☆ 4.7 Article

Inception of macroscopic shear bands during hot working of aluminum alloys

INTERNATIONAL JOURNAL OF PLASTICITY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Effect of loading path on grain misorientation and geometrically necessary dislocation density in polycrystalline aluminum under reciprocating shear

Wenkai Fu et al.

Summary: Through the study of crystal plasticity theory, it was found that in solid phase processing, regions with high misorientation and GND density first appear near grain boundaries and extend towards interior grains. The loading path affects plastic deformation accumulation and recovery, and thus affects dislocation evolution and misorientation.

COMPUTATIONAL MATERIALS SCIENCE (2022)

添加到收藏夹

Article Engineering, Mechanical

Dynamic strain ageing in an AlMg alloy at different strain rates and temperatures: Experiments and constitutive modelling

Jianbin Xu et al.

Summary: Uniaxial tension tests were conducted on an AA5182-O sheet at different strain rates and temperatures to investigate the dynamic strain ageing. A modified constitutive model based on the mechanical threshold stress (MTS) framework was proposed and used to analyze the stress-strain response. The model successfully captured the dependence of strain rate sensitivity on strain, temperature, and strain rate, and provided a re-interpretation of the occurrence of stress serrations.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanistic Origin of Orientation-Dependent Substructure Evolution in Aluminum and Aluminum-Magnesium Alloys

Aditya Prakash et al.

Summary: This study experimentally investigated the role of magnesium (Mg) solute and deformation temperature on the orientation-dependent substructure evolution in aluminum (Al). The results showed that increased Mg-content led to the conversion of dislocation cell structures to dislocation tangles, while increased deformation temperature nullified the role of solute and made the substructures orientation independent. Numerical simulations further explored the mechanistic origin of the orientation dependence and revealed that the density of dynamic obstacles and sources determined the orientation dependence of substructure evolution.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2022)

添加到收藏夹

Article Engineering, Mechanical

Study of grain boundary orientation gradients through combined experiments and strain gradient crystal plasticity modeling

Namit Pai et al.

Summary: A combined experimental and strain gradient crystal plasticity framework is proposed to study the development of orientation and misorientation gradients at grain boundaries during plastic deformation. The presence of localized plastic deformation in the vicinity of grain boundaries, referred to as Near Boundary Gradient Zones (NBGZs), is observed through experimental and simulated results. The simulation results show that the Geometrically Necessary Dislocation (GND) density is correlated with local misorientation, while the Statistically Stored Dislocation (SSD) density is correlated with the effective plastic strain in NBGZs. Furthermore, a correlation between the length of NBGZs and grain size is also suggested by the results.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Engineering, Mechanical

Prominent role of multi-scale microstructural heterogeneities on superplastic deformation of a high solid solution Al-7Mg alloy

Min Zha et al.

Summary: This paper focuses on the superplastic response of a high solid solution Al-7Mg alloy processed by equal-channel angular pressing (ECAP) under uniaxial tension. The study reveals that the evolution of microstructural heterogeneities can be regulated to favor superplastic deformation, achieving impressive elongation of approximately 523%. The high superplasticity is attributed to the cooperated mechanism of dislocation slip accommodated by continuous dynamic recrystallization (CDRX) and grain boundary sliding (GBS) during deformation.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Slip band formation in low and high solute aluminum: a combined experimental and modeling study

Aditya Prakash et al.

Summary: Deformed microstructures with slip band formation were observed in commercial AA1050 and AA2219. Higher deformation temperatures increased A, decreased Z, and reduced γ(S)(LT). AA1050 had smaller λ and higher Z, while AA2219 showed higher γ(S)(LT), with finer λ grains exhibiting larger ingrain misorientations in AA1050.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Measurement of hardness and elastic modulus by load and depth sensing indentation: Improvements to the technique based on continuous stiffness measurement

P. Sudharshan Phani et al.

Summary: The method for measuring hardness and elastic modulus of small volumes of material through instrumented indentation was initially developed by Oliver and Pharr in their early works. This has led to advancements in the field of small scale nanomechanical testing, with improvements in measurement electronics allowing testing under a wider range of conditions. The article provides an updated overview of factors affecting precision and accuracy of nanoindentation test results, focusing on the continuous stiffness measurement technique (CSM) and presenting a step-by-step procedure for conducting CSM based tests, along with calibration procedures for optimal precision and accuracy. Additionally, an assessment and comparison of different testing procedures is presented.

