☆ 4.7 Article

High-entropy alloy nanocrystals with low-angle grain boundary for superb plastic deformability and recoverability

INTERNATIONAL JOURNAL OF PLASTICITY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Nanograin formation and cracking mechanism in Ti alloys under very high cycle fatigue loading

Chengqi Sun et al.

Summary: This paper reveals that nanograins are present in locally high-stress areas during the very high cycle fatigue of TC17 alloy, and nanograin formation is mainly attributed to twinning. The locally high stress induces twinning or slip in preferentially oriented alpha grains. Subsequently, the interaction between twin systems or dislocations leads to the formation of dislocation cells or walls, initiation of microbands, and ultimately the formation of nanograins. As a result, the regions with nanograins and the boundaries between the nanograin and coarse grain regions become preferential sites for crack initiation and early growth. Finite element analysis demonstrates the fatigue cracking behavior related to nanograins.

INTERNATIONAL JOURNAL OF FATIGUE (2023)

添加到收藏夹

Article Chemistry, Physical

Multi-scale investigation of short-range order and dislocation glide in MoNbTi and TaNbTi multi-principal element alloys

Hui Zheng et al.

Summary: In this study, the influence of short-range ordering (SRO) on dislocation glide in MoNbTi and TaNbTi RMPEAs is investigated using a multi-scale modeling approach. The results show that MoNbTi exhibits a higher degree of SRO than TaNbTi, and the local composition directly affects the unstable stacking fault energies (USFEs). Increasing SRO leads to higher mean USFEs and stress required for dislocation glide. Gliding dislocations experience significant hardening due to pinning and depinning caused by random compositional fluctuations, with higher SRO decreasing the degree of USFE dispersion and amount of hardening. Lastly, the applied stress is shown to affect the morphology of an expanding dislocation loop.

NPJ COMPUTATIONAL MATERIALS (2023)

添加到收藏夹

Article Engineering, Mechanical

Enhanced strength-ductility synergy via novel bifunctional nano-precipitates in a high-entropy alloy

Liyuan Liu et al.

Summary: A new Ni-35(CoFe)(55)V5Nb5 high-entropy alloy with a novel bifunctional L-12-Ni3Nb nano-precipitate was developed to enhance the strength and ductility synergy of the alloy, showing high yield strength, ultimate tensile strength, and remarkable elongation. The novel nano-precipitates play a dual role in improving the alloy properties through precipitation strengthening and lowering the stacking fault energy for better work-hardening ability and plasticity.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Engineering, Mechanical

Atomistic interpretation of extra temperature and strain-rate sensitivity of heterogeneous dislocation nucleation in a multi-principal-element alloy

Shi-Cheng Dai et al.

Summary: The incipient plasticity of crystals is influenced by pre-existing crystalline defects, which are formed during materials fabrication and processing and closely related to the mechanical properties. Through atomistic exploration and continuum-level mechanistic modeling, this study investigates the nucleation behavior of heterogeneous dislocations in different materials and reveals the extra thermal softening and strain-rate sensitivity in a multi-principal-element alloy, which can be attributed to the high total entropy and small activation volume of the alloy.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Developing a low-alloyed fine-grained Mg alloy with high strength-ductility based on dislocation evolution and grain boundary segregation

Zhi Zhang et al.

Summary: A new low-alloyed Mg-2Sm-0.8Mn-0.6Ca-0.5Zn alloy is prepared by low-temperature and low-speed extrusion, which exhibits high strength but low ductility. After annealing, the alloy shows both high strength and high ductility due to the effective inhibition of grain growth by grain boundary co-segregation and decreased dislocation density. The evolution of immovable long dislocations towards new grain boundaries is a key factor for the remarkable increase of ductility in the annealed alloy.

SCRIPTA MATERIALIA (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Hierarchical twinning governed by defective twin boundary in metallic materials

Qi Zhu et al.

Summary: This study investigates the intrinsic deformability of defective twin boundaries in metallic materials and finds that inherent kinks on twin boundaries can facilitate the formation of secondary and hierarchical nanotwins. This defect-driven hierarchical twinning propensity is critically dependent on the kink height and is generally applicable in various metals and alloys.

