Tension-compression asymmetry of metastable austenitic stainless steel studied by in-situ high-energy X-ray diffraction

This work studies the tension-compression asymmetry (TCA) of metastable austenitic stainless steel (MASS) in uniaxial loading depending on temperature. In-situ high-energy X-ray diffraction was used to simultaneously probe phase fractions, transformation kinetics, crystallographic texture, lattice strains, strain and stress partitioning between austenite and martensites during quasi-static tensile and compressive deformation at 24, 60 and 100 degrees C. Complementary relaxed -constraint crystal plasticity simulations and calculations of the mechanical driving force related to the formation of alpha' and e martensites were performed. At 24 degrees C, martensitic transformations (MTs) prevail, while at 100 degrees C dislocation slip is the dominant deformation mechanism for both load senses. Macroscopic stress-strain response and transformation behaviour exhibit TCA, with compression promoting the conversion of e into alpha'. Transformation kinetics were analyzed in relation to shear banding and the geometric alignment of e lamellas depending on load sense and temperature. A strong TCA was found for crystallographic texture, bearing signatures of grain rotation due to plastic slip and of MT in case of austenite (gamma). For both load senses, the relative strengths of austenite and martensite texture fibres were related to the driving force anisotropy for alpha' formation calculated based on the phenomenological theory of martensite crystallography. Texture evolution of alpha' is largely controlled by the MT itself, not by grain rotation. Analysis of differently orientated austenite grain families revealed a pronounced TCA of the lattice strains, linked to the gamma -> e MT. This was found to be a direct consequence of driving force and volume change related to e formation. Furthermore, stress is shared differently between austenite and martensites in tension vs. in compression. gamma hardens more and hence carries a larger portion of the total stress in compression than in tension. The origin for this TCA could be found in the elasto-plastic accommodation of the volume change related to alpha' formation. These findings can aid the development of new material laws for MASSs that are sensitive to load-sense and temperature for advanced forming simulations.

Automated summary

This work investigates the tension-compression asymmetry (TCA) in metastable austenitic stainless steel (MASS) under uniaxial loading at different temperatures. The study reveals that martensitic transformations and dislocation slip are the dominant deformation mechanisms at 24℃ and 100℃, respectively. The TCA is influenced by grain rotation and driving force anisotropy for alpha' formation. Furthermore, the lattice strains show pronounced tension-compression asymmetry due to the volume change related to alpha' formation. The stress partitioning between austenite and martensites also differs in tension and compression.