture evolution during hot deformation process showed changes in texture components with increasing strain.

RARE METALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hot deformation behavior and mechanism of a new metastable ? titanium alloy Ti?6Cr?5Mo?5V?4Al in single phase region

Changmin Li et al.

Summary: The new metastable titanium alloy Ti-6Cr-5Mo-5V-4Al (Ti-6554) has shown good application potential in large parts. Through hot compression tests and the use of a strain-compensated Arrhenius constitutive model, the flow behavior of the alloy was predicted and characteristics of dynamic recrystallization were observed.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Chemistry, Physical

Effect of temperature and strain rate on the deformation behavior of Ti5321 during hot-compression

B. Gu et al.

Summary: The deformation temperature and strain rate influenced the deformation mechanism and texture formation of the metastable beta-titanium alloy Ti5321 during hot-compression. Decreasing Zener-Hollomon parameter Z led to a shift towards dynamic recovery and dynamic recrystallization, resulting in a < 100 > < 111 > double-fiber texture. Dynamic globularization of the alpha-phase and promotion of beta-grain formation by continuous dynamic recrystallization contributed to the flow softening behavior of Ti5321.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

In-situ study on tensile deformation and damage evolution of metastable β titanium alloy with lamellar microstructure

Jing Wang et al.

Summary: The study found that the metastable beta titanium alloy exhibits various deformation modes during tensile process, including dislocation slip, phase interface shear, and grain boundary shear. Due to localized stress concentration and inhomogeneous deformation, microvoids are prone to form at positions such as grain boundaries, phase interfaces, tips of beta interlayers, etc. Additionally, crack propagation follows a zigzag path resulting in an intergranular and transgranular mixed fracture mode.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the nature of a peculiar initial yield behavior in metastable β titanium alloy Ti-5Al-5Mo-5V-3Cr-0.5Fe with different initial microstructures

Jiangkun Fan et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Modified kinetic model for describing continuous dynamic recrystallization behavior of Al 2219 alloy during hot deformation process

Lei Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Diffusional-displacive transformation in a metastable β titanium alloy and its strengthening effect

Lu Qi et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Flow softening mechanismin isothermal compression of β-solidifying γ-TiAl alloy

R. R. Xu et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dynamic recrystallization mechanism and improved mechanical properties of a near α high temperature titanium alloy processed by severe plastic deformation

Yonggang Sun et al.

MATERIALS CHARACTERIZATION (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

A critical assessment of experimental investigation of dynamic recrystallization of metallic materials

H. K. Zhang et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evaluation of the hot workability and deformation mechanisms for a metastable beta titanium alloy prepared from powder

Q. Y. Zhao et al.

MATERIALS CHARACTERIZATION (2019)

添加到收藏夹

Article Chemistry, Physical

Phase transformation and dynamic recrystallization behaviors in a Ti55511 titanium alloy during hot compression

Y. C. Lin et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of strain rates and twins evolution on dynamic recrystallization mechanisms of austenite stainless steel

Xinyun Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Chemistry, Physical

Dynamic recrystallization of Ti-5553 alloy during sub-transus thermomechanical processing: Mechanisms and its role in formation of a bi-modal structure

Dongyang Qin et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Chemistry, Physical

Deformation behaviour and mechanisms during hot compression at supertransus temperatures in Ti-10V-2Fe-3A1

Juan Zhao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Chemistry, Physical

Characterization of high-temperature deformation behavior and processing map of TB17 titanium alloy

Zhe Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Deformation behavior and microstructure evolution during hot working of a coarse-grained Ti-5Al-5Mo-5V-3Cr-1Zr titanium alloy in beta phase field

X. G. Fan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Deformation banding in β working of two-phase TA15 titanium alloy

Xiao-guang Fan et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Characterization of Hot Deformation Behavior of a New Near-β Titanium Alloy: Ti555211

Zhen An et al.

HIGH TEMPERATURE MATERIALS AND PROCESSES (2016)

添加到收藏夹

Article Chemistry, Physical

Strain rate dependent microstructural evolution during hot deformation of a hot isostatically processed nickel base superalloy

S. S. Satheesh Kumar et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Hot deformation behavior and microstructural evolution of beta C titanium alloy in β phase field

Xin Xu et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Characterization of discontinuous yielding phenomenon in isothermal compression of TC8 titanium alloy

Ke Wang et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review of dynamic recrystallization phenomena in metallic materials

K. Huang et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Chemistry, Physical

Effects of cold pre-deformation on aging behavior and mechanical properties of Ti-1300 alloy

Mingpan Wan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Flow softening mechanism of Ti-5Al-2Sn-2Zr-4Mo-4Cr with different initial microstructures at elevated temperature deformation

L. Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

A physically-based constitutive model for a typical nickel-based superalloy

Y. C. Lin et al.

COMPUTATIONAL MATERIALS SCIENCE (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Study on the dynamic recrystallization behavior of Ti-alloy Ti-10V-2Fe-3V in β processing via experiment and simulation

D. L. OuYang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Deformation Mechanisms in the Near-β Titanium Alloy Ti-55531

Martina Dikovits et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions

Taku Sakai et al.

PROGRESS IN MATERIALS SCIENCE (2014)

添加到收藏夹

Article Chemistry, Physical

A study on the microstructures and tensile properties of new beta high strength titanium alloy

Cheng-Lin Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of solution temperature on microstructures and tensile properties of high strength Ti-6Cr-5Mo-5V-4Al alloy

Cheng-Lin Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of β treatments on microstructures and mechanical properties of TC4-DT titanium alloy

Xiaona Peng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Serrated flow behavior in a near alpha titanium alloy IMI 834

Kartik Prasad et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of heat treatment on tensile behaviour of Ti-6Al-5Zr-0.5Mo-0.25Si alloy

Anil Kumar Nag et al.

BULLETIN OF MATERIALS SCIENCE (2006)

添加到收藏夹

Article Mechanics

Prediction of flow stress at hot working condition

S Serajzadeh et al.

MECHANICS RESEARCH COMMUNICATIONS (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.