SCIENCE ADVANCES (2022)

添加到收藏夹

Article Engineering, Mechanical

Misorientation-dependent transition between grain boundary migration and sliding in FCC metals

Qishan Huang et al.

Summary: Grain boundaries play a crucial role in the mechanical behaviors of nanocrystalline materials, and their deformation mechanisms are closely related to grain boundary misorientation. In this study, the relationship between grain boundary misorientation and deformation mechanisms was investigated through large-scale molecular dynamic simulations in face-centered cubic metals. An energetic model was developed to predict the critical grain boundary misorientation at which grain boundary sliding surpasses grain boundary migration.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Physics, Applied

Influence of chemistry and structure on interfacial segregation in NbMoTaW with high-throughput atomistic simulations

Ian Geiger et al.

Summary: Refractory multi-principal element alloys with excellent mechanical properties at elevated temperatures have attracted increasing attention. This study investigates the segregation trends and underlying structural and chemical driving factors in the grain boundaries of NbMoTaW alloys using atomistic simulations. The complex interplay between local grain boundary structure and chemical short-range ordering is highlighted, suggesting tunable segregation and chemical ordering by tailoring the grain boundary structure in multi-principal element alloys.

JOURNAL OF APPLIED PHYSICS (2022)

添加到收藏夹

Article Engineering, Mechanical

Shear direction induced transition mechanism from grain boundary migration to sliding in a cylindrical copper bicrystal

Anping Hua et al.

Summary: Studies have found that the change in shear direction can cause a transition from grain boundary migration to sliding in nanocrystalline metals. This transition is caused by the competition between the nucleation energies of disconnection and surface step.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Engineering, Mechanical

Multiscale discrete dislocation dynamics study of gradient nano-grained materials

Songjiang Lu et al.

Summary: This paper investigates the mechanical properties and deformation mechanisms of gradient nano-grained (GNG) aluminum using three-dimensional multiscale discrete dislocation dynamics (DDD). The results show that GNG samples exhibit higher yield stress and strain hardening compared to the rule of mixtures, indicating a synergetic strengthening effect. The study also establishes a theoretical model that successfully describes the Bauschinger effect in GNG and uniform nano-grained (UNG) samples based on the evolution of dislocations during unloading.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Strong yet Ductile High Entropy Alloy Derived Nanostructured Cermet

Jingyang Zhang et al.

Summary: This study successfully synthesized strong and ductile cermet nanosheets through the reaction between high entropy alloy nanocrystals and poly-vinyl alcohol, overcoming the brittleness issue faced by conventional cermets.

NANO LETTERS (2022)

添加到收藏夹

Article Chemistry, Physical

High-Entropy Alloy Nanosheets for Fine-Tuning Hydrogen Evolution

Xianbiao Fu et al.

Summary: This study reports the discovery of a Pt-free combination, PdMoGaInNi, via computer-facilitated screening, which exhibits high HER activity and long-term durability in a proton exchange membrane water electrolyzer. The findings highlight the potential of two-dimensional high-entropy alloy (HEA) nanosheets for hydrogen production.

ACS CATALYSIS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of Cr-substitution on the structural, magnetic, electron transport, and mechanical properties of Fe3-xCrxGe Heusler alloys

Rabin Mahat et al.

Summary: The combined experimental and theoretical studies on the effect of Cr substitution for Fe in Fe3-xCrxGe (0 <= x <= 1) intermetallic alloys show significant changes in structural, magnetic, transport, electronic, and mechanical properties. The increase in Cr content leads to enhanced magnetization and hardness of the alloys. In addition, Cr substitution in Fe3Ge alloys exhibits an affinity towards one of the Fe sites.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Design and Characterization of Self-Lubricating Refractory High Entropy Alloy-Based Multilayered Films

Dawei Luo et al.

Summary: The study demonstrates that NbMoWTa/Ag self-lubricating multilayered films can significantly reduce friction while maintaining high hardness. The film properties are strongly dependent on the individual layer thickness, with the most promising properties obtained when the interface structure transforms into a coherent one. This work may open a new route for developing innovative self-lubricating RHEA films with excellent tribological properties.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Lattice distortion as an estimator of solid solution strengthening in high-entropy alloys

Ankit Roy et al.

