☆ 4.7 Article

Loading history effect on ratcheting behavior: Modelling and simulation

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mechanics

An improved kinematic hardening rule describing the effect of loading history on plastic modulus and ratcheting strain

Jiawei Bai et al.

Summary: This paper investigates the influence of loading history on ratcheting behavior and stress-strain hysteresis loops under uniaxial loading. A nonlinear constitutive model for cyclic elastoplastic behavior is developed, accounting for the effect of loading history on plastic modulus and introducing a linear function to address yield surface translation. A maximum stress memory surface is also defined to describe the ratcheting effect under multi-step loading. Quantitative results demonstrate the accuracy of the proposed model in capturing cyclic hardening, ratcheting strain and stress-strain hysteresis loops, compared to experiments and existing models.

ACTA MECHANICA (2023)

添加到收藏夹

Article Engineering, Mechanical

Ratcheting deformation and fatigue of surface treated ZK60 magnesium alloy

Ying Xiong et al.

Summary: Three surface treatment methods, including laser shock penning, micro-arc oxidation, and a combination of both, were used on extruded ZK60 magnesium alloy specimens to prepare modified layers. The ratcheting deformation behavior under different stress-controlled loading conditions was investigated, and it was found that the deformation mechanism consisted of four modes. A modified energy-based fatigue model was used to predict the fatigue life under various loading conditions.

INTERNATIONAL JOURNAL OF FATIGUE (2022)

添加到收藏夹

Article Engineering, Mechanical

A combined elastic-plastic framework unifying the various cyclic softening/hardening behaviors for heat resistant steels: Experiment and modeling

Kai Song et al.

Summary: In this study, the stress-strain responses of G115 martensitic steel, Inconel alloy 750H, and 316H austenitic steel at elevated temperatures were investigated via low cycle fatigue tests. The effects of microstructure on stress-strain responses were discussed, and a unified elastic-plastic framework was established. The results showed good consistencies between experimental and predicted results, indicating the strong capability of the model to integrate different behaviors into a constitutive model.

INTERNATIONAL JOURNAL OF FATIGUE (2022)

添加到收藏夹

Article Engineering, Mechanical

Modeling of cyclic hardening and evaluation of plastic strain range in the presence of pre-loading and ratcheting

Nobutada Ohno et al.

Summary: In this study, an extended evolution equation for cyclic hardening and a set of evolution equations for plastic strain surface were proposed to properly evaluate the cyclic plastic strain range under pre-loading and ratcheting conditions. These extensions were verified through uniaxial cyclic experiments on 316 stainless steel at 600 degrees C and proved to accurately simulate the experiments without the need for a resetting scheme if the strain range does not significantly decrease with cycles. The extended equations were also used to discuss the effect of maximum plastic strain based on previous experiments.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

添加到收藏夹

Article Engineering, Mechanical

A cyclic plasticity model for secondary hardening due to strain-induced martensitic transformation

Caina Bemfica et al.

Summary: A model for secondary cyclic hardening in metastable austenitic stainless steels due to strain-induced martensitic transformation is proposed, based on an Armstrong-Frederick type kinematic hardening framework. The model describes secondary hardening by relating backstress to martensite content evolution, incorporating a memory surface to consider the influence of plastic strain amplitude on martensitic transformation. The model accurately estimated stress response of three austenitic stainless steels under various loading conditions, discussing model characteristics, material constant determination, and future research suggestions.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

添加到收藏夹

Article Construction & Building Technology

Cyclic softening behavior of structural steel with strain range dependence

Chen Wang et al.

Summary: This study experimentally investigated the cyclic softening behavior of structural steel under seismic loading, which is influenced by the strain range dependence effect. The stress amplitudes experience loop-wise softening when the strain range drops to a lower level.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2021)

添加到收藏夹

Article Engineering, Mechanical

Universal cycle counting for non-proportional and random fatigue loading

K. G. F. Janssens

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ratcheting assessment of low yield point steel BLY160: Experimental analysis and constitutive modelling

Li-Yan Xu et al.

MECHANICS OF MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

A new damage-coupled cyclic plastic model for whole-life ratchetting of heat-treated U75V steel

Ziyi Wang et al.

