☆ 4.7 Article

Unveiling the strengthening mechanisms of as-cast micro-alloyed CrMnFeCoNi high-entropy alloys

Journal of Alloys and Compounds (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

The as-cast AlxCrTaTi refractory medium entropy alloys with good room- temperature mechanical properties and high-temperature oxidation resistance

Hongju Zhang et al.

Summary: This study systematically investigates the room-temperature mechanical properties and high-temperature oxidation resistance of AlxCrTaTi RMEAs. The results show that AlxCrTaTi RMEAs possess high yield strength and plasticity, and the Al0.25CrTaTi alloy exhibits good oxidation resistance at high temperature.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

添加到收藏夹

Article Chemistry, Physical

Powder metallurgical processing of CrMnFeCoMo high entropy alloy: Phase evolution, microstructure, thermal stability and mechanical properties

Priyatosh Pradhan et al.

Summary: The present investigation focuses on the phase evolution, microstructure, thermal stability, and microhardness properties of an equiatomic quinary high entropy alloy Cr-Mn-Fe-Co-Mo. The alloy was synthesized via mechanical alloying and pressure-less sintering. The phase formation and composition were analyzed using X-ray diffraction, electron microscopy, and differential thermal analysis. The sintered sample exhibited the coexistence of four stable phases and high hardness and Young's modulus.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

添加到收藏夹

Review Materials Science, Multidisciplinary

Twenty years of the CoCrFeNiMn high-entropy alloy: achieving exceptional mechanical properties through microstructure engineering

Hamed Shahmir et al.

Summary: The CoCrFeNiMn alloy, a multicomponent high-entropy alloy (HEA), has been extensively studied due to its exceptional properties and potential industrial applications. However, there is a challenge of achieving a balance between strength and ductility, which can be addressed by adding a sixth element or applying thermomechanical processing. This review focuses on the deformation mechanisms and microstructural evolutions of the alloy under different conditions, providing insights for its processing and manufacturing. Additionally, the behavior of the alloy under high temperature exposure and cyclic loading is discussed, highlighting the potential for future enhancement and optimization of this and other comparable HEAs.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Precipitation behaviors of the rapidly-solidified Allvac 718Plus superalloy during aging treatment

Liting Tang et al.

Summary: In this work, the precipitation behavior of Allvac 718Plus superalloy during aging is investigated. The evolution of the strengthening gamma' phase and the gamma'/gamma'' co-precipitates during aging is examined, and the formation of delta-Ni3Nb phase, eta phase, and sigma phase is also studied. The research findings provide insights into the microstructural changes that occur in Allvac 718Plus alloy at elevated temperatures.

MATERIALS CHARACTERIZATION (2023)

添加到收藏夹

Article Chemistry, Physical

Effect of Grain Size on the Tribological Behavior of CoCrFeMnNi High Entropy Alloy

Ying Wang et al.

Summary: The effect and mechanism of grain sizes on the tribological behavior of CoCrFeMnNi high entropy alloy were studied. Adhesive wear was the primary wear mechanism under normal low load and low sliding speed. With the increase in sliding speed, the wear mechanisms changed to adhesive wear and oxidation wear. The fine grain size HEA sample showed better wear resistance due to its high surface strength.

MATERIALS (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dissolution kinetics of Laves phase during homogenization heat treatment of additively manufactured Inconel 718 superalloy

Sajad Ghaemifar et al.

Summary: The dissolution kinetics of the undesirable Laves phase in Inconel 718 was investigated through homogenization heat treatment. The activation energy and kinetic characteristics of Laves phase dissolution were determined, and the diffusion of Nb in Ni was identified as the key mechanism.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

添加到收藏夹

Article Chemistry, Physical

Influence of plastic deformation on the corrosion behavior of CrCoFeMnNi high entropy alloy

Ying Wang et al.

Summary: Plastic deformation weakens the protective ability of the passive film, increases electrochemical dynamics and galvanic corrosion rate, consequently lowering the corrosion resistance of CrCoFeMnNi high entropy alloy.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Chemistry, Physical

Mechanical response of as-cast equiatomic high entropy alloy CuFeCoNiMn

Nitish Bibhanshu et al.

