☆ 4.7 Article

Geometrical and microstructural size effects in progressive forming using wires

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

An improved springback model considering the transverse stress in microforming

Zhutian Xu et al.

Summary: In order to satisfy the higher accuracy requirement in microforming of thin-walled structures, accurately predicting and controlling springback behavior is necessary. However, conventional springback models for macroforming are not valid for microforming due to the smaller feature size. This study explored the applicability of a springback model for conventional stretch-bending and developed an improved model for microforming of parallel channels based on the effects of transverse stress and non-uniform stretching. The results showed that the improved model provided better estimation of the shift distance of the neutral plane and agreed well with experimental data.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

添加到收藏夹

Article Engineering, Mechanical

Size effect on the cyclic deformation behavior of superalloy ultrathin sheet: Characterization and multiscale modelling

Weilin He et al.

Summary: Superalloy ultrathin sheets have various excellent mechanical properties and occupy a significant proportion in aeroengines. However, their forming and springback laws are not clear, and the existing models cannot accurately predict their deformation and springback. In this study, cyclic shearing tests were conducted to explore the size effect on the mechanical response of superalloy ultrathin sheets, and a new multiscale cyclic hardening model was proposed. The proposed model accurately describes the cyclic deformation behavior and springback of superalloy ultrathin sheets affected by size effect.

INTERNATIONAL JOURNAL OF PLASTICITY (2023)

添加到收藏夹

Article Engineering, Manufacturing

Modification of the surface layer model and establishment of the surface layer thickness model of pure copper

Jiqiang Zhai et al.

Summary: The size effect of flow stress is an important factor in the deformation behavior of materials in microforming. The traditional surface layer model explains the decrease in flow stress with decreasing specimen size at sub-millimeter and micron scales, but it has inconsistencies with reality. To more accurately describe the deformation behavior at the microscale, a modified surface layer model is proposed based on experiments and plastic forming theory, considering the region where the flow stress is lower than that of the internal polycrystalline as the surface layer. The surface-layer-thickness model based on grain size is also proposed and validated with micro upsetting experiments on T2 copper.

JOURNAL OF MANUFACTURING PROCESSES (2023)

添加到收藏夹

Review Engineering, Manufacturing

Review of additive electrochemical micro-manufacturing technology

Xinchao Li et al.

Summary: Additive electrochemical micro-manufacturing (micro-AECM) is a nontraditional fabrication method that uses electrochemical deposition to manufacture metal-based microstructures layer by layer. It has the advantages of accurate geometric replication, void-free and crack-free microstructures, and is a true additive manufacturing technology. Several micro-AECM techniques have been developed and commercially implemented. This paper introduces the fundamental schematic of electrochemical deposition related to micro-AECM, reviews several typical micro-AECM techniques, and discusses the challenges, development trends and perspectives in micro-AECM.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Grain size and specimen thickness effects on twinning behaviors in high strain rate deformation of ultra-thin pure titanium sheet

Chengxi Zhu et al.

Summary: This research investigates the effects of grain size and specimen thickness on twinning characteristics and texture evolution in ultra-thin pure titanium sheet. The results show that twin density decreases with decreasing sample thickness and increasing grain size. Additionally, grain size has a positive effect on the activation of multiple twin variants and affects misorientation distributions. The deformation mechanism and texture evolution of ultra-thin pure titanium sheet are significantly influenced by size effects.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Automation & Control Systems

Ductile fracture behavior in micro-scaled progressive forming of magnesium-lithium alloy sheet

Jilai Wang et al.

Summary: This study investigates the progressive sheet forming of magnesium-lithium alloy sheets and predicts the ductile fracture behavior using a modified Gurson-Tvergaard-Needleman (GTN) damage model. The results show that increasing grain size deteriorates the forming defects.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Automation & Control Systems

Influence of size effect on the dynamic mechanical properties of OFHC copper at micro-/meso-scales

Chuanzhi Jing et al.

Summary: This study investigates the size effects on the dynamic mechanical properties of oxygen-free high-conductivity (OFHC) copper at the micro-/meso-scales. The results show that OFHC copper exhibits strain rate strengthening effects and the presence of micro-cracks at these scales. A modified Johnson-Cook (J-C) constitutive model considering size effects is proposed and demonstrates improved accuracy compared to the original model.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Mechanical

Microstructural and geometrical size effects on the fatigue of metallic materials

Zebang Zheng et al.

