☆ 4.7 Article

The effect of Ti-based surface layer on AlSi thin film as a high-performance anode for the lithium-ion battery

JOURNAL OF ALLOYS AND COMPOUNDS (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Analytical

Contribution of TiN to the enhanced cycling stability of Si@TiN/C composites as anode materials for Li-ion batteries

Wenli Huang et al.

Summary: Si@TiN/C composites were prepared by solvothermal process, mechanical blending, and subsequent calcination under N-2. The electrochemical properties of the composites were improved with the increasing TiN content, resulting in enhanced cycling stability and high-rate performance. The study is of significance for the design and fabrication of high-performance lithium-ion battery materials.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Applied

Enhanced ion conductivity and electrode-electrolyte interphase stability of porous Si anodes enabled by silicon nitride nanocoating for high-performance Li-ion batteries

Shixiong Mei et al.

Summary: The study reports the use of SiN-coated porous Si as a high-performance anode for lithium-ion batteries. The SiN coating prevents volume expansion and pulverization, and also provides mechanical protection and accelerated ion transport, resulting in high capacity and stable performance.

JOURNAL OF ENERGY CHEMISTRY (2022)

添加到收藏夹

Article Electrochemistry

Double core-shell structure stabilized porous Si@graphene@TiO2 microsphere anode with excellent cyclability and high coulombic efficiency

Zhitong Shang et al.

Summary: In this study, a stable double core-shell structure porous silicon microsphere was successfully synthesized through a graphene-involved electrostatic self-assembly process coupled with a solvent-confined TiO2 monomicelle assembly strategy. The resulting composite exhibited excellent electrochemical performance in lithium-ion batteries.

ELECTROCHIMICA ACTA (2022)

添加到收藏夹

Review Chemistry, Applied

Status and challenges facing representative anode materials for rechargeable lithium batteries

Liqiang Zhang et al.

Summary: This review discusses four representative anode materials for rechargeable lithium batteries, detailing their characteristics and challenges. It also summarizes recent advances, primarily focusing on modification strategies of anode materials and optimization of the electrode/electrolyte interface.

JOURNAL OF ENERGY CHEMISTRY (2022)

添加到收藏夹

Review Chemistry, Physical

Strategies for Controlling or Releasing the Influence Due to the Volume Expansion of Silicon inside Si-C Composite Anode for High-Performance Lithium-Ion Batteries

Xian Zhang et al.

Summary: Silicon is a promising anode material due to its advantages, but its volume expansion causes short cycle life. Silicon/carbon composites can alleviate this issue by forming carbon layers, cavities, and chemical bonds.

MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Double-shell-structured Si@Al2O3@C nanoparticles as high-performance anode materials for lithium-ion batteries

Yuzhe Zhang et al.

Summary: Novel double-shell-structured Si@Al2O3@C nanoparticles were prepared to enhance the electrochemical performance of lithium-ion batteries. The double-shell structure improved the conductivity of the material, stabilized the solid-electrolyte interface film, and released the expansion stress of silicon.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Chemistry, Analytical

Ag decorated porous Si structure as potential high-capacity anode material for Li-ion cells

Matea Raic et al.

Summary: In this study, Ag-decorated honeycomb silicon structure (HCSi) was synthesized by magnesiothermic reduction and investigated as a potential anode material for Li-ion batteries. The results showed that sample HCSi10 with the highest Ag content exhibited the best conductivity and suitable surface area, leading to enhanced electrochemical performance.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Gyrification structure of Si-Al thin film anodes with high-rate performance

Zekui Wu et al.

Summary: Si-Al thin films prepared by RF magnetron sputtering show higher discharge specific capacity and coulombic efficiency under specific conditions. Hydrochloric acid etching method can enhance the capacity and cyclic stability of the film anodes. The formed solid electrolyte interphase layer exhibits a robust structure, adapts to high current density, and provides abundant reaction sites.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Plasma-enhanced chemical vapor deposition for fabrication of yolk-shell SnO2@Void@C nanowires, as an efficient carbon coating technique for improving lithium-ion battery performance

Alireza Habibi et al.

Summary: This manuscript describes the utilization of plasma-enhanced chemical vapor deposition (DC-PECVD) and vapor-liquid-solid (VLS) techniques to fabricate a yolk-shell SnO2@Void@C nanowire (NW) structure. The electrochemical performance of different structures was investigated in half cell Lithium ion battery (LIB) coin cells, and significant enhancement was observed for the SnO2@Void@C electrode due to the stable SEI formation on the carbon-coated layer and the electrolyte interface. The deposited carbon layer provides sufficient space for expanding the SnO2 NWs during the lithiation process, and improves the electrochemical performance of the fabricated anode material.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2022)

添加到收藏夹

Article Chemistry, Physical

Propelling performance of silicon thin film lithium ion battery by appropriate dopants

Yin-Wei Cheng et al.