Summary: The mechanical behavior of a cast CuMnNiFeCo high entropy alloy with larger grains and micro-porosities was investigated at room temperature. Despite the presence of large grain size and micro-porosities, the alloy exhibited high strength and good ductility. The formation and growth of deformation twins may contribute to the hardening response of the alloy.

INTERMETALLICS (2022)

添加到收藏夹

Article Chemistry, Physical

Microstructure and texture of severely warm-rolled and annealed coarse-grained CoCrNi medium entropy alloy (MEA): A perspective on the initial grain size effect

J. Saha et al.

Summary: This study investigated the microstructure and texture formations in a coarse-grained starting material and a fine-grained starting material of equiatomic CoCrNi MEA after severe warm-rolling and annealing. The results showed that both materials developed an ultrafine microstructure with limited effect of starting grain size on microstructure and texture formation. The annealed specimens exhibited a remarkable strength-ductility balance due to the ultrafine microstructure and solid solution strengthening.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Review Chemistry, Physical

A review of hot deformation behavior and constitutive models to predict flow stress of high-entropy alloys

Zeinab Savaedi et al.

Summary: This review article provides an overview of the hot deformation behavior and constitutive description of flow stress in high entropy alloys (HEAs). The potential of hot working for grain refinement, reduction of casting defects, and enhancement of mechanical properties of HEAs is explained. The effects of processing parameters, alloying elements, dynamic precipitation, and the presence of phases on the hot deformation behavior and restoration processes are discussed. The application of processing maps for characterizing flow instability, cracking, flow softening, and dynamic recrystallization during hot forming of HEAs is presented. Various constitutive models and methods for flow stress modeling and flow curve prediction are assessed. Suggestions for future research works are proposed.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Eutectic Reaction and Microstructure Stability in CoCrFeNiNbx High-Entropy Alloys

Xu Cao et al.

Summary: This study experimentally and thermodynamically investigates seven arc-melted and annealed CoCrFeNiNbx (x = 0.3-0.6) alloys. The microstructure of the alloys is found to be significantly affected by cooling rate and annealing treatment. A method of strengthening the alloy by precipitating a T phase is proposed.

METALS (2022)

添加到收藏夹

Article Chemistry, Physical

Analysis of phase transformation and deformation behaviors on Laves phase of as-cast (CoCuFeNi)100-xZrx high entropy alloys

Jong Woo Choi et al.

Summary: This study investigates the effects of Zr contents on the microstructure, phase, mechanical properties, and deformation behavior of CoCuFeNi medium entropy alloy (MEA). The addition of Zr increases the mechanical properties and work-hardening rate of the alloy, and changes the slope of the stress-strain curve through a phase transformation mechanism.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Solidification segregation-driven microstructural evolution of trace yttrium-alloyed TaMoNbZrTiAl refractory high entropy alloys

Yueling Guo et al.

Summary: In this study, the rare-earth element alloying strategy was used to tune the microstructure and mechanical properties of a refractory high entropy alloy. The alloying of trace Y intensified solidification segregation and drove the microstructural evolution. The experiments showed a slight beneficial effect of the alloying on the compressive strength and fracture strain.

MATERIALS CHARACTERIZATION (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Post-processing of additively manufactured high-entropy alloys-A review

Hasti Khodashenas et al.

Summary: This article reviews the heat treatment methods for additive manufacturing of high-entropy alloys (HEAs), including hot isostatic pressing (HIP), annealing/solutionizing treatment, aging treatment, and deep cryogenic treatment (DCT). These treatments can improve the mechanical and functional properties of additively manufactured HEAs, and important suggestions for future research are proposed.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fabrication and performance of SiC-reinforced Cu: Role of the aspect ratio of the SiC reinforcement phase

Lu Han et al.