Summary: This paper presents a comprehensive overview of the correlation between size effects (SEs) and fatigue performance in metallic materials. It reviews the recent developments in SEs and their impact on low-cycle fatigue, low-cycle dwell fatigue, high-cycle fatigue, and very-high-cycle fatigue. The paper critically discusses the experimental and numerical methods used to investigate SEs, as well as their advances and limitations. Additionally, it highlights the research gap, key challenges, and prospects for future studies.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Mechanical

An insight into size effect on fracture behavior of Inconel 718 cross-scaled foils

Duo Zhang et al.

Summary: This study investigates the influence of size effect on the fracture of cross-scaled components and focuses on Inconel 718 superalloy cross-scaled foils. Through experiments and modeling, the fracture mechanism and the relationship between fracture strain, fracture stress, and t/d are revealed. In addition, a fracture threshold scattering model considering random textures is established, providing a theoretical basis for the process design of cross-scaled components.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Engineering, Mechanical

Grain size effect of FCC polycrystal: A new CPFEM approach based on surface geometrically necessary dislocations

Maoyuan Jiang et al.

Summary: This study investigates the grain size effect in FCC polycrystalline plasticity using a multiscale modeling approach combining discrete dislocation dynamics (DDD) and crystal plasticity finite element method (CPFEM). The developed model quantitatively reproduces the deformation curves of FCC polycrystals and shows significant potential for further applications.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Production of precision slots in copper foil using micro EDM

Katerina Mouralova et al.

Summary: Electrical discharge machining (EDM) is an unconventional machining technology that is suitable for producing miniaturized slits. By optimizing machine parameters and using the same semi-product as a tool, improvements in the production process can be achieved.

SCIENTIFIC REPORTS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental investigation of the multi-stage micro-deep drawing of pure titanium foils with different grain sizes

Peisheng Han et al.

Summary: A three-stage micro-deep drawing system was designed and studied to manufacture micro-drawn cups with high CH/CD ratios and high quality. The research showed that annealing at an optimal temperature of 600 degrees C resulted in cups with few wrinkles and a good shape profile. Additionally, the ironing effect in the multi-stage MDD process significantly reduced cup wrinkling.

JOURNAL OF MATERIALS SCIENCE (2022)

添加到收藏夹

Article Engineering, Mechanical

Size effect on nonlinear unloading behavior and Bauschinger effect of Ni-based superalloy ultrathin sheet

Weilin He et al.

Summary: The size effect of superalloy ultrathin sheet affects its nonlinear unloading behavior and Bauschinger effect. Increasing grain size decreases the flow stress and density of forest dislocation and moving dislocation in superalloy ultrathin sheet, and also leads to more evident degradation of elastic modulus. The Bauschinger effect and the variations of permanent softening and work-hardening stagnation in superalloy ultrathin sheet are influenced by the t/d ratio.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Mechanical

A new ductile failure criterion for micro/meso scale forming limit prediction of metal foils considering size effect and free surface roughening

Lihuang Zheng et al.

Summary: A new ductile failure criterion is proposed in this paper to accurately predict the forming limits of metal foils affected by size effect. Experimental results and comparative research demonstrate the prediction capability of the proposed failure criterion in micro/meso scale forming processes.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Chemistry, Physical

Fabrication of micro channels for titanium PEMFC bipolar plates by multistage forming process

Zhutian Xu et al.

Summary: Bipolar plates made of ultra-thin titanium sheet metals have high corrosion resistance, electrical conductivity, and strength-weight ratio, making them suitable for proton exchange membrane fuel cells used in vehicles. The stamping process is an efficient method to fabricate fine and complex sub-millimeter channel features on bipolar plates, but the aspect ratio of these micro features is limited by the low forming limit of titanium sheet metals. Improving the aspect ratio through a multistage forming process could enhance the heat and mass transfer in PEMFC, resulting in higher efficiency and performance.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

添加到收藏夹

Article Automation & Control Systems

Investigation on the forming limit diagram of AA5754-O alloy by considering strain hardening model, strain path, and through-thickness normal stress

Soheila Sojodi et al.

