相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Rapid amorphization of CrMnFeCoNi high-entropy alloy under ultrasonic vibrations
Caitao Fan et al.
MATERIALS & DESIGN (2023)
Shear localization in polycrystalline metal at high-strain rates with dynREamic recrystallization: Crystal plasticity modeling and texture effect
Wen An et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2023)
Adiabatic shear localization induced by dynamic recrystallization in an FCC high entropy alloy
Kun Jiang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2023)
Effect of temperature and strain rate on quasi-static and dynamic compressive behavior of forged CrMnFeCoNi high entropy alloy
Jie Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)
Quantitative investigation on deformation mechanism and dynamic recrystallization during localized adiabatic shearing of single crystal copper
Jianlin He et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)
Shear deformation of pure-Cu and Cu/Nb nano-laminates using micromechanical testing
Tanvi Ajantiwalay et al.
SCRIPTA MATERIALIA (2023)
New insights into the role of porous microstructure on dynamic shear localization
A. R. Vishnu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2022)
Dynamic deformation behavior of a FeCrNi medium entropy alloy
Ao Fu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)
1.45 GPa ultrastrong cryogenic strength with superior impact toughness in the in-situ nano oxide reinforced CrMnFeCoNi high-entropy alloy matrix nanocomposite manufactured by laser powder b e d fusion
Young-Kyun Kim et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)
Forced shear deformation behaviors of annealed pure titanium under quasi-static and dynamic loading
Zhicheng Zhu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Pure mode II dynamic fracture characteristics and failure mechanism of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass
Yang Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
The effects of irradiation on CrMnFeCoNi high-entropy alloy and its derivatives
Zhouran Zhang et al.
PROGRESS IN MATERIALS SCIENCE (2022)
Revealing the deformation mechanisms of the heterogeneous structured CrMnFeCoNi high entropy alloy with ameliorated mechanical and corrosion resistance properties
Yun Zou et al.
SURFACE & COATINGS TECHNOLOGY (2022)
High temperature tensile properties of as-cast and forged CrMnFeCoNi high entropy alloy
Jie Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Mechanical behavior of high-entropy alloys
Weidong Li et al.
PROGRESS IN MATERIALS SCIENCE (2021)
Dynamic behavior of CrMnFeCoNi high-entropy alloy in impact tension
Yu Qiao et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2021)
Improved mechanical and corrosion properties of CrMnFeCoNi high entropy alloy with cold rolling and post deformation annealing process
Yun Zou et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
The modified GTN-Thomason criterion for modelling of ductile fracture considering shear factor and size effect in micro-scaled plastic deformation
W. T. Li et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Microstructure, texture, and fracture of pure magnesium adiabatic shear band under high strain rate compression
Shiyuan Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Amorphization in extreme deformation of the CrMnFeCoNi high-entropy alloy
Shiteng Zhao et al.
SCIENCE ADVANCES (2021)
Simultaneous enhancement of strength and ductility in a NiCoCrFe high-entropy alloy upon dynamic tension: Micromechanism and constitutive modeling
T. W. Zhang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Quasi-static and dynamic response, and texture evolution of two overaged Al 7056 alloy plates in T761 and T721 tempers: Experiments and modeling
Angela Y. Ku et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Dynamic failure of titanium: Temperature rise and adiabatic shear band formation
Yazhou Guo et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)
Shear deformation behavior of Zircaloy-4 alloy plate
Fusen Yuan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Planar slip-driven fatigue crack initiation and propagation in an equiatomic CrMnFeCoNi high-entropy alloy
Kai Suzuki et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Micro-compression studies of face-centered cubic and body-centered cubic high-entropy alloys: Size-dependent strength, strain rate sensitivity, and activation volumes
Yuan Xiao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Microstructural characteristics and formation mechanism of adiabatic shear bands in Al-Zn-Mg-Cu alloy under dynamic shear loading
Weiliang Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Strain rate dependent shear localization and deformation mechanisms in the CrMnFeCoNi high-entropy alloy with various microstructures
Zhengling Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Discovery and design of fatigue-resistant high-entropy alloys
Weidong Li et al.
SCRIPTA MATERIALIA (2020)
Simultaneous twinning and microband formation under dynamic compression in a high entropy alloy with a complex energetic landscape
D. L. Foley et al.
ACTA MATERIALIA (2020)
Strain localization and dynamic recrystallization in polycrystalline metals: Thermodynamic theory and simulation framework
Charles K. C. Lieou et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Effect of impurities on adiabatic shear bands (ASB) formation and evolution in U-2.5 wt%Nb alloy under impact
Dawu Xiao et al.
JOURNAL OF NUCLEAR MATERIALS (2019)
Simultaneously enhancing strength and ductility of a high-entropy alloy via gradient hierarchical microstructures
M. N. Hasan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Study on the microstructural characteristics of adiabatic shear band in solid-solution treated ZK60 magnesium alloy
Yang Yang et al.