Summary: Research has shown that increasing the number of elements in high-entropy alloys does not necessarily improve their structural properties, with low- and medium-entropy alloys sometimes exhibiting superior hardness and Young's modulus. The predominant strengthening mechanisms in multicomponent alloys are intrinsic lattice distortion and cohesive energies derived from mixing multiple atom types.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Stability of nanocrystalline metals: The role of grain-boundary chemistry and structure

Christopher A. Schuh et al.

Summary: Two major strategies, grain-boundary alloying and achieving low-energy crystallographic grain-boundary structures, have led to effective and implementable stable nanocrystalline materials, pointing to many directions for future advancements in the field.

MRS BULLETIN (2021)

添加到收藏夹

Article Engineering, Mechanical

Multi-heterostructure and mechanical properties of N-doped FeMnCoCr high entropy alloy

Zhufeng He et al.

Summary: This study presents a novel strategy of heavy nitrogen-doping in a low-cost metastable FeMnCoCr HEA to produce ultrastrong, tough, and low-cost HEAs. By simple thermomechanical processing, a multiheterostructure was formed, leading to a significant increase in yield strength and uniform elongation of the material. The high-nitrogen duplex alloy design strategy developed here provides a new paradigm for developing high-performance fcc HEAs.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Inclination-governed deformation of dislocation-type grain boundaries

Qi Zhu et al.

Summary: This study reveals the fundamental influences of GB inclination on the deformation of curved dislocation-type GBs in face-centered cubic metals through in situ TEM nanomechanical testing and atomistic simulation. A inclination-governed GB model is established to predict the deformation behaviors of curved GBs, shedding light on the GB-mediated plasticity and the structural design of metallic materials.

JOURNAL OF MATERIALS RESEARCH (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Unraveling dual phase transformations in a CrCoNi medium-entropy alloy

Yujie Chen et al.

Summary: The emergence of multi-principal element alloys (MPEAs) brings great promise for high performance metallic materials. This study reports a new deformation mechanism of mechanically-induced dual phase transformations in the CrCoNi medium-entropy alloy, showing the potential for enhancing the mechanical properties of advanced alloys.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Columnar grain-driven plasticity and cracking in nanotwinned FCC metals

Qiongjiali Fang et al.

Summary: This study investigates the effects of grain boundary (GB) strain accommodation on plastic deformation in columnar-grained nanocrystalline nanotwinned (nt) face-centered cubic metals. The research findings show that CTB strengthening effects are increasingly more pronounced in columnar-grained nt metals as their shear modulus increases.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Gradient cell-structured high-entropy alloy with exceptional strength and ductility

Qingsong Pan et al.

Summary: By introducing gradient nanoscaled dislocation cell structures in stable single-phase HEAs, enhanced strength can be achieved without apparent loss of ductility. The gradient structure induces the formation of high-density tiny stacking faults and twins, contributing to improved plasticity, increased strength, and work hardening.

SCIENCE (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Atomistic simulations of dislocation mobility in refractory high-entropy alloys and the effect of chemical short-range order

Sheng Yin et al.

Summary: The presence of short-range order influences the mobility of dislocations in high-entropy alloys, with edge dislocations being enhanced and double-kink nucleation in screw dislocations being reduced. A cross-slip locking mechanism is observed for the motion of screws, providing extra strengthening for refractory high-entropy alloy system.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nanometer-Thick High-Entropy Alloy Nitride Al0.4Hf0.6NbTaTiZrN-Based Solar Selective Absorber Coatings

Shuai-Sheng Zhao et al.

Summary: A highly efficient solar selective absorber coating has been successfully developed, with high solar absorptance and low emittance, maintaining a high solar-thermal conversion efficiency at high temperatures. Comprehensive studies on optical properties, microstructure, element distribution, and failure mechanism provide important insights for the application of this coating in solar energy harvesting.

ACS APPLIED NANO MATERIALS (2021)

添加到收藏夹

Article Engineering, Mechanical

Mechanism of grain boundary serration during hot deformation of AZ31 alloy: Role of grain boundary dislocations and grain boundary sliding

Hyeon-Woo Son et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

The Hall-Petch and inverse Hall-Petch relations and the hardness of nanocrystalline metals

Sneha N. Naik et al.

