☆ 4.7 Article

Micro/nano incremental material removal mechanisms in high-frequency ultrasonic vibration-assisted cutting of 316L stainless steel

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Engineering, Manufacturing

Friction behaviors in the metal cutting process: state of the art and future perspectives

Xiaoliang Liang et al.

Summary: This review focuses on the current state and future perspectives of research on friction behaviors in cutting procedures. It analyzes the cutting friction phenomena under extreme conditions, discusses theoretical models and the application of simulation technology, analyzes factors affecting friction behaviors, and assesses the consequences of cutting friction phenomena. Finally, it discusses the research limitations and future work for cutting friction behaviors.

INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2023)

添加到收藏夹

Article Engineering, Manufacturing

Influence of workpiece texture and strain hardening on chip formation during machining of Ti-6Al-4V alloy

Karthik Palaniappan et al.

Summary: This work investigates the influence of texture on chip formation during machining of Ti-6Al-4V alloy. Different textures were produced using cold-rolling, and the morphology of chips varied between cold-worked and annealed samples due to the developed texture. The developed texture affects the strain necessary for fracture initiation in the primary shear zone, thus affecting the spatial frequency of segmentation.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2022)

添加到收藏夹

Article Engineering, Mechanical

Sustainable cooling strategies to reduce tool wear, power consumption and surface roughness during ultrasonic assisted turning of Ti-6Al-4V

Jay Airao et al.

Summary: This article analyzes the machinability of Ti-6Al-4V in conventional and Ultrasonic Assisted Turning (UAT) under various cutting conditions. The experiments show that ultrasonic vibration, combined with MQL and LCO2, significantly reduces cutting energy while maintaining surface roughness and tool life.

TRIBOLOGY INTERNATIONAL (2022)

添加到收藏夹

Article Engineering, Manufacturing

Nanometric cutting: Mechanisms, practices and future perspectives

Fengzhou Fang et al.

Summary: Nanometric cutting is a manufacturing technology that removes material at the nanoscale to generate high-quality surfaces. It has played a vital role in advancing scientific discovery and promoting innovation in various fields. This article systematically reviews the fundamental issues, innovative methods, and challenges of nanometric cutting, while also outlining the future perspectives towards atomic scale manufacturing.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2022)

添加到收藏夹

Article Engineering, Manufacturing

Understanding the abnormal effects of ultrasonic vibration on tool wear and surface generation in Zr-based bulk metallic glass cutting

Zhimeng Chen et al.

Summary: This study demonstrates that the cutting performance of Bulk Metallic Glasses can be enhanced only within a carefully-determined window of ultrasonic amplitude. An excessive ultrasonic amplitude may violate the cutting performance.

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Optics

Fabrication of high-precision freeform surface on die steel by ultrasonic-assisted slow tool servo

Yintian Xing et al.

Summary: This paper introduces a novel machining method - one-dimensional ultrasonic-assisted slow tool servo (UASTS) turning, and successfully fabricates high-precision and large-steepness freeform surface on die steel. The tool trajectory is generated by analyzing the compensation of tool radius and confirming the position of ultrasonic displacement, and 2D surface model contours are established for predicting 3D surface topography.

OPTICS EXPRESS (2021)

添加到收藏夹

Article Engineering, Industrial

Machinability exploration for high-entropy alloy FeCrCoMnNi by ultrasonic vibration-assisted diamond turning

Lin Zhang et al.

Summary: The study found that high frequency ultrasonic vibration-assisted diamond turning can achieve better machining results in high-entropy alloy processing, including thinner chips, lower cutting forces, less tool wear, and improved surface integrity. The surface scratches were significantly reduced due to the ultrasonic vibration effect.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Analytical

An Investigation of the High-Frequency Ultrasonic Vibration-Assisted Cutting of Steel Optical Moulds

Canbin Zhang et al.

Summary: The study utilized high-frequency ultrasonic vibration-assisted cutting technique to machine spherical optical steel moulds, investigating the impact of various machining parameters on workpiece surface roughness through experiments. The surface morphology and roughness of machined moulds with different slope degrees were measured and analyzed, providing guidance for achieving optical quality on the whole surface of steel moulds with varying slope degrees.

MICROMACHINES (2021)

添加到收藏夹

Article Automation & Control Systems

Analytical, FEA, and experimental research of 2D-Vibration Assisted Cutting (2D-VAC) in titanium alloy Ti6Al4V

Rendi Kurniawan et al.

Summary: The 2D-Vibration Assisted Cutting (2D-VAC) method utilizes high-frequency vibration to enhance cutting efficiency, showing advantages over traditional cutting. Modeling and finite element analysis (FEA) results indicate differences in cutting force, stress distribution, temperature, and residual stress between 2D-VAC and TC methods. Experimental analysis also shows higher plastic strain and compressive residual stress in 2D-VAC.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Review Engineering, Manufacturing

Advancements in material removal mechanism and surface integrity of high speed metal cutting: A review

Bing Wang et al.