Summary: This study explored the precision of forming limit diagram (FLD) by investigating the effects of chosen hardening models, through-thickness normal stress, and non-linear strain path. Different hardening models were used to predict forming limits, and the influence of normal stress on FLD for various models was examined. The results showed that strain path has a significant effect on FLD, and the normal stress affects the path dependence of the forming limit stress diagram (FLSD).

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Analytical

Investigation of Size Effects in Multi-Stage Cold Forming of Metallic Micro Parts from Sheet Metal

Martin Kraus et al.

Summary: The global trend of product miniaturisation and functional integration is increasing the demand for metallic micro components. Research has shown that size effects occur during microforming, and reducing the grain size cannot eliminate these effects.

MICROMACHINES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of ultrasound on forming force in thin sheetmetal microforming using molten plastic as flexible punch

Rui-xiang Yang et al.

Summary: A new measuring force method was proposed to observe the forming force in ultrasonic microforming, showing that ultrasound can significantly reduce the forming force in Micro-USF.

MATERIALS & DESIGN (2021)

添加到收藏夹

Review Automation & Control Systems

A review on the microblanking technology of metallic foils

Kaisheng Ji et al.

Summary: This paper presents an intensive review on various microblanking processes, emphasizing the importance of micro manufacturing and the development of microblanking tools and machines in the past two decades. It highlights the importance of improving burnish depth, precision of parts, and meeting industrial applications in future research.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Industrial

Springback behavior and a new chord modulus model of copper alloy during severe plastic compressive deformation

Hongli Hou et al.

Summary: The study investigates the springback behavior of copper alloy after SPCD, revealing the effects of strain hardening, strain softening, and anisotropy on springback behavior. A new chord modulus model and 1-D ET model in a power exponential form were proposed to accurately predict the chord modulus and springback strain after SPCD. Results showed significant differences in springback behavior between SPCD and small plastic compressive deformation.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Manufacturing

Size effects in multi-scale materials processing and manufacturing

M. W. Fu et al.

Summary: Size effects are caused by changes in material parameters and can induce various behaviors and phenomena during multi-scale processing. Parts and components fabricated from multi-scale processing exhibit quality and property scatters. The paper reviews and analyzes the size effects in material processing and manufacturing, discussing future research directions and highlighting key problems to be solved.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)

添加到收藏夹

Article Automation & Control Systems

Investigation of machining and wear performance of various diamond micro-grinding tools

Wei Li et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Grain size effect on deformation mechanisms and mechanical properties of titanium

Z. W. Huang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Engineering, Manufacturing

Interactive effect of grain size and crystal structure on deformation behavior in progressive micro-scaled deformation of metallic materials

X. F. Tang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2020)

添加到收藏夹

Article Engineering, Mechanical

Analysis of size dependent earing evolution in micro deep drawing of TWIP steel by using crystal plasticity modeling

N. Guo et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Materials Science, Ceramics

Effects of nano-grain structures and surface defects on fracture of micro-scaled polysilicon components

Ran Xu et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Progressive microforming of pin-shaped plunger parts and the grain size effect on its forming quality

Jun-Yuan Zheng et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recent Developments and Trends in Sheet Metal Forming

Tomasz Trzepiecinski

METALS (2020)

添加到收藏夹

Article Engineering, Mechanical

Size effect on the subsequent yield and hardening behavior of metal foil

Jiejie Shi et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Engineering, Manufacturing

Progressive and Compound Forming for Producing Plunger-Typed Microparts by Using Sheet Metal

Jun-Yuan Zheng et al.

JOURNAL OF MICRO AND NANO-MANUFACTURING (2020)

添加到收藏夹

Article Automation & Control Systems

Micro-scaled plastic deformation behavior of biodegradable AZ80 magnesium alloy: experimental and numerical investigation

N. Srinivasan et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Size effects on material yield strength/deformation/fracturing properties

Ronald W. Armstrong

JOURNAL OF MATERIALS RESEARCH (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Study on edge cracking of copper foils in micro rolling

Jingwei Zhao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Engineering, Industrial

Study on size effect affected progressive microforming of conical flanged parts directly using sheet metals

J. Y. Zheng et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Manufacturing

Accuracy of Conventional Finite Element Models in Bulk-Forming of Micropins From Sheet Metal

M. Kraus et al.

JOURNAL OF MICRO AND NANO-MANUFACTURING (2019)