Summary: SiC particle and SiC whisker-reinforced Cu composites were prepared using pulse intermittent deposition and spark plasma sintering. The formation of core-shell structures solved the agglomeration problem and increased the bonding strength of the interface. The Cu-coated SICW exhibited significantly higher strength, plasticity, and thermal conductivity, and the externally applied load was effectively transferred. This study provides an advanced approach for designing high-performance metal-matrix composites with tailored aspect ratios of discontinuous second phases.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

The way to improve strength and ductility of heavily carbon-alloyed high-entropy Fe20Mn20Cr20Ni20Co15C5 alloy

S. V. Astafurov et al.

Summary: This study introduces a new approach to improve the strength and ductility of heavily carbon-alloyed high entropy Fe20Mn20Cr20Ni20Co15C5 alloy, achieving a 4-times increase in ductility and high values of strength characteristics through a novel thermal treatment regime.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Novel Alloy Design Concepts Enabling Enhanced Mechanical Properties of High Entropy Alloys

Jitesh Kumar et al.

Summary: The emergence of High Entropy Alloys (HEAs) has shifted the alloy design strategy to multi-principal elements, allowing the development of advanced materials with unique properties. With the help of high throughput experiments, computational tools, and artificial intelligence, it is possible to develop multi-principal element alloys with tailored solid solution strengthening, stacking fault energy, and microstructure.

FRONTIERS IN MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Design of multicomponent alloys with C14 laves phase structure for hydrogen storage assisted by computational thermodynamic

Jessica Bruna Ponsoni et al.

Summary: This study presents a strategy to design multicomponent alloys for hydrogen storage using computational thermodynamics. The thermodynamic properties and formation of C14 Laves phase in multicomponent alloys were investigated, leading to the calculation of PCT diagrams for 440 alloys. These alloys, with the C14 Laves phase structure, show potential for various room temperature hydrogen storage applications.

ACTA MATERIALIA (2022)

添加到收藏夹

Article Chemistry, Physical

Toward tunable microstructure and mechanical properties in additively manufactured CoCrFeMnNi high entropy alloy

Hongge Li et al.

Summary: The effects of laser energy density (LED) on the microstructure and mechanical properties of single-track CoCrFeMnNi high entropy alloy (HEA) samples fabricated by laser directed energy deposition (LDED) were studied. The results showed that increasing LED led to larger molten pool size, increased grain size, and decreased micro-hardness in the samples. The relationship among processing parameters, cooling rate, and grain size was investigated through numerical simulation and experimental observations.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Chemistry, Physical

Outstanding yield strength of CoCrNiTa0.1 medium entropy alloy under the synergistic regulated with nanoprecipitation and grain refining

Hao Zhang et al.

Summary: CoCrNiTa0.1 medium-entropy alloy shows outstanding yield strength of 1339 MPa, much higher than CoCrNi alloy, due to the combined effects of fine grain strengthening and precipitation strengthening. The alloy consists of Ta-enriched Laves phase and fine-grained face-centered cubic (FCC) phase, with small grains contributing to superior fine grain strengthening. The precipitated Ta-enriched Laves phase greatly enhances the alloy's mechanical strength.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Chemistry, Physical

Precipitation phase and twins strengthening behaviors of as-cast non-equiatomic CoCrFeNiMo high entropy alloys

Xuefeng Gao et al.

Summary: To regulate the strengthening behaviors of as-cast HEAs, molybdenum (Mo) was added to the CoCrFeNi HEA. With increasing Mo content, the phase composition of the as-cast alloy transformed from single phase solid solution to a dual-phase structure. The addition of Mo caused lattice distortion and reduced stacking fault energy, resulting in increased yield strength. The HMo4 alloy exhibited good plasticity and high yield strength and tensile strength.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of titanium addition on the microstructure and mechanical properties of quaternary CoCrFeNi high entropy alloy

M. Karimzadeh et al.

Summary: The effects of minor Ti addition on the microstructure and mechanical properties of the CoCrFeNi high entropy alloy were studied. The results showed that Ti segregation resulted in the precipitation of the R-phase and serrated grain boundaries during solidification. The addition of Ti improved the shear properties of the alloy due to simultaneous grain refinement and the formation of tortuous grain boundaries.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Multicomponent high-entropy Cantor alloys

B. Cantor

Summary: Multicomponent high-entropy Cantor alloys, discovered in the late 1970s, occupy a vast region of multi-component phase space and exhibit excellent mechanical properties due to high configurational entropy. The complexity of local atomic configurations and associated lattice strains in these alloys contributes to their unique characteristics and potential for further enhancement and optimization.