Summary: This paper reviews the research and application of high speed metal cutting (HSMC) with a focus on material removal mechanism, cutting force and temperature variations, and summarizes the advantages and shortcomings of HSMC.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)

添加到收藏夹

Article Engineering, Mechanical

Improvement of Ti-6Al-4V surface integrity through the use of high-speed ultrasonic vibration cutting

Zhenlong Peng et al.

Summary: High-speed ultrasonic vibration cutting (HUVC) has positive effects on the surface integrity of Ti-6Al-4V titanium alloys, including reducing surface roughness, increasing surface microhardness, and generating a thicker subsurface deformation layer. Compared to conventional cutting (CC) technique, HUVC can better improve the surface quality of titanium alloys.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Engineering, Manufacturing

Turning-induced surface integrity for a fillet radius in a 316L austenitic stainless steel

Maxime Dumas et al.

Summary: This study investigates the machining-induced surface integrity when turning a fillet radius in a 316L austenitic stainless steel. It finds that the consequences of turning are not uniform along the machined profile, with residual stresses strongly affected and microstructure highly modified over a depth of 80 μm. The study highlights the importance of average uncut chip thickness as the main governing parameter for surface integrity.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Engineering, Mechanical

Effect of the progressive tool wear on surface topography and chip formation in micro-milling of Ti-6Al-4V using Ti(C7N3)-based cermet micro-mill

Yishun Wang et al.

TRIBOLOGY INTERNATIONAL (2020)

添加到收藏夹

Review Engineering, Manufacturing

Ultrasonic vibration-assisted (UV-A) manufacturing processes: State of the art and future perspectives

Fuda Ning et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Review Engineering, Manufacturing

Review of ultrasonic vibration-assisted machining in advanced materials

Zhichao Yang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2020)

添加到收藏夹

Article Engineering, Industrial

On ductile-regime elliptical vibration cutting of silicon with identifying the lower bound of practicable nominal cutting velocity

Jianjian Wang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Industrial

Oxygen-shielded ultrasonic vibration cutting to suppress the chemical wear of diamond tools

XinQuan Zhang et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Exceptionally high strength and good ductility in an ultrafine-grained 316L steel processed by severe plastic deformation and subsequent annealing

Moustafa El-Tahawy et al.

MATERIALS LETTERS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Extreme twinning and hardening of 316L from a scalable impact process

Ankur Kumar Agrawal et al.

MATERIALS LETTERS (2018)

添加到收藏夹

Article Automation & Control Systems

Ultrasonic tooling system design and development for single point diamond turning (SPDT) of ferrous metals

Rimvydas Gaidys et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Twinning induced plasticity in austenitic stainless steel 316L made by additive manufacturing

M. S. Pham et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review of dynamic recrystallization phenomena in metallic materials

K. Huang et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Engineering, Manufacturing

Investigations on deformation and fracture behavior of workpiece material during high speed machining of 7050-T7451 aluminum alloy

Bing Wang et al.

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Industrial

Fundamental investigation of ultra-precision ductile machining of tungsten carbide by applying elliptical vibration cutting with single crystal diamond

Jianguo Zhang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions

Taku Sakai et al.

PROGRESS IN MATERIALS SCIENCE (2014)

添加到收藏夹

Article Engineering, Manufacturing

Theoretical and experimental investigation of the frictional behavior of the tool-chip interface in ultrasonic-vibration assisted turning

H. Jamshidi et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)

添加到收藏夹

Article Engineering, Manufacturing

An analytical force model for orthogonal elliptical vibration cutting technique

Xinquan Zhang et al.

Journal of Manufacturing Processes (2012)

添加到收藏夹

Article Engineering, Industrial

Experimental study on ultrasonic elliptical vibration cutting of hardened steel using PCD tools

Xinquan Zhang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)

添加到收藏夹

Article Engineering, Manufacturing

Machinability study of tungsten carbide using PCD tools under ultrasonic elliptical vibration cutting

Chandra Nath et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)

添加到收藏夹

Article Engineering, Manufacturing

Analysis of ultrasonic-assisted drilling of Ti6Al4V

J. Pujana et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)

添加到收藏夹

Article Engineering, Manufacturing

Effect of machining parameters in ultrasonic vibration cutting

Chandra Nath et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)

添加到收藏夹

Review Engineering, Multidisciplinary

Review of vibration-assisted machining

D. E. Brehl et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2008)

添加到收藏夹

Article Engineering, Electrical & Electronic

Simultaneous measurement of forces and machine tool position for diagnostic of machining tests

LNL de Lacalle et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2005)

添加到收藏夹

Article Engineering, Manufacturing

Suppression of burrs in turning with ultrasonic elliptical vibration cutting

CX Ma et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)

添加到收藏夹

Article Engineering, Manufacturing

Analysis of chatter suppression in vibration cutting

M Xiao et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.