JOURNAL OF MATERIALS RESEARCH (2021)

添加到收藏夹

Article Engineering, Mechanical

Incipient dynamic recrystallization and adiabatic shear bands in Ti?7Al studied via in situ X-ray diffraction

D. J. Magagnosc et al.

Summary: The study reported the first in situ X-ray diffraction observations of DRX, revealing that DRX initiation is driven by accumulation of plastic strain rather than temperature rise. The results showed a continuous evolution of microstructure with increasing plastic strain, until reaching maximum stress.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

添加到收藏夹

Article Engineering, Mechanical

A persistent modal plastic model for instabilities in Al-Mg alloys with 1D application

Baptiste Reyne et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Critical examination of experimental data on strain bursts (pop-in) during spherical indentation

Pardhasaradhi Sudharshan Phani et al.

JOURNAL OF MATERIALS RESEARCH (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dynamic failure of titanium: Temperature rise and adiabatic shear band formation

Yazhou Guo et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

A statistical study of the relationship between plastic strain and lattice misorientation on the surface of a deformed Ni-based superalloy

A. Harte et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Engineering, Mechanical

The role of crystallographic orientations on heterogeneous deformation in a zirconium alloy: A combined experimental and modeling study

Khushahal Thool et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

添加到收藏夹

Article Engineering, Mechanical

In situ investigation of strain heterogeneity and microstructural shear bands in rolled Magnesium AZ31

I. Bugra Ucel et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

A critical assessment of the effect of indentation spacing on the measurement of hardness and modulus using instrumented indentation testing

P. Sudharshan Phani et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural Origin of Residual Stress Relief in Aluminum

Arijit Lodh et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)

添加到收藏夹

Article Physics, Multidisciplinary

Temperature Rise Associated with Adiabatic Shear Band: Causality Clarified

Yazhou Guo et al.

PHYSICAL REVIEW LETTERS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

The Formation and Evolution of Shear Bands in Plane Strain Compressed Nickel-Base Superalloy

Bin Tang et al.

METALS (2018)

添加到收藏夹

Article Engineering, Mechanical

Effect of microstructure on continuous propagation of the Portevin-Le Chatelier deformation bands

D. Yuzbekova et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Relating Residual Stress and Substructural Evolution During Tensile Deformation of an Aluminum-Manganese Alloy

Arijit Lodh et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Temperature dependence of work hardening in sparsely twinning zirconium

Jaiveer Singh et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Automation & Control Systems

Forming limit curves in low-carbon steels: improved prediction by incorporating microstructural evolution

B. H. Vadavadagi et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mechanism of macroscopic shear band formation in plane strain compressed fine-grained aluminium

H. Paul et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

添加到收藏夹

Article Engineering, Mechanical

Multiscale deformation heterogeneity in twinning magnesium investigated with in situ image correlation

C. Can Aydiner et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Orientation dependence of shear banding in face-centered-cubic single crystals

N. Jia et al.

ACTA MATERIALIA (2012)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Orientation Dependent Recovery in Interstitial Free Steel

Rajesh Khatirkar et al.

ISIJ INTERNATIONAL (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hot deformation behavior of hot extruded Al-6Mg alloy

M. A. Mostafaei et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Indentation Schmid factor and orientation dependence of nanoindentation pop-in behavior of NiAl single crystals

T. L. Li et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strain Mode Dependence of Deformation Texture Developments: Microstructural Origin

S. Raveendra et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)

添加到收藏夹

Article Engineering, Mechanical

Multiscale strain measurements of plastically deforming polycrystalline titanium: Role of deformation heterogeneities

C. Efstathiou et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2010)

添加到收藏夹

Article Engineering, Mechanical

A binary-tree based model for rate-independent polycrystals

Sivasambu Mahesh

INTERNATIONAL JOURNAL OF PLASTICITY (2010)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Initiation of dynamic recrystallization in constant strain rate hot deformation

EI Poliak et al.

ISIJ INTERNATIONAL (2003)

添加到收藏夹

Article Engineering, Industrial

The effect of temperature on strain-rate sensitivity in high strength Al-Mg alloy sheet

E Romhanji et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

Micromechanical and macromechanical effects in grain scale polycrystal plasticity experimentation and simulation

D Raabe et al.

ACTA MATERIALIA (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

Overview -: Residual stress part 1 -: Measurement techniques

PJ Withers et al.

MATERIALS SCIENCE AND TECHNOLOGY (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.