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2020)

添加到收藏夹

Article Mechanics

Uniaxial ratcheting deformation of 316LN stainless steel with dynamic strain aging: Experiments and simulation

Xingyue Sun et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

An improved elasto-plastic constitutive model for the exquisite description of stress-strain hysteresis loops with cyclic hardening and softening effects

Li-Yan Xu et al.

MECHANICS OF MATERIALS (2020)

添加到收藏夹

Article Engineering, Mechanical

Cyclic deformation of 316L stainless steel and constitutive modeling under non-proportional variable loading path

Ruisi Xing et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

添加到收藏夹

Article Engineering, Mechanical

New formulation of nonlinear kinematic hardening model, Part I: A Dirac delta function approach

Volodymyr Okorokov et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

添加到收藏夹

Article Engineering, Mechanical

Resetting scheme for plastic strain range evaluation in cyclic plasticity: Experimental verification

Nobutada Ohno et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

添加到收藏夹

Article Engineering, Mechanical

New formulation of nonlinear kinematic hardening model, Part II: Cyclic hardening/softening and ratcheting

Volodymyr Okorokov et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

A critical review of experimental aspects in ratcheting fatigue: microstructure to specimen to component

Surajit Kumar Paul

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Mathematics, Applied

Resetting scheme for plastic strain surface in constitutive modeling of cyclic plasticity

Nobutada Ohno et al.

ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK (2018)

添加到收藏夹

Article Engineering, Mechanical

A modification of the multicomponent Armstrong-Frederick model with multiplier for the enhanced simulation of aerospace aluminium elastoplasticity

Dylan Agius et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Engineering, Mechanical

Experimental analysis and constitutive modelling of cyclic behaviour of 316L steels including hardening/softening and strain range memory effect in LCF regime

J. Zhou et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2018)

添加到收藏夹

Article Engineering, Mechanical

A comparative study in descriptions of coupled kinematic hardening rules and ratcheting assessment over asymmetric stress cycles

A. Varvani-Farahani

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2017)

添加到收藏夹

Article Engineering, Mechanical

A finite cyclic elasto-plastic constitutive model to improve the description of cyclic stress-strain hysteresis loops

Yilin Zhu et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Non-saturated cyclic softening and uniaxial ratcheting of a high-strength steel: Experiments and viscoplastic constitutive modeling

Qiang Wang et al.

MECHANICS OF MATERIALS (2017)

添加到收藏夹

Article Engineering, Mechanical

A finite deformation elasto-plastic cyclic constitutive model for ratchetting of metallic materials

Yilin Zhu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)

添加到收藏夹

Article Engineering, Mechanical

Uniaxial mean stress relaxation of 9-12% Cr steel at high temperature: Experiments and viscoplastic constitutive modeling

De-Long Wu et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2016)

添加到收藏夹

Article Engineering, Mechanical

Cyclic hardening and softening behavior of the low yield point steel BLY160: Experimental response and constitutive modeling

Liyan Xu et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

A kinematic hardening rule to investigate the impact of loading path and direction on ratcheting response of steel alloys

G. R. Ahmadzadeh et al.

MECHANICS OF MATERIALS (2016)

添加到收藏夹

Article Engineering, Mechanical

Analysis of uniaxial ratcheting behavior and cyclic mean stress relaxation of a duplex stainless steel

Chin-Hyung Lee et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2014)

添加到收藏夹

Article Engineering, Mechanical

Experimental and numerical analysis about the cyclic behavior of the 304L and 316L stainless steels at 350 °C

Lakhdar Taleb et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development of new cyclic plasticity model for 304LN stainless steel through simulation and experimental investigation

N. Khutia et al.

MECHANICS OF MATERIALS (2014)

添加到收藏夹

Article Engineering, Mechanical

Ratcheting assessment of materials based on the modified Armstrong-Frederick hardening rule at various uniaxial stress levels

G. R. Ahmadzadeh et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2013)

添加到收藏夹

Article Engineering, Mechanical

Viscoplastic constitutive equations of combustion chamber materials including cyclic hardening and dynamic strain aging

J. -L. Chaboche et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Uniaxial ratcheting behavior of Zircaloy-4 tubes at room temperature

Mingjian Wen et al.