JOURNAL OF MATERIALS SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain boundary structure and mobility in high-entropy alloys: A comparative molecular dynamics study on a Σ11 symmetrical tilt grain boundary in face-centered cubic CuNiCoFe

Daniel Utt et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain boundary structure in high-entropy alloys

Diana Farkas

JOURNAL OF MATERIALS SCIENCE (2020)

添加到收藏夹

Article Engineering, Mechanical

The effect of microstructure on the relationship between grain boundary sliding and slip transmission in high purity aluminum

Marissa A. Linne et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Lattice distortion effect on incipient behavior of Ti-based multi-principal element alloys

Xiangkai Zhang et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of lattice distortion and chemical short-range order on the mechanisms of deformation in medium entropy alloy CoCrNi

Wu-Rong Jian et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Metallic nanocrystals with low angle grain boundary for controllable plastic reversibility

Qi Zhu et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Model interatomic potentials for Fe-Ni-Cr-Co-Al high-entropy alloys

Diana Farkas et al.

JOURNAL OF MATERIALS RESEARCH (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Compositional complexity dependence of dislocation density and mechanical properties in high entropy alloy systems

P. Thirathipviwat et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Ductility and strain hardening in gradient and lamellar structured materials

Xiaolei Wu et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Engineering, Mechanical

Dislocation mechanism based size-dependent crystal plasticity modeling and simulation of gradient nano-grained copper

Xiaochong Lu et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Radiation stability of nanocrystalline single-phase multicomponent alloys

Emil Levo et al.

JOURNAL OF MATERIALS RESEARCH (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

A simplified model connecting lattice distortion with friction stress of Nb-based equiatomic high-entropy alloys

Y. Y. Zhao et al.

MATERIALS RESEARCH LETTERS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of elemental combination on friction stress and Hall-Petch relationship in face-centered cubic high / medium entropy alloys

Shuhei Yoshida et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Segregation-driven grain boundary spinodal decomposition as a pathway for phase nucleation in a high-entropy alloy

Linlin Li et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Engineering, Mechanical

Simultaneously enhancing strength and ductility of a high-entropy alloy via gradient hierarchical microstructures

M. N. Hasan et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Low-angle grain boundary structures and size effects of nickel nanolaminated structures

Yongshuai Yuan et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Highly efficient decomposition of ammonia using high-entropy alloy catalysts

Pengfei Xie et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Transformation induced softening and plasticity in high entropy alloys

Jia Li et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Chemistry, Physical

Ultrahigh hardness and high electrical resistivity in nano-twinned, nanocrystalline high-entropy alloy films

Wenyi Huo et al.

APPLIED SURFACE SCIENCE (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Development and exploration of refractory high entropy alloys-A review

Oleg N. Senkov et al.

JOURNAL OF MATERIALS RESEARCH (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of lattice distortion on solid solution strengthening of BCC high-entropy alloys

Zhipeng Wang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)

添加到收藏夹

Article Chemistry, Physical

Understanding the physical metallurgy of the CoCrFeMnNi high-entropy alloy: an atomistic simulation study

Won-Mi Choi et al.

NPJ COMPUTATIONAL MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Model interatomic potentials and lattice strain in a high-entropy alloy

Diana Farkas et al.

JOURNAL OF MATERIALS RESEARCH (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Extra strengthening and work hardening in gradient nanotwinned metals

Zhao Cheng et al.

SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Correlation between lattice distortion and friction stress in Ni-based equiatomic alloys

Y. Y. Zhao et al.

INTERMETALLICS (2017)

添加到收藏夹

Article Engineering, Mechanical

Uniaxial stress-driven grain boundary migration in Hexagonal Close-packed (HCP) metals: Theory and MD simulations

S. Tang et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

添加到收藏夹

Article Engineering, Mechanical

Effects of solutes on dislocation nucleation from grain boundaries

Valery Borovikov et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

添加到收藏夹

Article Engineering, Mechanical

On strain hardening mechanism in gradient nanostructures

Jianjun Li et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

添加到收藏夹

Article Physics, Applied

Local segregation versus irradiation effects in high-entropy alloys: Steady-state conditions in a driven system

Leonie Koch et al.