PROGRESS IN MATERIALS SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Segregation engineering of grain boundaries of a metastable Fe-Mn-Co-Cr-Si high entropy alloy with laser-powder bed fusion additive manufacturing

Saket Thapliyal et al.

Summary: Laser-powder bed fusion additive manufacturing provides powerful microstructural fine-tuning capabilities, but the effects of solute segregation on alloys during processing are still not well understood. This study demonstrates that controlling solute segregation can significantly affect the microstructure and mechanical properties of high-entropy alloys, offering new insights for optimizing alloy performance.

ACTA MATERIALIA (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Mechanical behavior of high-entropy alloys

Weidong Li et al.

Summary: Research in high-entropy alloys has been booming since the 2010s, focusing on the vast potential in compositions, microstructures, and properties. Efforts are mainly directed towards exploring the compositional space and microstructures, as well as understanding the mechanical behavior. However, there is still a lack of comprehensive studies on the mechanical behavior of high-entropy alloys.

PROGRESS IN MATERIALS SCIENCE (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nitrogen-induced hardening in an austenitic CrFeMnNi high-entropy alloy (HEA)

Mathieu Traversier et al.

Summary: This study investigates the impact of nitrogen on austenitic high-entropy alloy matrixes, showing that nitrogen addition significantly increases hardness and lattice parameter expansion, as well as affecting the mechanical properties due to nitrogen solid solution.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of niobium addition upon microstructure and tensile properties of CrMnFeCoNix high entropy alloys

Sirui Huang et al.

Summary: The Nb-doped CrMnFeCoNix high entropy alloys exhibited changes in microstructure and mechanical properties with varying Ni and Nb content. The addition of Nb increased the volume fraction of Laves phase, leading to improved tensile properties, with the CrMnFeCoNi0.8Nb0.2 alloy showing a significant increase in yield and ultimate tensile strength compared to CrMnFeCoNi0.8 alloy.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Machine learning assisted modelling and design of solid solution hardened high entropy alloys

Xiaoya Huang et al.

Summary: In this study, a machine learning model was used to predict solid solution hardening in High Entropy Alloys (HEAs) by considering critical factors and parameters associated with atomic environment. The model outperformed physical models in predicting hardness. The effects of charge transfer, short range order, and local composition fluctuations on solid solution hardening in HEAs were confirmed through feature engineering, leading to the discovery of non-equiatomic counterparts with significantly higher hardness values.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A perspective on precipitation-hardening high-entropy alloys fabricated by additive manufacturing

Farahnaz Haftlang et al.

Summary: The increasing demand for advanced metallic materials with optimal mechanical properties has led to the development of next-generation materials based on alloying multiple principal elements in high concentrations. High-entropy alloys (HEAs) show great potential for industrial applications due to their exceptional properties under various conditions. Through the use of novel metal additive manufacturing (MAM) techniques, defect-free HEA components with desirable performance can be produced, with unique microstructures providing an optimal strength-ductility relationship even in extreme environments.

MATERIALS & DESIGN (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Mechanical properties of Cantor alloys driven by additional elements: a review

Zhihua Zeng et al.

Summary: The Cantor alloy, known for its excellent ductility and fracture toughness, has the potential to be a high-entropy alloy but is limited by low strength, which can be enhanced by additional elements. This study reviews existing developments to identify additional elements that can improve the mechanical properties of the Cantor alloy, summarizes findings related to its mechanical properties and additional elements, and discusses theoretical strengthening values of various mechanisms. Recommendations are provided for further breakthroughs in improving the mechanical properties of the Cantor alloy by investigating the influence of additional elements on its phase structure.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain Refinement of the CrMnFeCoNi High Entropy Alloy Cast Ingots by Adding Lanthanum

Wei Qu et al.