MATERIALS & DESIGN (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ratcheting assessment of steel alloys under step-loading conditions

G. R. Ahmadzadeh et al.

MATERIALS & DESIGN (2013)

添加到收藏夹

Article Engineering, Mechanical

Visco-plastic constitutive modeling on Ohno-Wang kinematic hardening rule for uniaxial ratcheting behavior of Z2CND18.12N steel

Dunji Yu et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

True stress-controlled ratcheting behavior of 304LN stainless steel

Surajit Kumar Paul et al.

JOURNAL OF MATERIALS SCIENCE (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cyclic polycrystalline visco-plastic model for ratchetting of 316L stainless steel

Guozheng Kang et al.

COMPUTATIONAL MATERIALS SCIENCE (2011)

添加到收藏夹

Article Engineering, Mechanical

An evaluation for several kinematic hardening rules on prediction of multiaxial stress-controlled ratchetting

Mohammad Abdel-Karim

INTERNATIONAL JOURNAL OF PLASTICITY (2010)

添加到收藏夹

Article Engineering, Multidisciplinary

An extension for the Ohno-Wang kinematic hardening rules to incorporate isotropic hardening

Mohammad Abdel-Karim

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2010)

添加到收藏夹

Article Engineering, Mechanical

Modified kinematic hardening rules for simulations of ratchetting

Mohammad Abdel-Karim

INTERNATIONAL JOURNAL OF PLASTICITY (2009)

添加到收藏夹

Article Engineering, Mechanical

Consistency for two multi-mechanism models in isothermal plasticity

Michael Wolff et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2008)

添加到收藏夹

Article Mechanics

Multiplicative AF kinematic hardening in plasticity

Yannis F. Dafalias et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2008)

添加到收藏夹

Article Engineering, Mechanical

Investigation of subsequent viscoplastic deformation of austenitic stainless steel subjected to cyclic preloading

T Mayama et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2006)

添加到收藏夹

Article Engineering, Mechanical

On the Ohno-Wang kinematic hardening rules for multiaxial ratcheting modeling of medium carbon steel

X Chen et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2005)

添加到收藏夹

Article Mechanics

Uniaxial and non-proportionally multiaxial ratcheting of SS304 stainless steel at room temperature: experiments and simulations

GZ Kang et al.

INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cyclic creep process in AISI 316L stainless steel in terms of dislocation patterns and internal stresses

C Gaudin et al.

ACTA MATERIALIA (2004)

添加到收藏夹

Article Engineering, Mechanical

Ratchetting process in the stainless steel AISI 316L at 300 K: an experimental investigation

X Feaugas et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2004)

添加到收藏夹

Article Engineering, Mechanical

Uniaxial ratcheting of SS304 stainless steel at high temperatures: visco-plastic constitutive model

Q Gao et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Uniaxial and non-proportionally multiaxial ratcheting of U71Mn rail steel: experiments and simulations

GZ Kang et al.

MECHANICS OF MATERIALS (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

A visco-plastic constitutive model incorporated with cyclic hardening for uniaxial/multiaxial ratcheting of SS304 stainless steel at room temperature

GZ Kang et al.

MECHANICS OF MATERIALS (2002)

添加到收藏夹

Article Engineering, Mechanical

Experimental study on the cyclic deformation and plastic flow of U71Mn rail steel

GZ Kang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2002)

添加到收藏夹

Article Nuclear Science & Technology

Experimental study on uniaxial and nonproportionally multiaxial ratcheting of SS304 stainless steel at room and high temperatures

GZ Kang et al.

NUCLEAR ENGINEERING AND DESIGN (2002)

添加到收藏夹

Article Engineering, Mechanical

Kinematic hardening rules in uncoupled modeling for multiaxial ratcheting simulation

S Bari et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2001)

添加到收藏夹

Article Engineering, Mechanical

Kinematic hardening model suitable for ratchetting with steady-state

M Abdel-Karim et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2000)

添加到收藏夹

Article Engineering, Mechanical

Anatomy of coupled constitutive models for ratcheting simulation

S Bari et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.