JOURNAL OF APPLIED PHYSICS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Atomistic study of hydrogen embrittlement of grain boundaries in nickel: I. Fracture

A. Tehranchi et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

A critical review of high entropy alloys and related concepts

D. B. Miracle et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Review Nanoscience & Nanotechnology

A new approach to grain boundary engineering for nanocrystalline materials

Shigeaki Kobayashi et al.

BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Average-atom interatomic potential for random alloys

Celine Varvenne et al.

PHYSICAL REVIEW B (2016)

添加到收藏夹

Article Chemistry, Physical

Empirical design of single phase high-entropy alloys with high hardness

Fuyang Tian et al.

INTERMETALLICS (2015)

添加到收藏夹

Article Chemistry, Physical

In situ atomic-scale observation of twinning-dominated deformation in nanoscale body-centred cubic tungsten

Jiangwei Wang et al.

NATURE MATERIALS (2015)

添加到收藏夹

Review Chemistry, Multidisciplinary

Preparation and catalytic applications of nanomaterials: a review

Navneet Sharma et al.

RSC ADVANCES (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

The roles of grain boundary dislocations and disclinations in the nucleation of {10(1)over-bar12} twinning

Christopher D. Barrett et al.

ACTA MATERIALIA (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

Grain boundary segregation engineering in metallic alloys: A pathway to the design of interfaces

D. Raabe et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2014)

添加到收藏夹

Article Chemistry, Physical

Ab initio design of elastically isotropic TiZrNbMoVx high-entropy alloys

Fuyang Tian et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

The influence of Cr content on the mechanical properties of ODS ferritic steels

Shaofu Li et al.

JOURNAL OF NUCLEAR MATERIALS (2014)

添加到收藏夹

Article Multidisciplinary Sciences

Grain rotation mediated by grain boundary dislocations in nanocrystalline platinum

Lihua Wang et al.

NATURE COMMUNICATIONS (2014)

添加到收藏夹

Article Multidisciplinary Sciences

Reversible cyclic deformation mechanism of gold nanowires by twinning-detwinning transition evidenced from in situ TEM

Subin Lee et al.

NATURE COMMUNICATIONS (2014)

添加到收藏夹

Review Chemistry, Physical

Advanced Ceramics from Preceramic Polymers Modified at the Nano-Scale: A Review

Enrico Bernardo et al.

MATERIALS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys

K. -Y. Tsai et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Grain growth and the Hall-Petch relationship in a high-entropy FeCrNiCoMn alloy

W. H. Liu et al.

SCRIPTA MATERIALIA (2013)

添加到收藏夹

Article Multidisciplinary Sciences

In situ atomic-scale observation of continuous and reversible lattice deformation beyond the elastic limit

Lihua Wang et al.

NATURE COMMUNICATIONS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Structure identification methods for atomistic simulations of crystalline materials

Alexander Stukowski

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2012)

添加到收藏夹

Article Multidisciplinary Sciences

Dislocation nucleation governed softening and maximum strength in nano-twinned metals

Xiaoyan Li et al.

NATURE (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

The influence of Cr content on the microstructure and mechanical properties of AlSi9Cu3(Fe) die-casting alloys

Giulio Timelli et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Anomalous decrease in X-ray diffraction intensities of Cu-Ni-Al-Co-Cr-Fe-Si alloy systems with multi-principal elements

Jien-Wei Yeh et al.

MATERIALS CHEMISTRY AND PHYSICS (2007)

添加到收藏夹

Article Chemistry, Physical

On fitting a gold embedded atom method potential using the force matching method

G Grochola et al.

JOURNAL OF CHEMICAL PHYSICS (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

Misfit-energy-increasing dislocations in vapor-deposited CoFe/NiFe multilayers

XW Zhou et al.

PHYSICAL REVIEW B (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Formation of simple crystal structures in Cu-Co-Ni-Cr-Al-Fe-Ti-V alloys with multiprincipal metallic elements

JW Yeh et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.