添加到收藏夹

Article Automation & Control Systems

Experimental study on size effect of dry friction in meso/micro-upsetting process

Juanjuan Han et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Mechanical

A constitutive model for metal plastic deformation at micro/meso scale with consideration of grain orientation and its evolution

Linfa Peng et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Engineering, Industrial

Size effect affected springback in micro/meso scale bending process: Experiments and numerical modeling

Zhutian Xu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Industrial

Size effect affected mechanical properties and formability in micro plane strain deformation process of pure nickel

Chuanjie Wang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Mechanical

Influence of size effect and plastic strain gradient on the springback behaviour of metallic materials in microbending process

J. L. Wang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Engineering, Mechanical

Forming limit of sheet metals in meso-scale plastic forming by using different failure criteria

L. F. Peng et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)

添加到收藏夹

Article Engineering, Mechanical

Study of deformation and ductile fracture behaviors in micro-scale deformation using a combined surface layer and grain boundary strengthening model

W. T. Li et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)

添加到收藏夹

Article Chemistry, Analytical

Handling in the Production of Wire-Based Linked Micro Parts

Philipp Wilhelmi et al.

MICROMACHINES (2017)

添加到收藏夹

Review Engineering, Manufacturing

A review of geometrical and microstructural size effects in micro-scale deformation processing of metallic alloy components

M. W. Fu et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)

添加到收藏夹

Article Engineering, Mechanical

Multivariable analysis of micro shearing process customized for progressive forming of micro-parts

B. Meng et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)

添加到收藏夹

Article Engineering, Industrial

Grain and geometry size effects on plastic deformation in roll-to-plate micro/meso-imprinting process

Zhaoyang Gao et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Importance and role of grain size in free surface cracking prediction of heavy forgings

Zhenhua Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ductile fracture and deformation behavior in progressive microforming

B. Meng et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Engineering, Mechanical

Specimen- and grain-size dependence of compression deformation behavior in nanocrystalline copper

Norihiko L. Okamoto et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of specimen and grain sizes on compression strength of annealed wrought copper alloy at room temperature

X. H. Dong et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modelling of size effects in microforming process with consideration of grained heterogeneity

H. N. Lu et al.

COMPUTATIONAL MATERIALS SCIENCE (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Meso-scaled progressive forming of bulk cylindrical and flanged parts using sheet metal

W. L. Chan et al.

MATERIALS & DESIGN (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Micro-scaled progressive forming of bulk micropart via directly using sheet metals

M. W. Fu et al.

MATERIALS & DESIGN (2013)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

MEMS and EFF technology based micro connector for future miniature devices

M. M. I. Bhuiyan et al.

5TH INTERNATIONAL CONFERENCE ON MECHATRONICS (ICOM'13) (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of specimen size on the tensile strength of WC-Co hard metal

T. Kluensner et al.

ACTA MATERIALIA (2011)

添加到收藏夹

Article Engineering, Manufacturing

Effect of specimen size and grain size on deformation in microextrusion

Sunal Ahmet Parasız et al.

Journal of Manufacturing Processes (2011)

添加到收藏夹

Proceedings Paper Engineering, Multidisciplinary

Process Chains in Microforming Technology Using Scaling Effects

Bernd Kuhfuss et al.

14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

A constitutive model for thin sheet metal in micro-forming considering first order size effects

Wang Yun et al.

MATERIALS & DESIGN (2010)

添加到收藏夹

Article Engineering, Manufacturing

SIZE EFFECTS ON MATERIAL BEHAVIOR IN MICROFORMING

C. Barbier et al.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

Influence of specimen dimensions on the tensile behavior of ultrafine-grained Cu

Y. H. Zhao et al.

SCRIPTA MATERIALIA (2008)

添加到收藏夹

Article Engineering, Mechanical

Micro press forming and assembling of micro parts in a progressive die

Ming Yang et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Size effects in thin sheet metal forming and its elastic-plastic constitutive model

Linfa Peng et al.

MATERIALS & DESIGN (2007)

添加到收藏夹

Article Engineering, Industrial

Manufacturing of lightweight components by metal forming

M Kleiner et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2003)

添加到收藏夹

Article Engineering, Industrial

Miniaturization in sheet metal working

TA Kals et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.