Summary: The experimental investigation found that adding lanthanum to CrMnFeCoNi high-entropy alloys can significantly refine grains, increase the equiaxed zone faction, and reduce grain size, which is caused by compositional undercooling induced by lanthanum.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modeling solid solution strengthening in high entropy alloys using machine learning

Cheng Wen et al.

Summary: This study developed a relationship characterized by the electronegative difference of elements to represent solid solution strengthening, and proposed a more superior model for predicting the solid solution strength/hardness of high entropy alloys, thereby accelerating the alloy design process.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Ultrasonic induces grain refinement in gas tungsten arc cladding AlCoCrFeNi high-entropy alloy coatings

Qingkai Fan et al.

Summary: Through ultrasonic treatment, the average grain diameter of AlCoCrFeNi HEA coatings is significantly reduced, the microhardness is increased, and the corrosion performance is improved, mainly due to the increased segregation of Cr at grain boundaries.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of a novel medium Mn steel with Cr and Mo microalloying

Chao Wang et al.

Summary: This study investigated the effects of Cr and Mo microalloying on the properties of 0.2C-7Mn steel. It was found that the addition of Cr and Mo can enhance the strength of the steel while maintaining ductility, and also affect the microstructure evolution and austenite stability of the steel.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hierarchically activated deformation mechanisms to form ultra-fine grain microstructure in carbon containing FeMnCoCr twinning induced plasticity high entropy alloy

Mohsen Saboktakin Rizi et al.

Summary: In carbon-containing FeMnCoCr twinning induced plasticity (TWIP) high-entropy alloy (HEA), heterogeneous bimodal structure can be achieved through subdivision of microstructure, continuous dynamic recrystallization, and static recrystallization.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Twinning engineering of high-entropy alloys: An exercise in process optimization and modeling

Jongun Moon et al.

Summary: By utilizing low-temperature pre-straining and subsequent annealing, the mechanical properties of CoCrFeMnNi high-entropy alloy were improved, confirming the effectiveness of twinning engineering concept.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Crystallography

Automatic Identification and Quantitative Characterization of Primary Dendrite Microstructure Based on Machine Learning

Weihao Wan et al.

Summary: A method for automatically detecting dendrite cores and calculating local PDAS in single-crystal superalloys was proposed in this study. By utilizing the Faster R-CNN algorithm and TTA technology, the accuracy reached 98.4% and successfully captured the Gaussian distribution of local PDAS, enabling rapid, accurate, and quantitative characterization of dendritic distribution.

CRYSTALS (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Mechanical properties and fracture mechanism of as-cast MnFeCoCuNix high-entropy alloys

Cheng-yan Zhu et al.

Summary: MnFeCoCuNix high-entropy alloys with different Ni contents were fabricated by vacuum induction melting, showing a dual-phase structure with variations in FCC1 and FCC2 phase composition. With increasing Ni content, segregation of Cu decreases, leading to changes in the phase composition and mechanical properties. The in-situ stretched MnFeCoCuNi0.5 alloy exhibits neck shrinkage during tensile fracture, with surface slip lines showing morphological changes in the dual-phase structure.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Lattice-distortion dependent yield strength in high entropy alloys

Li Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Chemistry, Physical

High-strength ultrafine-grained CoCrFeNiNb high-entropy alloy prepared by mechanical alloying: Properties and strengthening mechanism

Filip Prusa et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tailoring grain growth and solid solution strengthening of single-phase CrCoNi medium-entropy alloys by solute selection

G. W. Hu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Columnar to equiaxed transition and grain refinement of cast CrCoNi medium-entropy alloy by microalloying with titanium and carbon

X. W. Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Chemistry, Physical

Homogenization kinetics of a typical nickel-based superalloy

Mohsen Rafiei et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Review Nanoscience & Nanotechnology

High-entropy alloys

Easo P. George et al.

NATURE REVIEWS MATERIALS (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys

Zezhou Li et al.

PROGRESS IN MATERIALS SCIENCE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain refinement and FCC phase formation in AlCoCrFeNi high entropy alloys by the addition of carbon

Gang Qin et al.

MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

A new concept for growth restriction during solidification

Z. Fan et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mechanical properties and deformation twinning behavior of as-cast CoCrFeMnNi high-entropy alloy at low and high temperatures

Jeoung Han Kim et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

The Role of Carbon in Grain Refinement of Cast CrFeCoNi High-Entropy Alloys

X. W. Liu et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Solidification behavior and Laves phase dissolution during homogenization heat treatment of Inconel 718 superalloy

Mohammad Javad Sohrabi et al.

VACUUM (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Lattice distortion in a strong and ductile refractory high-entropy alloy

Chanho Lee et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Laves-phase formation criterion for high-entropy alloys

N. Yurchenko et al.

MATERIALS SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Evidence for superplasticity in a CoCrFeNiMn high-entropy alloy processed by high-pressure torsion

Hamed Shahmir et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of annealing and thermo-mechanical treatment on the microstructures and mechanical properties of a carbon-doped FeNiMnAl multi-component alloy

Zhangwei Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

High-Entropy Alloys: Interrelations between Electron Concentration, Phase Composition, Lattice Parameter, and Properties

V. F. Gorban' et al.

PHYSICS OF METALS AND METALLOGRAPHY (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Generalized stacking fault energies, ductilities, and twinnabilities of CoCrFeNi-based face-centered cubic high entropy alloys

M. Beyramali Kivy et al.

SCRIPTA MATERIALIA (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

A general formulation for solid solution hardening effect in multicomponent alloys

I. Toda-Caraballo

SCRIPTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cooling rate effect on microstructure and mechanical properties of AlxCoCrFeNi high entropy alloys

Yukun Lv et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0.3CoCrFeNi high entropy alloy

B. Gwalani et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Solute strengthening in random alloys

C. Varvenne et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Chemistry, Physical

Ni tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys

M. Vaidya et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modelling solid solution hardening in high entropy alloys

Isaac Toda-Caraballo et al.

ACTA MATERIALIA (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting

E. Chlebus et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of initial microstructure and thermomechanical processing parameters on microstructures and mechanical properties of ultrafine grained dual phase steels

Yousef Mazaheri et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

Microstructures and properties of high-entropy alloys

Yong Zhang et al.

PROGRESS IN MATERIALS SCIENCE (2014)

添加到收藏夹

Article Multidisciplinary Sciences

A fracture-resistant high-entropy alloy for cryogenic applications

Bernd Gludovatz et al.

SCIENCE (2014)

添加到收藏夹

Article Engineering, Mechanical

Quantification of the effect of transformation-induced geometrically necessary dislocations on the flow-curve modelling of dual-phase steels

A. Ramazani et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure strengthening mechanisms in different equal channel angular pressed aluminum alloys

Marcello Cabibbo

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

The Interdependence Theory: The relationship between grain formation and nucleant selection

D. H. StJohn et al.

ACTA MATERIALIA (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental and numerical study on geometrically necessary dislocations and non-homogeneous mechanical properties of the ferrite phase in dual phase steels

J. Kadkhodapour et al.

ACTA MATERIALIA (2011)

添加到收藏夹

Article Chemistry, Physical

Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy

O. N. Senkov et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Quantitative analysis of homogenization treatment of INCONEL718 superalloy

Miao Zhu-jun et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2011)

添加到收藏夹

Article Materials Science, Composites

Strengthening in Mg-Li matrix composites

Z. Trojanova et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2007)

添加到收藏夹

Article Engineering, Mechanical

Impact of the grain size distribution on the yield stress of heterogeneous materials

S. Berbenni et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Transition of deformation mechanisms and its connection to grain size distribution in nanocrystalline metals

B Zhu et al.

ACTA MATERIALIA (2005)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructural development in equiatomic multicomponent alloys

B Cantor et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

添加到收藏夹

Article Chemistry, Physical

Structure and stability of Laves phases. Part I. Critical assessment of factors controlling Laves phase stability

F Stein et al.

INTERMETALLICS (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes

JW Yeh et al.

ADVANCED ENGINEERING MATERIALS (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.