Summary: This study investigates the effects of boron and arsenic doping on the performance of silicon thin film anode materials in lithium-ion batteries. The results show that boron and arsenic can respectively deteriorate and enhance the capacity retention and rate capabilities of the pristine materials.

NANO ENERGY (2022)

添加到收藏夹

Article Chemistry, Physical

Hollow Si nanospheres with amorphous TiO2 layer used as anode for high-performance Li-ion battery

Xiang-Wei Jiao et al.

Summary: The study introduces a novel nanostructured Si-based material comprised of hollow Si spheres encapsulated in an amorphous TiO2 layer (HN-Si@aTiO(2)). The composite exhibits high capacity performance and enhanced cycling stability, showing great prospects as next-generation lithium-ion anode materials.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Coating ultra-thin TiN layer onto LiNi0.8Co0.1Mn0.1O2 cathode material by atomic layer deposition for high-performance lithium-ion batteries

Yang Liu et al.

Summary: Layered structural LiNixCoyMn1-x-yO2 (NCM, Ni >= 60%) has been studied as a competitive cathode material for high-energy density lithium-ion batteries. In this study, an ultra-thin TiN film was deposited on the surface of LiNi0.8Co0.1Mn0.1O2 (NCM811) particles to improve the electrochemical performance. The TiN coating layer successfully hindered side reactions, inhibited structure damage, reduced contact resistance, and improved electronic conductivity, resulting in significantly improved cycling capacities and rate performance for the NCM811 cathode materials.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Chemistry, Physical

Novel synthesis of porous Si-TiO2 composite as a high-capacity anode material for Li secondary batteries

Youngmo Yang et al.

Summary: This study presents a modified magnesiothermic method to improve the electrochemical properties of porous Si composite materials, offering an alternative option for commercial lithium-ion battery anodes by controlling the porous structure of the composite materials.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Chemistry, Physical

Dramatic improvement enabled by incorporating thermal conductive TiN into Si-based anodes for lithium ion batteries

Jianming Tao et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Review Engineering, Environmental

Recent progress of structural designs of silicon for performance -enhanced lithium -ion batteries

Ying Qi et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Electrochemistry

Scalable 3D porous residual Al-doped Si/SiOx composites for high performance anodes: Coupling effects of porosity, conductive sites and oxide layer

Kai Wang et al.

ELECTROCHIMICA ACTA (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Revisiting the Electrochemical Lithiation Mechanism of Aluminum and the Role of Li-rich Phases (Li1+xAl) on Capacity Fading

Bingsheng Qin et al.

CHEMSUSCHEM (2019)

添加到收藏夹

Article Chemistry, Physical

Neuron like Si-carbon nanotubes composite as a high-rate anode of lithium ion batteries

Guobin Zhu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Electrochemistry

Selective leaching of Al from hypereutectic Al-Si alloy to produce nano-porous silicon (NPS) anodes for lithium ion batteries

Anil D. Pathak et al.

ELECTROCHIMICA ACTA (2019)

添加到收藏夹

Article Electrochemistry

C2H2O4 etching of AlSi alloy Powder:an efficient and mild preparation approach for high performance micro Si anode

Weiyi Cao et al.

ELECTROCHIMICA ACTA (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Designing superior solid electrolyte interfaces on silicon anodes for high-performance lithium-ion batteries

Yaguang Zhang et al.

NANOSCALE (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

30 Years of Lithium-Ion Batteries

Matthew Li et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Materials Science, Ceramics

Tunable structural and electrical impedance properties of ordered and disordered iron oxide phases for capacitive applications

Zaheer H. Shah et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Nanosilicon anodes for high performance rechargeable batteries

Zheng-Long Xu et al.

PROGRESS IN MATERIALS SCIENCE (2017)

添加到收藏夹

Article Chemistry, Physical

Challenges and Recent Progress in the Development of Si Anodes for Lithium-Ion Battery

Yan Jin et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Review Chemistry, Physical

Surface and Interface Engineering of Silicon-Based Anode Materials for Lithium-Ion Batteries

Wei Luo et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Electrochemistry

Understanding the thermal instability of fluoroethylene carbonate in LiPF6-based electrolytes for lithium ion batteries

Koeun Kim et al.

ELECTROCHIMICA ACTA (2017)

添加到收藏夹

Review Nanoscience & Nanotechnology

Si-Based Anode Materials for Li-Ion Batteries: A Mini Review

Delong Ma et al.

NANO-MICRO LETTERS (2014)

添加到收藏夹

Article Electrochemistry

Si-Al thin film anode material with superior cycle performance and rate capability for lithium ion batteries

L. B. Chen et al.

ELECTROCHIMICA ACTA (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.