MATERIALS CHARACTERIZATION (2019)
Temperature Rise Associated with Adiabatic Shear Band: Causality Clarified
Yazhou Guo et al.
PHYSICAL REVIEW LETTERS (2019)
Adiabatic shear localization in the CrMnFeCoNi high-entropy alloy
Zezhou Li et al.
ACTA MATERIALIA (2018)
Dynamic shear deformation of a CrCoNi medium-entropy alloy with heterogeneous grain structures
Yan Ma et al.
ACTA MATERIALIA (2018)
Mechanical and microstructural properties of 2024-T351 aluminium using a hat-shaped specimen at high strain rates
Nathan J. Edwards et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
High-strain-rate plastic deformation and fracture behaviour of Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy at room temperature
Chun Ran et al.
MECHANICS OF MATERIALS (2018)
Dynamic deformation behavior of a face-centered cubic FeCoNiCrMn high-entropy alloy
Junyang He et al.
SCIENCE BULLETIN (2018)
Dynamic recrystallization in adiabatic shear banding: Effective-temperature model and comparison to experiments in ultrafine-grained titanium
Charles K. C. Lieou et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Shear localization and recrystallization in high strain rate deformation in Ti-5Al-5Mo-5V-1Cr-1Fe alloy
Chun Ran et al.
MATERIALS LETTERS (2018)
A review on split Hopkinson bar experiments on the dynamic characterisation of concrete
Mohammad Reza Khosravani et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
The dependence of the Taylor-Quinney coefficient on the dynamic loading mode
D. Rittel et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2017)
Dynamic shear deformation and failure of Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy
Chun Ran et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
High-velocity deformation of Al0.3CoCrFeNi high-entropy alloy: Remarkable resistance to shear failure
Z. Li et al.
SCIENTIFIC REPORTS (2017)
Spherical nanoindentation creep behavior of nanocrystalline and coarse-grained CoCrFeMnNi high-entropy alloys
Dong-Hyun Lee et al.
ACTA MATERIALIA (2016)
A deformation mechanism based crystal plasticity model of ultrafine-grained/nanocrystalline FCC polycrystals
Akhtar S. Khan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Plastic deformation behavior of a thermo-mechanically processed AZ31 magnesium alloy under a wide range of temperature and strain rate
Farhoud Kabirian et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Shock compression response of high entropy alloys
Z. J. Jiang et al.
MATERIALS RESEARCH LETTERS (2016)
Mechanical responses and deformation mechanisms of an AZ31 Mg alloy sheet under dynamic and simple shear deformations
Amit Pandey et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Strain rate effect of high purity aluminum single crystals: Experiments and simulations
Akhtar S. Khan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Adiabatic shear localization in pure titanium deformed by dynamic loading: Microstructure and microtexture characteristic
Yanghui Jiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
High entropy alloys
H. K. D. H. Bhadeshia
MATERIALS SCIENCE AND TECHNOLOGY (2015)
Adiabatic Shear Banding and Cracking Phenomena Occurring During Cold-Forging Simulation Tests of Plain Carbon Steel Wire Rods by Using a Split Hopkinson's Pressure Bar
Minju Kang et al.
METALS AND MATERIALS INTERNATIONAL (2015)
Effect of microstructure on the nucleation and initiation of adiabatic shear bands (ASBs) during impact
Solomon Boakye Yiadom et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Measurement of stored energy in Fe-48%Ni alloys strongly cold-rolled using three approaches: Neutron diffraction, Dillamore and KAM approaches
Yanick Ateba Betanda et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
A fracture-resistant high-entropy alloy for cryogenic applications
Bernd Gludovatz et al.
SCIENCE (2014)
Molecular dynamics study of the α-γ phase transition in Fe induced by shear deformation
Binjun Wang et al.
ACTA MATERIALIA (2013)
Microstructural examination of quasi-static and dynamic shear in high-purity iron
E. K. Cerreta et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Modeling periodic adiabatic shear band evolution during high speed machining Ti-6Al-4V alloy
G. G. Ye et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Experimental and numerical investigations of yield surface, texture, and deformation mechanisms in AA5754 over low to high temperatures and strain rates
Amit Pandey et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Formation condition of solid solution type high-entropy alloy
Ming-xing Ren et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)
Thermo-mechanical aspects of adiabatic shear failure of AM50 and Ti6Al4V alloys
D. Rittel et al.
MECHANICS OF MATERIALS (2008)
Dynamic Recrystallization as a Potential Cause for Adiabatic Shear Failure
D. Rittel et al.
PHYSICAL REVIEW LETTERS (2008)
Adiabatic shear failure and dynamic stored energy of cold work
D Rittel et al.
PHYSICAL REVIEW LETTERS (2006)
Microstructural development in equiatomic multicomponent alloys
B Cantor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Adiabatic shear banding in high speed machining of Ti-6Al-4V: experiments and modeling
A Molinari et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2002)